Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

Determination of the Chemical Structure of Poly-β (-)-pinene by NMR Spectroscopy

This paper is dedicated to the memory of our friend and colleague Annalaura Segre.

The chemical structure of a series of β (-)-pinene polymers (PBP) obtained by radiation-induced polymerization, free radical initiation, cationic polymerization over a Friedel-Craft catalyst and by coordinative polymerization over a Ziegler-Natta catalyst has been fully elucidated by ¹H and ¹³C-NMR spectroscopy. 2D NMR techniques have been applied in order to assign all the NMR resonances to the structures of the PBP investigated. The NMR spectra show that the most regular PBP structure is obtained by radiation-induced polymerization followed by the free radical initiated polymerization. The most defective structure has been observed in the case of PBP prepared by cationic mechanism over a Friedel-Crafts catalyst. The discussion accounts for different types of defects and cross-links present in the PBPs investigated whose fundamental structure is based on the p-menthene repeating unit.

NMR self-diffusion measurements have been performed to evaluate the molecular weight of all the PBP investigated. The highest molecular weight (2600 Dalton) was found in the case of PBP prepared by Ziegler-Natta catalyst, while the lowest molecular weight was found in the case of PBP prepared by radiation-induced polymerization (about 1000 Dalton).     

Conjugated Azoalkenesi Part III. Synthesis of Sone Phosphorous Azoalkenes

Recently, some of us reviewed the synthes is and chemical reactions of conjugated azoalkenes.¹ Emphasis was placed on the fact that these derivatives represent at the same time interesting products and useful intermediates in organic chemistry. In fact, conjugated azoolefins undergo a wide range of 1,4-additions, (3+2)- and (4+2)-cycloadditions allowing various functionalizations of the carbon atom adjacent to the carbonyl group, and the construction of many types of interesting five - and six-membered heterocycles, such as widely substituted pyrrole and pyridazine rings. These relevant synthetic objectives appear not to be smoothly obtained by other procedures. In addition, many of the compounds produced from conjugated azoalkenes can profitably be employed in the preparation of natural, pharmaceutical, and phytopharmaceutical products.¹     

Chemical modification of methyl cellulose with HMDI to modulate the thickening properties in castor oil

This work deals with the selective incorporation of reactive isocyanate groups into methyl cellulose in order to be used as reactive thickening agent in castor oil. Resulting gel-like dispersions may have potential applications as green lubricating greases formulated from renewable resources. Two different isocyanate-functionalized methyl cellulose-based polymers were obtained by reaction of methyl cellulose with 1,6-hexamethylene diisocyanate. The functionalization degree, from fully functionalized to a certain number of free hydroxyl groups (58:36:6 ratio between –OMe, –NCO and free –OH groups), was controlled by modifying the reagents molar ratio. These polymers were characterized through nuclear magnetic resonance of protons (¹H-NMR), Fourier transform infrared spectroscopy and thermogravimetric analysis (TGA). Thermal and rheological responses of oleogels prepared by dispersing these polymers in castor oil were studied by means of TGA analysis and small-amplitude oscillatory shear measurements. The evolution of linear viscoelasticity functions with frequency of the oleogel containing isocyanate-functionalized methyl cellulose with lower –NCO content is quite similar to that found for traditional lithium lubricating greases. In relation to long-term stability of these oleogels, the values of viscoelastic functions significantly increase during the first 7 days of ageing and then remain almost constant.     

Synthesis of Optically Active 2- and 3-Sec-Butyl Half-Protected Succinaldehydes Through A Common Intermediate

Optically active (2RS,3S)-2-(ethanediyldioxyethyl)-3-methylpentanal (1) and (3RS,4S)-4-methyl-3-(N-methylthiazolidine-2-yl)-hexanal (2) were prepared from (3RS,4S)-4-methyl-3-(N-methyl-thiazolidine-2-yl)-1,1-ethanediyldioxyhexane.     

Photochemical Synthesis of 5-Ethynyl-5′-(1-Propynyl)-2.2′-Bithiophene

The synthesis of the title compound is described. The key-step is the photochemical coupling between 5-iodo-2-thienylcarbaldehyde and 2-bromothio-phene to give 5-bromo-2,2′-bithienyl-5′-carbaldehyde.     

