On the convergence of isolated neutral oxygen vacancy and divacancy properties in metal oxides using supercell models

The properties of isolated neutral oxygen vacancies and divacancies of metal oxides of increasing complexity (MgO, CaO, alpha-Al2O3, and ZnO) have been studied by means of density-functional theory within a supercell periodic approach. Vacancy formation energies, vacancy-vacancy interactions, and geometry rearrangements around these point defects have been investigated in detail. The characterization of the electronic structure of these point defects has been established by analysis of the density of states and of the topology of the electron density and of electron localization function. It is found that the chemical character of the oxide determines the properties of the oxygen vacancies. For the covalent ZnO oxide, a more complex scheme arises in which the relaxation around the oxygen vacancy is much larger leading to the formation of Zn4-like almost metallic particles in the crystal. The relationship of these structures with the crystal shear planes is discussed. The present study shows that supercells containing approximately 200-300 atoms provide converged values for the geometric and electronic structure of oxygen vacancies of these metal oxides in the point defect low concentration limit.     

Structure and dynamics of MG rubber studied by dynamic mechanical analysis and solid‐state NMR

Methyl‐methacrylate‐grafted natural rubber was prepared by free radical polymerization of methyl methacrylate in natural rubber latex, and their structure and dynamics were investigated by dynamic mechanical analysis and solid‐state nuclear magnetic resonance (NMR). Samples were prepared by chemical initiation and high‐energy radiation. The changes of glass transition temperature and tan δ max with different total poly(methyl methacrylate (PMMA) content are reported. The effect of the change in composition in copolymers on tan δ peak width, tan δ max, and area under the tan δ curve are used to understand the miscibility and damping properties. Solid‐state ¹³C‐NMR measurements were carried out to determine several relaxation time parameters, such as rotating frame and laboratory frame proton and carbon relaxation times. Cross polarization times and carbon relaxation times were interpreted based on the changes in the molecular motion. Proton relaxation times were interpreted based on the heterogeneity of the matrix. Results confirmed phase separation and a presence of an interfacial region. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1141–1153, 1999     

Validated, non-destructive and environmentally friendly determination of cocaine in euro bank notes

A non-destructive, fast and environmentally friendly procedure has been developed for cocaine determination in euro bank notes. Cocaine was extracted with 15 ml methanol by vortex agitation during 5 min. The extract was evaporated and reconstituted in 0.5 ml methanol. GC-MS-MS analysis was performed using as precursor ion m/z 182.2, with an excitation energy voltage of 1.60 eV, being the product ions measured m/z 150.2 and 82.0. A limit of detection of 0.15 ng per note and a repeatability of 6%, established from the relative standard deviation, of a 1 ng ml(-1) level, were achieved. Recoveries of 101+/-2 and 98+/-3% were obtained for samples spiked with 100 and 10 microg respectively. Results show that all the euro bank notes measured (16 samples) were contaminated with cocaine in the range between 1.25 and 889 microg. Two different contamination levels, high level (150-889 microg) and low one (1.25-77 microg) were found and it could be related with the direct or indirect contact with the drug.     

Chemisorption of atomic hydrogen on rhodium: An ab initio cluster-model approach

Interaction of atomic hydrogen with cluster models simulating the Rh(111) surface has been studied at the ab initio SCF level using relativistic non-empirical pseudopotentials and moderately large basis sets. From the bonding parameters, it is seen that chemisorption on the threefold open position is five times more favoured than on the threefold eclipsed one, and the bonding picture is rather different for both active sites. Since two different kinds of adsorbed hydrogen atoms should exist according to various experimental techniques, the present work adds further evidence to the existence of these two types of adsorption and reports some structural parameters which can help to a more detailed characterization in the near future.     

4,2-Ribbon like ferromagnetic cyano-bridged Fe(III)2Ni(II) chains: a magneto-structural study

