Bioanalysis of (E)-5-(2-bromovinyl)-2'-deoxyuridine

(E)-5-(2-Bromovinyl)-2'-deoxyuridine is an antiviral drug that is experimentally used for modulation of the antitumour effect of fluoropyrimidines, such as ftorafur and 5-fluorouracil. The isolation of the analyte, in the presence of 5-fluorouracil, from the matrix is performed either by means of a simple protein precipitation (plasma) or by means of a liquid-liquid extraction with ethyl acetate (urine). Following pretreatment, the analyte is analysed by reversed-phase chromatography and quantified by absorbance detection at 307 nm. The minimum detectable concentration in plasma and urine samples is ca. 6 ng/ml. The recovery after deproteination of plasma samples is 75%, while after liquid-liquid extraction of urine the recovery amounts 92%. The degree of protein binding of the analyte, measured by ultrafiltration, is found to be 97%. These data allow the bioanalysis of (E)-5-(2-bromovinyl)-2'-deoxyuridine for pharmacokinetic studies.     

Ferrocene incorporating host-guest dyads with electrochemically controlled three-pole hydrogen bonding properties

We describe the electrochemically controlled hydrogen bonding interactions between the isobutyl flavin/2,6-diferrocenylamidopyridine (2·5) and 9,10-phenanthrenequinone/1-ferrocenyl-3-hexylurea (4·6) dyads. Cyclic and square wave voltammetry studies have shown that the binding efficiencies between these moieties can be electrochemically actuated in non-polar (CH₂Cl₂ for 2·5) or polar (DMF for 4·6) organic solvents between three distinct states.     

Determination of trace levels of mercury in water samples based on room temperature phosphorescence energy transfer

A novel method has been developed for the sensitive determination of mercury in aqueous media by room temperature phosphorescence (RTP). The measurement principle is based on the energy transfer (ET) from a phosphor molecule (acting as a donor) to a Hg-sensitive dye (acceptor). To our acknowledgment this is the first RTP method for mercury measurement developed so far. α-Bromonaphthalene (BrN) was selected as the phosphorescent donor molecule (BrN can produce significant RTP emission in aqueous media in a β-cyclodextrin rigid microenvironment without deoxygenation).The absorption spectrum of the complex formed between mercury and the dithizone dye possesses a desirable spectral overlap with the RTP emission spectrum of the donor (BrN), giving rise to a nonradiative ET from the phosphor molecules to the mercury complex. An increase in the concentration of Hg(II) causes an increase on the concentration of the dithizone complex (acceptor) with the subsequent increase of the absorbance and, therefore, resulting in a decrease of the RTP emission. Both, RTP intensities and triplet lifetimes of the BrN decreased with increases on the Hg(II) concentration.Possible interferences present in natural waters, including different cations and anions, which could affect the analytical response, were evaluated and the analytical performance characteristics investigated. The use of phosphorescence measurements (low background noise signals) resulted in an improvement on the sensitivity of the Hg(II) detection higher than five times as compared to the molecular absorption spectrophotometric method for Hg(II) detection based on dithizone as Hg-indicator. A detection limit (D.L.) of 14 ng ml⁻¹ of Hg(II) was obtained by RTP with a precision of ±4.8% for five replicates of 300 ng ml⁻¹ of Hg(II). The usefulness of the method was successfully evaluated by the determination of Hg(II) in spiked natural water samples.     

Comparison of the phytoestrogen trans-resveratrol (3,4',5-trihydroxystilbene) structures from x-ray diffraction and solution NMR

The NMR-derived solution structure of trans-3,4',5-trihydroxystilbene (resveratrol) was compared with two recent literature crystal x-ray structures, resveratrol in complex with human transthyretin (TTR-RES) from 1DVS.pdb and resveratrol bound to chalcone synthase (CHS-RES) from 1CGZ.pdb. 1H and 13C NMR spectra of resveratrol were acquired in DMSO-d6. Assignments were obtained from an analysis of DQF-COSY, TOCSY, DEPT, HMQC/HSQC, HMBC and INADEQUATE NMR spectra. Past 1H and 13C NMR literature assignments are corrected. The dihedral angle 2-1-1'-2' provides an indication of the relative spatial orientation of the two phenolic rings. Values of 1.62, - 54.10 and 12.6 +/- 1.1 degrees were found for the 1DVS.pdb, 1CGZ.pdb and NMR resveratrol structures, respectively. The 1DVS.pdb resveratrol structure is 'flat' with the two phenolic rings along the same plane. The 1CGZ.pdb structure has these two rings almost orthogonal to each other, and the NMR structure has these two rings much closer to being along the same plane. The angles 1-alpha--alpha' and 1'-alpha'--alpha are along the same trace and of similar magnitude for the 1CGZ.pdb and NMR resveratrol structures. For the 1DVS.pdb resveratrol structure, these angles are about 7-10 degrees greater, with alpha and alpha' being 180 degrees out-of-phase from the other two structures. The alpha rings did not overlap, with the NMR result representing a 'median model' of the two x-ray structures.     

