Characterization of foxing stains in early twentieth century photographic and paper materials

Abstract

The subject of this present work is a group of nine historical pictures shot in Palermo by the Sicilian photographer E. Interguglielmi in 1912. They are nine matte-collodion prints mounted on the original cardboard supports and all of them show foxing stains affecting the paper surface. In order to characterise the chemical composition of the supports and investigate foxing spots, non-destructive and micro-destructive analysis were carried out. X-rays fluorescence (XRF) analysis was used to characterise the elemental composition of all the mounting boards, allowing a comparison between the foxing spots and non-affected areas. Laser-Induced Breakdown Spectroscopy was used to investigate the presence of lower atomic number elements, not detectable by XRF, while SEM imaging allowed the investigation of surface appearance and nature of original paper samples from the cardboards.     

Application of microemulsions for the removal of synthetic resins from paintings on canvas

Abstract

Traditional cleaning methods with organic solvents often are not suitable for removal of aged resin so researchers have to find new formulations. In this work, a case study is reported in which new microemulsions were applied on the surface of a painting covered by some aged resin layers used during a previous restoration. Based on the quality of the intervention and the analysis of a sample of the varnish carried out with both MALDI-TOF and ATR-IR spectrometers, it was conjectured that this undesired material could be an acrylic polymer. So it was chosen to use xylene, ethyl acetate and propylene carbonate (XYL and EAPC) microemulsions (O/W oil in water). The first is able to solubilise only acrylic polymers, the second may solve both acrylic and vinyl resins. The first has had the greatest effect allowing complete varnish removal and original artwork restoration.     

Surface and volume non-invasive methods for the structural monitoring of the bass-relief ‘Madonna con Bambino’ (Gorizia,Northern Italy)

Abstract

Structural analysis of marble statues, carried out by non-invasive and in situ methods, is crucial to define the state of conservation of the artworks and to identify the deterioration phenomena that can affect them. In this work, we combined in situ non-destructive techniques, ultrasonic tomography (US), ultraviolet-induced visible fluorescence (UV-IF) and X-ray fluorescence (XRF) to study the bass-relief ‘Madonna con Bambino’ (Gorizia, Italy). The US revealed the presence of some metallic pivots, associated with areas of high sound velocity; moreover, a more degraded area has been identified in the lower part of the bass-relief. The acquired UV-IF image confirmed the presence of surface degradation, allowing a preliminary evaluation of the extension of a fracture, from surface to bulk. In addition, the different materials (both original and/or integrations) that compose the studied surface have been identified. The XRF has contributed to define the nature of the inorganic materials applied during undocumented previous restoration works on the surface as filler for lacunae.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.     

Reactions of Organic Azides with Half‐sandwich Complexes of Iridium: Preparation of Mono‐ and Bis(imine) Derivatives

Imine complexes [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}{P(OR)₃}]BPh₄ ( 1 , 2 ) (Ar = C₆H₅, 4‐CH₃C₆H₄; R = Me, Et) were prepared by allowing chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] to react with benzyl azides ArCH₂N₃. Bis(imine) complexes [Ir(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂{P(OR)₃}](BPh₄)₂ ( 3 , 4 ) were also prepared by reacting [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] first with AgOTf and then with benzyl azide. Depending on the experimental conditions, treatment of the dinuclear complex [IrCl₂(η⁵‐C₅Me₅)]₂ with benzyl azide yielded mono‐ [IrCl₂(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}] ( 5 ) and bis‐[IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂]BPh₄ ( 6 ) imine derivatives. In contrast, treatment of chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] with phenyl azide C₆H₅N₃ gave amine derivatives [IrCl(η⁵‐C₅Me₅)(C₆H₅NH₂){P(OR)₃}]BPh₄ ( 7 , 8 ). The complexes were characterized spectroscopically (IR, NMR) and by X‐ray crystal structure determination of [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)C₆H₄‐4‐CH₃}{P(OEt)₃}]BPh₄ ( 2b ).     

Colloidally Stable CdS Quantum Dots in Water with Electrostatically Stabilized Weak-Binding,Sulfur-Free Ligands

Colloidal quantum dot (QD) photocatalysts have the electrochemical and optical properties to be highly effective for a range of redox reactions. QDs are proven photo-redox catalysts for a variety of reactions in organic solvents but are less prominent for aqueous reactions. Aqueous QD photocatalysts require hydrophilic ligand shells that provide long-term colloidal stability but are not so tight-binding as to prevent catalytic substrates from accessing the QD surface. Common thiolate ligands, which also poison many co-catalysts and undergo photo-oxidative desorption, are therefore often not an option. This paper describes a framework for the design of water-solubilizing ligands that are in dynamic exchange on and off the QD surface, but still provide long-term colloidal stability to CdS QDs. The binding affinity and inter-ligand electrostatic interactions of a bifunctional ligand, aminoethyl phosphonic acid (AEP), are tuned with the pH of the dispersion. The key to colloidal stability is electrostatic stabilization of the monolayer. This work demonstrates a means of mimicking the stabilizing power of a thiolate-bound ligand with a zwitterionic tail group, but without the thiolate binding group.     

