Fourier transform-ion cyclotron resonance study of the gas-phase acidities of germane and methylgermane; Bond dissociation energy of germane

An accurate gas-phase acidity for germane (enthalpy scale, equivalent to the proton affinity of GeH₃ ^?), ΔH _acid ^o(GeH₄) = 1502.0 ± 5.1 kJ mol^?1, is obtained by constructing a consistent acidity ladder between GeH₄, and H₂S by using Fourier transform-ion cyclotron resonance spectrometry, and 0 and 298.15 K values for the first bond dissociation energy of GeH₄ are proposed: D₀ ^o(H₃Ge-H) = 352 ± 9 kJ mol^?1; D ^o(H₃Ge-H) = 358 ± 9 kJ mol^?1, respectively. These results are compared with experimental and theoretical data reported in the literature. Methylgermane was found to be a weaker acid than germane by approximately 35 kJ mol^?1: ΔH _acid ^o = 1536.6 kJ mol^?1.     

A novel biosensor for specific determination of hydrogen peroxide: catalase enzyme electrode based on dissolved oxygen probe

A biosensor for the specific determination of hydrogen peroxide was developed using catalase (EC 1.11.1.6) in combination with a dissolved oxygen probe. Catalase was immobilized with gelatin by means of glutaraldehyde and fixed on a pretreated teflon membrane served as enzyme electrode. The electrode response was maximum when 50 mM phosphate buffer was used at pH 7.0 and at 35 degrees C. The biosensor response depends linearly on hydrogen peroxide concentration between 1.0x10(-5) and 3.0x10(-3) M with a response time of 30 s. The sensor is stable for >3 months so in this period >400 assays can be performed.     

Practical Pd/C-mediated allylic substitution in water

Pd/C-mediated allylic substitution in water is described as an interesting alternative to classical homogeneous conditions. The reaction applied to allylic acetates showed a wide range of compatibility with various nitrogen, sulfur, oxygen, and carbon nucleophiles. Notably, the method features inexpensive reagents and a nontoxic solvent. Moreover, measurement of the palladium content in water by ICP-MS shows low palladium contamination (4 ppm) of the solvent, rendering this method safer for the environment compared to homogeneous conditions. The first asymmetric example of Pd/C-mediated allylic substitution is also disclosed.     

Synthesis and determination of pKa values of some new 3,4-disubstituted-4,5-dihydro-1H-1,2,4-triazol-5-one derivatives in non-aqueous solvents

3-Alkyl(Aryl)-4-amino-4,5-dihydro-1H-1,2,4-triazol-5-ones (2) reacted with 2-furoyl chloride and thiophene-2-carbonyl chloride to afford the corresponding 3- alkyl(aryl)-4-(2-furoylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (3) and 3-alkyl(aryl)- 4-(2-thienylcarbonylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (4), respectively. The new compounds synthesized were characterized by using IR, 1H-NMR, 13C-NMR and UV spectral data together with elemental analysis. In addition, to investigate the effects of solvents and molecular structure upon acidity, compounds 3 and 4 were titrated potentiometrically with tetrabutylammonium hydroxide in four non-aqueous solvents (isopropyl alcohol, tert-butyl alcohol, N,N-dimethylformamide and acetonitrile). The half-neutralization potential values and the corresponding pKa values were determined for all cases.     

Stability of tin etiopurpurin

Formulations of the tin etiopurpurin (SnET2) have been observed to undergo a spectral change on storage in dimethylformamide solution. This results in an alteration in the action spectrum, with enhanced photodynamic activity at lower wavelengths and decreased activity at 660 nm. On the basis of structural considerations, a reduced analog of SnET2 was prepared with an absorbance maximum at 640 nm. Formation of this product, termed SnET2H(2) relieves steric strain inherent in the parent molecule. Nuclear magnetic resonance, spectral and photodynamic data are consistent with the formation of SnET2H(2) during SnET2 storage. Slight modifications in the original synthesis are also reported, resulting in improved yields of intermediate products.     

Three-state 2',7'-difluorofluorescein excited-state proton transfer reactions in moderately acidic and very acidic media

2',7'-Difluorofluorescein (Oregon Green 488, OG488) is a novel fluorescein dye derivative which presents important advantages for improving the fluorimetric applications in the biomedical and biochemical sciences. In aqueous solution it displays four prototropic forms, namely cation (C), neutral (N), monoanion (M), and dianion (D). In previous works, we found (J. Phys. Chem. A 2005, 109, 734-747, 2840-2846) that OG488 undergoes excited-state proton transfer reactions, which may affect the results from applications using this dye. We established that the excited-state proton transfer (ESPT) reactions between neutral, monoanionic, and dianionic forms of OG488 are promoted by acetate buffer, and we characterized the ground and excited species involved. We also solved the kinetics of the prototropic reactions using global compartmental analysis. In the present paper, we extend our study on the ESPT reactions of OG488 to acidic media, in which only the three prototropic species cation, neutral, and monoanion coexist. We have solved the kinetics of the three-state ESPT reaction by means of global three-compartmental analysis of a fluorescence decay surface in moderately acidic media (pH between 1.1 and 3.0), recovering the kinetic and spectral parameters of this three-state system. This system is one of the most complex solved to date, due to the strong overlap of the absorption and emission spectra of the neutral and monoanionic forms of OG488. We also found that the cation behaves as "super" photoacid, showing a very high deprotonation rate constant (1.04 x 10(11) s(-1)) and an enhanced acidity. Therefore, we also carried out experiments at very high perchloric acid concentrations, dealing with some other effects which become noteworthy at these [H(+)]. The presence of xanthylium cation quenching due to "free" water molecules, and the reduction in the amount of water clusters acting as proton acceptors, are processes which alter notably the time course of the excited-species in this high [H(+)] range.     