Phase transitions in the tantalum-hydrogen system observed by PAC

The perturbation felt by¹⁸¹Hf probes in a¹⁸¹HfTa lattice loaded with 30 at% hydrogen was observed by PAC as a function of temperature. Three different interactions were identified: 1) Ν_Q1=433 (6) MHz, η=0.45 2) Ν_Q2=142 (9) MHz, η=0.9, and 3) Ν_Q?0, σ=4–14 Μ^?1 which are attributed to the Β^?, ε^? and α-phase in TaH system, respectively.     

Analysis of anthracycline antitumour drugs in tissues and body fluids using liquid chromatography

Anthracyclines, with doxorubicin as the major representative, are amongst the most important chemotherapeutic agents used in cancer therapy. In order to reduce the severe side effects associated with their use, and to increase therapeutic efficacy, analogue development still continues, and analytical requirements change concomitantly. The available methods for bioanalysis of anthracyclines are summarized, with emphasis on high-performance liquid chromatography. Attention is paid to sample pretreatment, the possibilities of liquid—liquid and solid-phase extraction, and the chromatographic behaviour of the anthracyclines.     

New dimension in nano-imaging: breaking through the diffraction limit with scanning near-field optical microscopy

In recent years scanning near-field optical microscopy (SNOM) has developed into a powerful surface analytical technique for observing specimens with lateral resolution equal to or even better than 100 nm. A large number of applications, from material science to biology, have been reported. In this paper, two different kinds of near-field optical microscopy, aperture and scattering-type SNOM, are reviewed together with recent studies in surface analysis and biology. Here, near-field optical techniques are discussed in comparison with related methods, such as scanning probe and standard optical microscopy, with respect to their specific advantages and fields of application.     

Dynamics and lithium binding energies of polyelectrolytes based on functionalized poly(para-phenylene terephthalamide)

Polyelectrolyte materials are an interesting class of electrolytes for use in fuel cell and battery applications. Poly(para-phenylene terephthalamide) (PPTA, Kevlar) is a liquid crystalline polymer that, when sulfonated, is a polyelectrolyte that exhibits moderate ion conductivity at elevated temperatures. In this work, quasi-elastic neutron scattering (QENS) experiments were performed to gain insight into the effect of the presence of lithium counterions on the chain dynamics in the material. It was found that the addition of lithium ions decreases the dynamics of the chains. Additionally, the binding of lithium ions to the sulfonic acids groups was investigated by density functional theory (DFT) calculations. It was found that the local surroundings of the sulfonic acid group have very little effect on the lithium-ion binding energy. Binding energies for a variety of different systems were all calculated to be around 150 kcal/mol. The DFT calculations also show the existence of a structure in which a single lithium ion interacts with two sulfonic acid moieties on different chains. The formation of such "electrostatic cross-links" is believed to be the source of the increased tendency to aggregate and the reduced dynamics in the presence of lithium ions.     

Capture of toxic gases in MOFs: SO2, H2S,NH3 and NOx

MOFs are promising candidates for the capture of toxic gases since their adsorption properties can be tuned as a function of the topology and chemical composition of the pores. Although the main drawback of MOFs is their vulnerability to these highly corrosive gases which can compromise their chemical stability, remarkable examples have demonstrated high chemical stability to SO₂, H₂S, NH₃ and NO_x. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases. Thus, the interactions of such functional groups (coordinatively unsaturated metal sites, μ-OH groups, defective sites and halogen groups) with these toxic molecules, not only determines the capture properties of MOFs, but also can provide a guideline for the desigh of new multi-functionalised MOF materials. Thus, this perspective aims to provide valuable information on the significant progress on this environmental-remediation field, which could inspire more investigators to provide more and novel research on such challenging task.

MOFs are promising candidates for the capture of toxic gases such as SO₂, H₂S, NH₃ and NOx. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases.