Influence of crystallinity on the morphology of poly(ethylene oxide) containing diblock copolymers

Low-molecular-weight poly(ethylene oxide)-polyalkane (PEO-PA) diblock copolymers have been examined between the order-disorder transition and PEO melting temperature using small-angle neutron scattering (SANS), differential scanning calorimetry (DSC), and dynamic mechanical spectroscopy (DMS). Crystallization imposes layered ordering with polymer stems oriented perpendicular, or tilted, relative to the microdomain interface, thereby disrupting conventional amorphous microdomain morphologies. This effect can be used to switch the high symmetry bicontinuous ordered G phase to lower symmetry cylinders or lamellae.     

Heterocyclic polyamides containing hexafluoroisopropylidene groups

New heterocyclic polyamides have been synthesized by solution polycondensation of aromatic diamines containing phenylquinoxaline units with diacid chlorides having both imide and hexafluoroisopropylidene (6F) groups. These polymers are soluble in polar aprotic solvents, such as N-methylpyrrolidone (NMP) or N, N-dimethylformamide (DMF), and can be cast into flexible thin films from solutions. They show high thermooxidative stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 225-300°C. The polymer films exhibit good chemical resistance towards diluted acids and good electrical insulating properties with dielectric constants in the range of 3.2–3.7.     

Investigation of potential-sensitive fluorescent dyes for application in nitrate sensitive polymer membranes

The applicability of various potential-sensitive dyes (PSD) for optical sensing of anions is reported. Specifically, nitrate-responsive polymer membranes have been developed which are composed of a plasticized polymer, an anion exchange catalyst, and a fluorescent dye. On exposure to nitrate, the fluorescence intensity of such membranes increases, while the wavelengths of the excitation and emission maxima remain virtually unchanged. The membranes typically are 2–4 μm thick and exhibit highest sensitivity to nitrate in the 2 to 200 mgl^–1 range. Signal changes on exposure to 100 mmol/l nitrate can be as high as +300%. The detection limit is 0.2 mgl^–1. The cationic PSD octadecyl acridine organe was tested in combination with a tin-organic and an indium-organic anion carrier rather than with tridodecylmethylammonium chloride, but both carriers were found to display no improved selectivity. Received: 2 December 1995 / Revised: 28 March 1996 / Accepted: 5 April 1996     

Perovskites as Precursors for Ni/La2O3 Catalysts in the Dry Reforming of Methane: Synthesis by Constant pH Co‐Precipitation,Reduction Mechanism and Effect of Ru‐Doping

LaNiO₃ perovskite is an interesting precursor for Ni/La₂O₃ catalysts for the dry reforming of methane at high temperatures. Precursors have been synthesized by co‐precipitation without, with 2.5 at %, and with 5 at % Ru doping. The presence of Ru leads to a stabilization of the perovskite structure and hinders the decomposition into NiO and Ruddlesden‐Popper mixed oxides La_n+1Ni_nO_3n+1, which was observed for the Ru‐free sample upon calcination at 1000 °C (n = 3). Upon reduction in hydrogen, a mechanism involving at least two steps was observed and the first major step was identified as the partial reduction of the precursor leading to a LaNiO_2.5‐like intermediate. The second major step is the reduction to Ni metal supported on La₂O₃ independent of the Ru content of the catalyst. In the presence of Ru, indications for Ni‐Ru alloy formation and for a higher dispersion of the metallic phase were found. The catalytic activity in DRM of the catalyst containing 2.5 % Ru was superior to the catalysts with more or without Ru. Furthermore, the propensity of coke formation was reduced by the presence of Ru.     

Binding free energies in the SAMPL5 octa-acid host–guest challenge calculated with DFT-D3 and CCSD(T)

We have tried to calculate the free energy for the binding of six small ligands to two variants of the octa-acid deep cavitand host in the SAMPL5 blind challenge. We employed structures minimised with dispersion-corrected density-functional theory with small basis sets and energies were calculated using large basis sets. Solvation energies were calculated with continuum methods and thermostatistical corrections were obtained from frequencies calculated at the HF-3c level. Care was taken to minimise the effects of the flexibility of the host by keeping the complexes as symmetric and similar as possible. In some calculations, the large net charge of the host was reduced by removing the propionate and benzoate groups. In addition, the effect of a restricted molecular dynamics sampling of structures was tested. Finally, we tried to improve the energies by using the DLPNO–CCSD(T) approach. Unfortunately, results of quite poor quality were obtained, with no correlation to the experimental data, systematically too positive affinities (by ~50 kJ/mol) and a mean absolute error (after removal of the systematic error) of 11–16 kJ/mol. DLPNO–CCSD(T) did not improve the results, so the accuracy is not limited by the energy function. Instead, four likely sources of errors were identified: first, the minimised structures were often incorrect, owing to the omission of explicit solvent. They could be partly improved by performing the minimisations in a continuum solvent with four water molecules around the charged groups of the ligands. Second, some ligands could bind in several different conformations, requiring sampling of reasonable structures. Third, there is an indication the continuum-solvation model has problems to accurately describe the binding of both the negatively and positively charged guest molecules. Fourth, different methods to calculate the thermostatistical corrections gave results that differed by up to 30 kJ/mol and there is an indication that HF-3c overestimates the entropy term. In conclusion, it is a challenge to calculate binding affinities for this octa-acid system with quantum–mechanical methods.     