C→N Migrations of the ethoxycarbonyl group in reactions of ortho-substituted aryl isocyanates with the 1,3-zwitterion derived from triisopropylphosphine and ethyl 2-cyanoacrylate

The reactions of meta—para-substituted aryl isocyanates with phosphorus-containing 1,3-zwitterions, which proceed with the CN migration of the CO₂Et group to form the corresponding carbamates, were extended to ortho-substituted aryl isocyanates. The influence of the steric and electronic effects of the ortho substituents in the aromatic rings of aryl isocyanates on the ease of this rearrangement is qualitatively considered.     

Standard ultraviolet daylight for nonextreme exposure conditions

The skin is exposed to ultraviolet radiation (UVR) from natural or artificial sources on a daily basis. The effects of chronic low dose exposure merit investigation, even when these effects are neither conspicuous nor clinically assessable. The purpose of the present study was to define a relative spectral UV irradiance that is representative of frequent nonextreme sun exposure conditions and therefore more appropriate for studies of the long-term and daily effects of solar UV on the skin. Solar spectral UV irradiance values were calculated for different dates and locations by using a radiative transfer model. The spectral irradiance values obtained when the solar elevation is lower than 45 degrees were averaged. An important feature is the dUVA (320-400 nm) to dUVB (290-320 nm) irradiance values ratio, which was found to be 27.3 for the overall average. When the months corresponding to extreme irradiance values (low or high) were excluded from the calculations, the dUVA to dUVB ratio ranged from 27.2 to 27.5. The mean spectral irradiance of the model presented here represents environmental UV exposure conditions and can be used both as a standard to investigate the biological effects of a nonextreme UVR and to assess the effectiveness of products for daily skin protection.     

Investigation into the valence electronic structure of norbornene using electron momentum spectroscopy, Green's function, and density functional theories

Results of a study of the valence electronic structure of norbornene (C(7)H(10)), up to binding energies of 30 eV, are reported. Experimental electron momentum spectroscopy (EMS) and theoretical Green's function and density functional theory approaches were utilized in this investigation. A stringent comparison between the electron momentum spectroscopy and theoretical orbital momentum distributions found that, among the tested models, the combination of the Becke-Perdew functional and a polarized valence basis set of triple-zeta quality provides the best representation of the electron momentum distributions for all 19 valence orbitals of norbornene. This experimentally validated model was then used to extract other molecular properties of norbornene (geometry, infrared spectrum). When these calculated properties are compared to corresponding results from independent measurements, reasonable agreement is typically found. Due to the improved energy resolution, EMS is now at a stage to very finely image the effective topology of molecular orbitals at varying distances from the molecular center, and the way the individual atomic components interact with each other, often in excellent agreement with theory. This will be demonstrated here. Green's Function calculations employing the third-order algebraic diagrammatic construction scheme indicate that the orbital picture of ionization breaks down at binding energies larger than about 22 eV. Despite this complication, they enable insights within 0.2 eV accuracy into the available ultraviolet emission and newly presented (e,2e) ionization spectra. Finally, limitations inherent to calculations of momentum distributions based on Kohn-Sham orbitals and employing the vertical depiction of ionization processes are emphasized, in a formal discussion of EMS cross sections employing Dyson orbitals.     

Flame atomic absorption spectrometric determination of silver after preconcentration on Amberlite XAD-16 resin from thiocyanate solution

A method of silver preconcentration by using a column containing Amberlite XAD-16 resin and this future determination by a flame AAS after elution is proposed. The effect of the factors such as pH, the nature of complexing agent, sample volume, flow rate, the type and concentration of elution solution on the preconcentration efficiency have been investigated. The influence of some matrix elements on the recovery of silver were also examined. It was found, that the quantitative recovery of thiocyanate complex of silver was obtained from nitric acid solution (pH 2) as 99.20+/-0.07% at the 95% confidence level. A preconcentration factor up to 75 could be obtained. The detection limit of silver was 0.047 mg l(-1). The adsorption of silver onto Amberlite XAD-16 can be formally described by a Langmuir equation with maximum adsorption capacity 4.66 mg g(-1) (0.043 mmol g(-1)). The proposed method was applied to determination of silver in standard alloy with relative error 6.25%.