The low-spin iron(III) complex AsPh(4)[Fe(III)(bpy)(CN)(4)].CH(3)CN (1) [AsPh(4) = tetraphenylarsonium cation] and the heterobimetallic chains [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)].4H(2)O with L = bpy (2) and phen (3) [bpy = 2,2'-bipyridine and phen = 1,10-phenanthroline] have been prepared and their structures determined by X-ray diffraction methods. The structure of 1 consists of mononuclear [Fe(bpy)(CN)(4)](-) anions, tetraphenylarsonium cations and acetonitrile molecules of crystallization. The iron(III) is hexacoordinated with two nitrogen atoms of the bidentate bpy and four carbon atoms of four terminal cyanide groups building a distorted octahedral surrounding around the metal atom. 2 and 3 are isomorphous compounds whose structure is made up of neutral 4,2-ribbon like bimetallic chains of formula [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)] where the [Fe(III)(L)(CN)(4)](-) unit acts as a bis-monodentate bridging ligand toward the trans-diaquanickel(II) units through two of its four cyanide groups in cis positions. The chains exhibit two orientations in the unit cell and they interact with each other through hydrogen bonds involving the coordination and crystallization water molecules together with the uncoordinated cyanide nitrogen atoms of the [Fe(L)(CN)(4)](-) units. Compounds 2 and 3 behave as ferromagnetic Fe(III)(2)Ni(II) chains which interact ferromagnetically at very low temperatures in the case of 2, whereas metamagnetic-like behaviour is observed for with a critical field (H(c)) around 200 G. For H > H(c) the ferromagnetic Fe(III)(2)Ni(II) chains of 3 exhibit a frequency dependence of the out-of-phase ac susceptibility signal at T < 3.5 K.     

Trace determination of cannabinoids and opiates in wastewater and surface waters by ultra-performance liquid chromatography-tandem mass spectrometry

A fast and reliable method using solid-phase extraction and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) has been developed for the simultaneous detection, identification and quantification of several central nervous system depressor drugs of abuse such as cannabinoids (Delta9-tetrahydrocannabinol, THC) and opiates (morphine, codeine, heroin, methadone, fentanyl) and their metabolites in water samples. Compounds were extracted from water by using Oasis HLB cartridges. After SPE enrichment, the selected depressor drugs, under UPLC optimized conditions, were separated in less than 8 min. Electrospray (ESI) tandem MS in positive ion mode and selected reaction monitoring was used for quantification. ESI-MS/MS conditions such as capillary and cone voltages, source and desolvation temperatures and cone and desolvation gas flow rates have been optimized and MS and MS/MS spectra of the studied compounds were obtained. At the working conditions four identification points were obtained as required by European Union guidelines for analysis by LC-MS/MS. Quality parameters (intra-day and inter-day precisions) for each analyte have been established in three different matrixes (purified, surface and waste waters). Recoveries were generally higher than 70% and instrumental quantification limits and limits of quantification were in the low pg and ng/l range, respectively. Finally, the method has been applied to the analysis of influent and effluents wastewaters and natural water samples from Catalonia (NE Spain) where the presence of several opiates such as morphine, codeine, norcodeine 2-ethylene-1,5-dimethyl-3,3-diphenylpyrrolidine and methadone and cannnabinoids such as THC and 11-nor-carboxy-Delta9-tetrahydrocannabinol has been demonstrated.     

Synthesis, crystal structure and magnetic properties of novel heterobimetallic malonate-bridged MIIReIV complexes (M = Mn, Fe, Co and Ni)

Five novel ReIV-MII bimetallic complexes of formula [ReCl4(mu-mal)M(dmphen)2].MeCN [M = Co (1), Fe (2) and Ni (3)], [ReCl4(mu-mal)Ni(dmphen)(MeCN)2(H2O)].(MeCN)0.5(H2O)0.5 (4), and [ReCl4(mu-mal)Mn(dmphen)(H2O)2].dmphen.MeCN.H2O (5) (mal = malonate dianion, dmphen = 2,9-dimethyl-1,10-phenanthroline) have been synthesized, and the structures of 1, 2, 4, and 5 determined by single-crystal X-ray diffraction. The structures of 1 and 2 consist of neutral [ReCl4(mu-mal)M(dmphen)2] dinuclear units where the metal ions are linked through a malonate ligand which adopts simultaneously the bidentate (at ReIV) and monodentate (at MII) coordination modes. The bridging carboxylate-malonate group in them exhibits the anti-syn conformation. The rhenium atom is six-coordinated with four chloro atoms and two carboxylate-oxygens from a bidentate malonate group in a distorted octahedral environment. The M atom is five-coordinated being surrounded by four nitrogen atoms of two bidentate dmphen ligands and one oxygen atom of the malonato ligand. There are also ReIV(mu-mal)NiII dinuclear units in 4 with the same type of bridge, but the nickel atom is six-coordinated with one bidentate dmphen, two molecules of acetonitrile and one water molecule as peripheral ligands. Compound 5 is a neutral chain compound with regular alternating rhenium(IV) and manganese(II) ions. The [ReCl4(mal)]2- units in each chain act as bismonodenate ligands through two carboxylate-oxygen atoms toward [Mn(dmphen)(H2O)2]2+ entities. Variable-temperature magnetic measurements of 1-5 in the temperature range 2.0-300 K show the occurrence of weak antiferromagnetic interactions which are rationalized on the basis of the structural knowledge and simple orbital considerations. Very noticeable is compound 5, a ferrimagnetic chain with regular alternating ReIV and MnII cations.     