Bio-degradable zinc-ion battery based on a prussian blue analogue cathode and a bio-ionic liquid-based electrolyte

Rechargeable zinc-ion batteries are of high interest for electrical energy storage due to their low cost, high safety, and good energy density. The development of stable and high-performance cathode materials and environmentally friendly electrolytes is of interest for practical applications. Despite many efforts in pursuing batteries with high energy density and long cycle life, relatively little attention has been paid on the environmental aspects. Thus, bio-batteries that contain nontoxic materials and which are bio-degradable are an interesting alternative to conventional batteries. In the present paper, we present our first results on a highly reversible zinc/prussian blue analogue (PBA) bio-battery, where nanostructured PBA is used as a cathode material, a bio-degradable ionic liquid-water mixture as electrolyte, and zinc as anode. Both the PBA cathode and the zinc anode exhibit good compatibility with the bio-degradable electrolyte. The Zn/PBA battery shows good electrochemical performance including an open circuit voltage of 1.6 V, a specific capacity of ～54 mAh g^?1 (PBA), and a low self-discharge rate. The zinc anode also shows a good stability since no dendritic growth and shape change are observed after 50 charge-discharge cycles.     

New large-scale production route for synthesis of lithium nickel manganese cobalt oxide

The spray roasting process is recently applied for production of catalysts and single metal oxides. In our study, it was adapted for large-scale manufacturing of a more complex mixed oxide system, in particular symmetric lithium nickel manganese cobalt oxide (LiNi_1/3Co_1/3Mn_1/3O₂—NMC), which is already used as cathode material in lithium-ion batteries. An additional lithiation step was coupled with the main process in order to obtain the desired layered structure. Thermogravimetric analysis and high-temperature X-ray diffractometry built the basis for determining suitable synthesis temperature regions for the used chloride precursors and the post-treatment step. The optimized process was proven on an industrial pilot line where a setup for minimum production capacity of 12 kg h^?1 was possible. The powder obtained directly after roasting had a very striking morphology compared to the final lithiated product. Hollow aggregates (≥250 μm) with overall 10.926 m² g^?1 surface area and a pore diameter of 3.396 nm were observed. Their well-faceted primary particles were converted into nanosized spheres after lithiation, building a few micrometer big high-porous agglomerates. Actual composition was verified by inductively coupled plasma atomic emission spectroscopy analysis, and the crystal structure and corresponding unit cell parameters were identified and confirmed by Rietveld fit of the derived X-ray diffraction pattern. The initial electrochemical measurements show a 149-mAh g^?1discharge capacity, as determined from cyclic voltammetry.     

Evaluating the accuracy of theoretical one‐bond 13C─13C scalar couplings and their ability to predict structure in a natural product

This study explores the feasibility of using a combination of experimental and theoretical 1‐bond ¹³C─¹³C scalar couplings (¹J_CC) to establish structure in organic compounds, including unknowns. Historically, ⁿJ_CC and ⁿJ_CH studies have emphasized 2 and 3‐bond couplings, yet ¹J_CC couplings exhibit significantly larger variations. Moreover, recent improvements in experimental measurement and data processing methods have made ¹J_CC data more available. Herein, an approach is evaluated in which a collection of theoretical structures is created from a partial nuclear magnetic resonance structural characterization. Computed ¹J_CC values are compared to experimental data to identify candidates giving the best agreement. This process requires knowledge of the error in theoretical methods, thus the B3LYP, B3PW91, and PBE0 functionals are evaluated by comparing to 27 experimental values from INADEQUATE. Respective errors of ±1.2, ±3.8, and ±2.3 Hz are observed. An initial test of this methodology involves the natural product 5‐methylmellein. In this case, only a single candidate matches experimental data with high statistical confidence. This analysis establishes the intramolecular hydrogen‐bonding arrangement, ring heteroatom identity, and conformation at one position. This approach is then extended to hydroheptelidic acid, a natural product not fully characterized in prior studies. The experimental/theoretical approach proposed herein identifies a single best‐fit structure from among 26 candidates and establishes, for the first time, 1 configuration and 3 conformations to complete the characterization. These results suggest that accurate and complete structural characterizations of many moderately sized organic structures (<800 Da) may be possible using only ¹J_CC data.     

Diverse Visible-Light-Promoted Functionalizations of Benzotriazoles Inspired by Mechanism-Based Luminescence Screening

Three new visible-light-promoted functionalizations of benzotriazole substrates were discovered using a mechanism-based screening method. ortho-Thiolated, borylated, and alkylated N-arylbenzamide products were obtained under mild reaction conditions in a new denitrogenative synthetic approach to functionalized aniline derivatives. The functional group tolerance of the borylation reaction was further analyzed in the first application of an additive-based robustness screen in a photocatalytic transformation. All the functionalizations proceed via photocatalytically initiated chain mechanisms as indicated by determination of the reaction quantum yields and Stern–Volmer analyses.