Unexpected high ordering of a [60]Fullerene nitroxide in the nematic phase of 4-4′-azoxyanisole

A nitroxide [60]fullerene adduct containing a pyrrolidine-1-oxyl group has been synthesized. Its orientational order in the nematic phase of the liquid crystal solvent 4,4′-azoxyanisole (PAA) has been measured from the variation of the EPR spectral parameters on passing from the isotropic to the nematic phase. Highly resolved EPR lines allow for precise evaluation of the shifts of the g, a _N and a _H values. Since the g and the hyperfine tensors are known, the order matrix could be obtained. This is compared with the one calculated with a theoretical model based on short range solute-solvent interactions, which predicts a considerable degree of orientation of the molecular axes, despite the almost spherical shape of the molecule. The agreement with experimental findings is quite good and it is further improved if a bent structure of the pyrrolidine ring is taken into account.     

The decomposition of the oxalate precursor and the stability and reduction of the YBa2Cu4O8 superconductor studied by TG coupled with FTIR and by XRD

The 124 superconductor YBa₂Cu₄O₈ was prepared from the oxalate precursor Y₂(C₂O₄)₃. ·4BaC₂O₄·8CuC₂O₄·xH₂O at one atmosphere oxygen pressure. In O₂ the precursor decomposes in one step at 300°C and more gradually (300°–600°C) in Ar. The stability of the superconductor is strongly dependent on the gas atmosphere: in O₂ and in air there is no significant weight change as long as the temperature does not exceed 800°C, whereas in a 1% O₂-99%N₂ mixture decomposition starts at about 670°C with the formation of CuO and YBa₂Cu₃O_x withx<7. The reduction of YBa₂Cu₄O₈ in a 5% H₂-95% Ar mixture takes place in at least four major steps with formation of products such as Y₂O₃, BaO, Cu₂O, Cu, BaY₂O₄ and Ba₄Y₂O₇.     

Novel cinchona alkaloid carbamate C9-dimers as chiral anion-exchange type selectors for high-performance liquid chromatography

Nine new quinine (QN) carbamate C9-dimers (QN-X-QN), with different aliphatic and cyclic spacers (X), have been synthesized and immobilized onto porous silica gel for HPLC. The chiral discriminating behavior of these "dimeric" anion-exchange type chiral stationary phases (CSPs) has been investigated in detail, to elucidate the role of the presence of a second QN subunit on the chiral selector (SO), as well as the influence of the structure and length of the spacer, on the overall chiral recognition of a set of N-derivatized amino acids and other acidic drugs. The bulkiness of the intermediate spacer tuned the chiral recognition abilities of these SOs, with the 1,3-adamantylen-derived CSP being the one that led to the best separations. Shorter spacers reduced the chiral discrimination abilities of the "dimeric" selectors, with the n-hexylen bridge being the most favorable distance to allow a nearly independent interaction of the two QN subunits with the racemic analytes. The comparison to five "monomeric" CSPs showed that the "dimeric" ones usually retain the chiral analytes more strongly, though the enantioseparation is not improved. Nevertheless, the exceptional resolution abilities of dimeric SOs with a trans- 1,2-diaminocyclohexylen-bridge for the separation of DNP-derivatives of amino acids and certain acidic drugs of therapeutical interest (e.g., profens) seemed to be superior to most of the other CSPs.     

Cu(II) complexes with heterocyclic substituted thiosemicarbazones: the case of 5-formyluracil. Synthesis,characterization, x-ray structures,DNA interaction studies,and biological activity

Two new 5-formyluracil thiosemicarbazone (H(3)ut) derivatives, Me-H(3)ut (1) and Me(2)-H(3)ut (2), were synthesized by reacting thiosemicarbazides, mono- and dimethylated on the aminic nitrogen, with 5-formyluracil and were subsequently characterized. These ligands, treated with copper chloride and nitrate, afforded three complexes: [Cu(Me-H(3)ut)Cl(2)].H(2)O (3), [Cu(Me(2)-H(3)ut)Cl(2)].H(2)O (4), and [Cu(Me-H(3)ut)(NO(3))(OH(2))(2)]NO(3) (5). The crystal structures of these complexes have been determined by single-crystal X-ray diffraction. In 3 and 4, a similar pentacoordination is present; the copper atom is surrounded by the ligand SNO donor atoms and by two chloride ions. The structure of 5 consists of [Cu(Me-H(3)ut)(NO(3))(OH(2))(2)](+) cations and nitrate anions. The copper coordination (4 + 2) involves the SNO ligand atoms and a water oxygen in the basal plane; the apical positions are occupied by a second water oxygen and by an oxygen of a monodentate nitrate group. Two biochemical techniques, namely DNA titration in the UV-vis region and thermal denaturation, have been employed to probe the details of DNA binding of these compounds. Analysis of the results suggests that our compounds are able to interact with DNA by electrostatic and groove binding but not by intercalation. The compounds have been also tested in vitro on human leukemic cell line U937, but they are not able to inhibit significantly cell proliferation.