Crossing VIMP and EIS for studying heterogeneous sets of copper/bronze coins

Journal of Solid State Electrochemistry - Electrochemical impedance spectroscopy (EIS) and voltammetry of immobilized particles (VIMP) measurements using air-saturated mineral water and...     

Unraveling the dynamics of the C(3P,1D) + C2H2 reactions by the crossed molecular beam scattering technique

A detailed investigation of the dynamics of the reactions of ground- and excited-state carbon atoms, C(3P) and C(1D), with acetylene is reported over a wide collision energy range (3.6-49.1 kJ mol-1) using the crossed molecular beam (CMB) scattering technique with electron ionization mass spectrometric detection and time-of-flight (TOF) analysis. We have exploited the capability of (a) generating continuous intense supersonic beams of C(3P, 1D), (b) crossing the two reactant beams at different intersection angles (45, 90, and 135 degrees ) to attain a wide range of collision energies, and (c) tuning the energy of the ionizing electrons to low values (soft ionization) to suppress interferences from dissociative ionization processes. From angular and TOF distribution measurements of products at m/z=37 and 36, the primary reaction products of the C(3P) and C(1D) reactions with C2H2 have been identified to be cyclic (c)-C3H + H, linear (l)-C3H + H, and C3 + H2. From the data analysis, product angular and translational energy distributions in the center-of-mass (CM) system for both the linear and cyclic C3H isomers as well as the C3 product from C(3P) and for l/c-C3H and C3 from C(1D) have been derived as a function of collision energy from 3.6 to 49.1 kJ mol-1. The cyclic/linear C3H ratio and the C3/(C3 + c/l-C3H) branching ratios for the C(3P) reaction have been determined as a function of collision energy. The present findings have been compared with those from previous CMB studies using pulsed beams; here, a marked contrast is noted in the CM angular distributions for both C3H- and C3-forming channels from C(3P) and their trend with collision energy. Consequently, the interpretation of the reaction dynamics derived in the present work contradicts that previously proposed from the pulsed CMB studies. The results have been discussed in the light of the available theoretical information on the relevant triplet and singlet C3H2 ab initio potential energy surfaces (PESs). In particular, the branching ratios for the C(3P) + C2H2 reaction have been compared with the available theoretical predictions (approximate quantum scattering calculations and quasiclassical trajectory calculations on ab initio triplet PESs and, very recent, statistical calculations on ab initio triplet PESs as well as on ab initio triplet/singlet PESs including nonadiabatic effects, that is, intersystem crossing). While the experimental branching ratios have been corroborated by the statistical predictions, strong disagreement has been found with the results of the dynamical calculations. The astrophysical implications of the present results have been noted.     

Effect of ortho-SR groups on O-H bond strength and H-atom donating ability of phenols: a possible role for the Tyr-Cys link in galactose oxidase active site?

Rotation about the Ar-S bond in ortho-(alkylthio)phenols strongly affects the bond dissociation enthalpy (BDE) and the reactivity of the OH group. Newly synthesized sulfur containing heterocycles 3 and 4, where the -SR group is almost coplanar with the phenolic ring, are characterized by unusually low BDE(O-H) values (79.6 and 79.2 kcal/mol, respectively) and by much higher reactivities toward peroxyl radicals than the ortho-methylthio derivative 1 (82.0 kcal/mol). The importance of the intramolecular hydrogen bond (IHB) in determining the BDE(O-H) was demonstrated by FT-IR experiments, which showed that in heterocycles 3 and 4 the IHB between the phenolic OH group and the S atom is much weaker than that present in 1. Since the IHB can be formed only if the -SR group adopts an out-of-plane geometry, this interaction is possible only in the methylthio derivative 1 and not in 3 and 4. The additive contribution to the phenolic BDE(O-H) of the -SR substituent therefore varies from -3.1 to +2.8 kcal/mol for the in-plane and out-of-plane conformations, respectively. These results may be relevant to understanding the role of the tyrosine-cysteine link in the active site of galactose oxidase, an important enzyme that catalyzes the two-electron aerobic oxidation of primary alcohols to aldehydes. The switching of the ortho -SR substituent between perpendicular and planar conformations may account for the catalytic efficiency of this enzyme.     

A cube in a tetrahedron: microwave-assisted synthesis of an octametallic Fe(III) cluster

The microwave-assisted reaction of Fe(O2CMe)2 with salicylaldoxime (saoH2) in pyridine produces an octametallic cluster in crystalline form in 2 min. The core describes a cube encapsulated in a tetrahedron, while sao2- exhibits a novel coordination mode.