The influence of track modelling options on the simulation of rail vehicle dynamics

This paper investigates the effect of different models for track flexibility on the simulation of railway vehicle running dynamics on tangent and curved track. To this end, a multi-body model of the rail vehicle is defined including track flexibility effects on three levels of detail: a perfectly rigid pair of rails, a sectional track model and a three-dimensional finite element track model. The influence of the track model on the calculation of the nonlinear critical speed is pointed out and it is shown that neglecting the effect of track flexibility results in an overestimation of the critical speed by more than 10%. Vehicle response to stochastic excitation from track irregularity is also investigated, analysing the effect of track flexibility models on the vertical and lateral wheel–rail contact forces. Finally, the effect of the track model on the calculation of dynamic forces produced by wheel out-of-roundness is analysed, showing that peak dynamic loads are very sensitive to the track model used in the simulation.     

A high-voltage lithium-ion battery prepared using a Sn-decorated reduced graphene oxide anode and a LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode

This paper describes the preparation and characterization of a high-voltage lithium-ion battery based on Sn-decorated reduced graphene oxide and LiNi_0.5Mn_1.5O₄ as the anode and cathode active materials, respectively. The Sn-decorated reduced graphene oxide is prepared using a microwave-assisted hydrothermal synthesis method followed by reduction at high temperature of a mixture of (C₆H₅)₂SnCl₂ and graphene oxide. The so-obtained anode material is characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and electron diffraction spectroscopy. The LiNi_0.5Mn_1.5O₄ is a commercially available product. The two materials are used to prepare composite electrodes, and their electrochemical properties are investigated by galvanostatic charge/discharge cycles at various current densities in lithium cells. The electrodes are then used to assemble a high-voltage lithium-ion cell, and the cell is tested to evaluate its performance as a function of discharge rate and cycle number.     

Thomson scattering induced by gravitational waves

We investigate the effects of a weak gravitational wave, modelled as a gaussian wavepacket, on the polarization state of an electromagnetic field enclosed in a cavity. Our approach is semiclassical, in that the electromagnetic field is described as a quantum field, while the gravitational perturbation is treated classically, as a slightly curved background spacetime. Assuming that before the interaction the electromagnetic field has been prepared in a given polarization state, we show that – due to the gravitational scattering with the wave – some photons having different polarization states are found in the cavity at late times. Such polarization scattering has some resemblance with Thomson scattering, well-known in Quantum Electrodynamics: hence the motivation for the title. We give a numerical estimate of the resulting photon polarization spreading in the case of a typical gravitational burst from a final supernova rebound. We also briefly comment about the possible influence of such gravitational scattering on the Cosmic Microwave Background (CMB) polarization.     

Periodic orbits, damped transitions and targeted energy transfers in oscillators with vibro-impact attachments

We study complex damped and undamped dynamics and targeted energy transfers (TETs) in systems of coupled oscillators, consisting of single-degree-of-freedom primary linear oscillators (LOs) with vibro-impact attachments, acting, in essence, as vibro-impact nonlinear energy sinks (VI NESs). First, the complicated dynamics of such VI systems is demonstrated by computing the VI periodic orbits of underlying Hamiltonian systems and depicting them in appropriate frequency–energy plots (FEPs). Then, VI damped transitions and distinct ways of passive TETs from the linear oscillators to the VI attachments for various parameter ranges and initial conditions are investigated. As in the case of smooth stiffness nonlinearity [Y. Lee, G. Kerschen, A. Vakakis, P. Panagopoulos, L. Bergman, D.M. McFarland, Complicated dynamics of a linear oscillator with a light, essentially nonlinear attachment, Physica D 204 (1–2) (2005) 41–69], both fundamental and subharmonic TET can be realized in the VI systems under consideration. It is found that the most efficient mechanism for VI TET is through the excitation of highly energetic VI impulsive orbits (IOs), i.e., of periodic or quasiperiodic orbits corresponding to zero initial conditions except for the initial velocities of the linear oscillators. In contrast to NESs with smooth essential nonlinearities considered in previous works, VI NESs are capable of passively absorbing and locally dissipating significant portions of the energies of the primary systems to which they are attached, at fast time scale. This renders such devices suitable for applications, like seismic mitigation, where dissipation of vibration energy in the early, highly energetic regime of the motion is a critical requirement.     

Effect of Bohm potential on a charged gas

Bohm’s interpretation of Quantum Mechanics leads to the derivation of a Quantum Kinetic Equation (QKE): in the present work, propagation of waves in charged quantum gases is investigated starting from this QKE. Dispersion relations are derived for fully and weakly degenerate fermions and bosons (for the latter above critical temperature) and the differences discussed. Use of a kinetic equation permits investigation of “Landau-type” damping: it is found that the presence of damping in fermion gases is dependent upon the degree of degeneracy, whereas it is always present in boson gases. In fully degenerate fermions a phenomenon appears that is akin to the “zero sound” propagation.     

Novel solvable many-body problems

Novel classes of dynamical systems are introduced, including many-body problems characterized by nonlinear equations of motion of Newtonian type (“acceleration equals forces”) which determine the motion of points in the complex plane. These models are solvable, namely their con?guration at any time can be obtained from the initial data by algebraic operations, amounting to the determination of the zeros of a known time-dependent polynomial in the independent variable z. Some of these models are multiply periodic, isochronous or asymptotically isochronous; others display scattering phenomena.     

Two-step generalised empirical likelihood inference for semiparametric models

This paper shows how the generalised empirical likelihood method can be used to obtain valid asymptotic inference for the finite dimensional component of semiparametric models defined by a set of moment conditions. The results of the paper are illustrated using three well-known semiparametric regression models: partially linear single index, linear transformation with random censoring, and quantile regression with random censoring. Monte Carlo simulations suggest that some of the proposed test statistics have competitive finite sample properties. The results of the paper are applied to test for functional misspecification in a hedonic price model of a housing market.     

Electrochemical behavior of active surface layers in AA8xxx aluminum alloys

AA8xxx alloys employed in the HVAC&R sector (heating, ventilating, air conditioning, and refrigerating) were investigated to highlight the effect of active surface layers in heat-exchanger fins. The local behavior of the surface and the bulk of the alloy sheets was studied by means of an electrochemical microcell in combination with glow-discharge optical-emission spectrometry. Surface layers strongly enhance the electrochemical activity of the fin material. This is related to the segregation of Mg and other elements (Sn) strongly impairing the protective behavior of the oxide film generated during thermomechanical processing.     

Versatile, diastereoselective additions of silyl ketene acetals, allyl tributylstannane, and Me(3)SiCN to N-acyl pyrazolines: asymmetric synthesis of densely functionalized pyrazolidines

We report the diastereoselective addition of a wide range of nucleophiles to chiral pyrazolines to provide facile access to a range of useful densely functionalized building blocks for asymmetric synthesis. Coupled with the asymmetric cycloaddition reaction of Me(3)SiCHN(2) to chiral acrylates, access to these chiral heterocycles is considerably expanded.