Stereocomplementary Routes to Hydroxylated Nitrogen Heterocycles: Total Syntheses of Casuarine,Australine, and 7‐epi‐Australine

Addition of lithiated 1‐benzyloxyallene to a D ‐arabinose‐derived cyclic nitrone occurred with perfect diastereoselectivity furnishing a bicyclic 1,2‐oxazine derivative, which is an excellent precursor for pyrrolizidine alkaloids hydroxylated at C‐7 with optional configuration at this stereogenic center. Depending on the stage of the N? O bond cleavage and ring re‐closure, 7‐hydroxypyrrolizidines with 7R or 7S configuration were obtained, as a result of completely selective addition reactions occurring complementarily at the bottom or top face of the endocyclic C? C double bond in six‐ and five‐membered B rings, respectively. Applicability of these stereodivergent routes to obtain polyhydroxy pyrrolizidine alkaloids is demonstrated by the efficient syntheses of casuarine and australine as examples of the two classes of diversely configured 7‐hydroxypyrrolizidine alkaloids. An alternative synthesis of australine and two strategies for the preparation of 7‐epi‐australine are also reported, which demonstrate that the stereoselectivity of hydride reduction of an exocyclic C? O double bond is independent of the ring size, occurring preferentially from the top face either in a six‐ or five‐membered ring.     

Poly(ester urethane) guides for peripheral nerve regeneration

A biocompatible and elastomeric PU was synthesized from low-molecular-weight PCL as macrodiol, CMD as chain extender and HDI as chain linker for applications in the field of peripheral nerve repair. PU cast films supported in vitro attachment and proliferation of NOBEC. The in vitro adhesion and proliferation of S5Y5 neuroblastoma cells on the inner surface of uncoated, gelatin- and PL-coated PU guides were compared. Due to their superior in vitro performance, PL-coated PU guides were tested in vivo for the repair of 1.8 cm-long defects in rat sciatic nerves. The progressive regeneration was confirmed by EMG and histological analysis showing the presence of regenerating fibers in the distal stumps.     

Asymmetric addition of phenylboronic acid to cycloalkanones mediated by a Rh/phosphoramidite complex: a comparison between tropos versus nontropos behavior

Herein we report the asymmetric addition of phenylboronic acid to different cycloalkenones, mediated by a Rh(I) complex with the tropos phosphoramidite (S)-L₁ or the nontropos phosphoramidite (S)-L₂ ligand. Different values of enantiomeric purity of the 3-phenylcycloalkanone products have been obtained, mainly depending on the ring size of the substrates, with (S)-L₁ affording higher ee values than (S)-L₂. These results could be explained by reasoning that for the tropos phosphoramidite, a ‘chiral pocket’ is formed when the ligand links to the metal atom. By fitting in this pocket, the substrate can stereoselectively coordinate to the Rh(I) atom, undergoing attack of the phenyl ring from the phenylboronic acid to a preferred enantioface. This causes the high (up to 96%) values of enantioselectivity observed with some of the substrates. A ‘chiral pocket’ cannot be formed with the nontropos ligand (S)-L₂ and, as a consequence, the stereoselectivity is greatly reduced.     

Hydration process of cement in the presence of a cellulosic additive. A calorimetric investigation

In the cement industry, the extrusion technique is used to produce flat shapes with improved resistance to compression. Extrusion is a plastic-forming process that consists of forcing a highly viscous plastic mixture through a shaped die. The material should be fluid enough to be mixed and to pass through the die, and on the other hand, the extruded specimen should be stiff enough to be handled without changing in shape or cracking. These characteristics are industrially obtained by adding cellulosic polymers to the mixture. The aim of this work is to understand the action mechanism of these additives on the major pure phases constituting a typical Portland cement: tricalcium silicate (C(3)S), dicalcium silicate (C(2)S), tricalcium aluminate (C(3)A), and tetracalcium iron-aluminate (C(4)AF). In particular, a methylhydroxyethyl cellulose (MHEC) was selected from the best-performing polymers for further study. The effect of this additive on the hydration kinetics (rate constants, activation energies, and diffusional constants) was evaluated by means of differential scanning calorimetry (DSC) while the hydration products were studied by using thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). MHEC addition in calcium silicate pastes produces an increase in the induction time without affecting the nucleation-and-growth period. A less dense CSH gel was deduced from the diffusional constants in the presence of MHEC. Moreover, CSH laminar features and poorly structured hydrates were noted during the first hours of hydration. In the case of the aluminous phases, the additive inhibits the growth of stable cubic hydrated phases (C(3)AH(6)), with the advantage of the metastable hexagonal phases being formed in the earliest minutes of hydration.     