Mono- and Binuclear Copper(II) and Nickel(II) Complexes with the 3,6-Bis(picolylamino)-1,2,4,5-Tetrazine Ligand

Four new compounds of formulas [Cu(hfac)₂(L)] (1), [Ni(hfac)₂(L)] (2), [{Cu(hfac)₂}₂(µ-L)]·2CH₃OH (3) and [{Ni(hfac)₂}₂(µ-L)]·2CH₃CN (4) [Hhfac = hexafluoroacetylacetone and L = 3,6-bis(picolylamino)-1,2,4,5-tetrazine] have been prepared and their structures determined by X-ray diffraction on single crystals. Compounds 1 and 2 are isostructural mononuclear complexes where the metal ions [copper(II) (1) and nickel(II) (2)] are six-coordinated in distorted octahedral MN₂O₄ surroundings which are built by two bidentate hfac ligands plus another bidentate L molecule. This last ligand coordinates to the metal ions through the nitrogen atoms of the picolylamine fragment. Compounds 3 and 4 are centrosymmetric homodinuclear compounds where two bidentate hfac units are the bidentate capping ligands at each metal center and a bis-bidentate L molecule acts as a bridge. The values of the intramolecular metal···metal separation are 7.97 (3) and 7.82 Å (4). Static (dc) magnetic susceptibility measurements were carried out for polycrystalline samples 1–4 in the temperature range 1.9–300 K. Curie law behaviors were observed for 1 and 2, the downturn of χ_MT in the low temperature region for 2 being due to the zero-field splitting of the nickel(II) ion. Very weak [J = −0.247(2) cm⁻¹] and relatively weak intramolecular antiferromagnetic interactions [J = −4.86(2) cm⁻¹] occurred in 3 and 4, respectively (the spin Hamiltonian being defined as H = −JS₁·S₂). Simple symmetry considerations about the overlap between the magnetic orbitals across the extended bis-bidentate L bridge in 3 and 4 account for their magnetic properties.     

Properties of In situ polymerized poly(3,4‐ethylenedioxythiophene)/alumina composites for energy storage applications

Composites formed by poly(3,4‐ethylenedioxythiophene) and alumina (PEDOT/Al₂O₃) have been prepared by in situ anodic polymerization. For this purpose, the stability of 1:1 and 4:1 monomer:alumina aqueous solutions has been examined as a function of the pH (2.3, 4.0, 7.0, 8.8, or 10.8). Results indicate that the monomer behaves as a dispersant that remains stable at the studied basic pHs despite they are close to the isoelectric point of alumina. Although the thermal stability of the composites is considerably affected by the pH of the reaction medium, its influence on the surface morphology is very small. Independently, of the synthetic conditions, the electrochemical properties were better for PEDOT/Al₂O₃ than for pure PEDOT, reflecting that alumina particles promote the charge mobility. The highest specific capacitance (SC; 141 F/g), which was 55% higher than that obtained for pure PEDOT, was achieved for the composite prepared at pH = 8.8 using a 4:1 monomer:alumina ratio. These conditions favor the participation of OH^– groups as secondary doping agents without degrading the polymer matrix and enhance the specific surface of the films, facilitating the ionic mobility. On the other hand, application of a multi‐step polymerization strategy has shown that interfaces originated by consecutive steps enhance the SC. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1131–1141     

On elementary equivalence in fuzzy predicate logics

Our work is a contribution to the model theory of fuzzy predicate logics. In this paper we characterize elementary equivalence between models of fuzzy predicate logic using elementary mappings. Refining the method of diagrams we give a solution to an open problem of Hájek and Cintula (J Symb Log 71(3):863–880, 2006, Conjectures 1 and 2). We investigate also the properties of elementary extensions in witnessed and quasi-witnessed theories, generalizing some results of Section 7 of Hájek and Cintula (J Symb Log 71(3):863–880, 2006) and of Section 4 of Cerami and Esteva (Arch Math Log 50(5/6):625–641, 2011) to non-exhaustive models.