Ozone monitoring in a Mediterranean forest using diffusive and continuous sampling

Ambient ozone was measured in a forest in Castelporziano (Italy) characterised by the prevailing presence of Holm-oak trees (Quercus ilex L.) from June to November 2003. Two methods for measuring ozone were used: long-term monitoring using diffusive samplers at three heights within the canopy, and continuous monitoring at two heights using the UV method. Results for one week mean ozone levels above and below the canopy from the diffusive samplers were compared to those obtained using the automatic analyser at the same levels. A good correlation between the two sampling techniques was found. Continuous monitoring showed a daily cycle with a midday maximum and a nocturnal minimum. While the forest floor consistently had the lowest ozone concentration, there were no differences during most daytime hours. The midday maximum is clearly due to downward mixing with O₃-rich air from above. The night-time ozone decay within the canopy is the result of dry deposition of O₃ and most likely due to reaction with biogenically produced NO. AOT40 within and above the canopy mostly exceeded the critical levels.     

Modified micellar electrokinetic chromatography in the analysis of catechins and xanthines in chocolate

Modified micellar electrokinetic chromatography (MEKC) analysis of monomeric flavanols (catechin and epicatechin) and methylxanthines (caffeine and theobromine) in chocolate and cocoa was performed by using sodium dodecyl sulfate (SDS) as a principal component of the running buffer. Because of the reported poor stability of catechins in alkaline solutions, acidic conditions (pH 2.5) were chosen and consequently the electroosmotic flow (EOF) was significantly suppressed; this resulted in a fast anodic migration of the analytes partitioned into the SDS micelles. Under these conditions, variations of either pH value in acidic range or SDS concentration, showed to be not suitable to modulate the selectivity. To overcome this limit, use of additives to the SDS-based running buffer was successfully applied and three different systems were optimized for the separation of (+)-catechin, (-)-epicatechin, caffeine, and theobromine in chocolate and cocoa powder samples. In particular, two mixed micelle systems were applied; the first consisted of a mixture of SDS and 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate (CHAPS) with a composition of 90 mM and 10 mM, respectively; the second was SDS and taurodeoxycholic acid sodium salt (TDC) with a composition of 70 mM and 30 mM, respectively. A further MEKC approach was developed by addition of 10 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to the SDS solution (90 mM); it provided a useful cyclodextrin(CD)-modified MEKC. By applying the optimized conditions, different separation profiles of the flavanols and methylxanthines were obtained showing interesting potential of these combined systems; their integrated application showed to be useful for the identification of the low level of (+)-catechin in certain real samples. The CD-MEKC approach was validated and applied to the determination of catechins and methylxanthines in aqueous extracts from four different commercial chocolate types (black and milk) and two cocoa powders.     

Analysis of egg-based model wall paintings by use of an innovative combined dot-ELISA and UPLC-based approach

The chemical analysis of egg-based wall paintings—the mezzo fresco technique—is an interesting topic in the characterisation of organic binders. A revised procedure for a dot-enzyme-linked immunosorbent assay (dot-ELISA) able to detect protein components of egg-based wall paintings is reported. In the new dot-ELISA procedure we succeeded in maximizing the staining colour by adjusting the temperature during the staining reaction. Quantification of the colour intensity by visible reflectance spectroscopy resulted in a straight line plot of protein concentration against reflectance in the wavelength range 380–780 nm. The modified dot-ELISA procedure is proposed as a semi-quantitative analytical method for characterisation of protein binders in egg-based paintings. To evaluate its performance, the method was first applied to standard samples (ovalbumin, whole egg, egg white), then to model specimens, and finally to real samples (Giotto’s wall paintings). Moreover, amino acid analysis performed by innovative ultra-performance liquid chromatography was applied both to standards and to model samples and the results were compared with those from the dot-ELISA tests. In particular, after protein hydrolysis (24 h, 114 °C, 6 mol L^?1 HCl) of the samples, amino acid derivatization by use of 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate enabled reproducible analysis of amino acids. This UPLC amino acid analysis was rapid and reproducible and was applied for the first time to egg-based paintings. Because the painting technique involved the use of egg-based tempera on fresh lime-based mortar, the study enabled investigation of the effect of the alkaline environment on egg-protein detection by both methods.