Minimal Surfaces with an Elastic Boundary

LetD:= { C ³ (

Single laboratory validation of a method for determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by high-performance liquid chromatography with FMOC-Su derivatization

Single laboratory validation of a method for determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by with high-performance liquid chromatography FMOC-Su derivatization. Tests with 2 blank matrixes containing SAMe, vitamin C, citric acid, chondroitin sulfates, methylsulfonylmethane, lemon juice concentrate, and other potential interferents showed the method to be selective and specific. Eight calibration curves prepared over 7 working days indicated excellent reproducibility with the linear range at least over 2.0-150 microg/mL, and determination coefficients >0.9999. Average spike recovery from the blank matrix (n = 8 over 2 days) was 93.5, 99.4, and 100.4% at respective spike levels of 15, 100, and 150%, and from the sample matrix containing glucosamine (n = 3) was 99.9 and 102.8% at respective levels of 10 and 40%, with relative standard deviations <0.9%. The method was also applied to 12 various glucosamine finished products and raw materials. The stability tests confirmed that glucosamine-FMOC-Su derivative once formed is stable at room temperature for at least 5 days. Limit of quantitation was 1 microg/mL and limit of detection was 0.3 microg/mL. The method is ready to proceed for the collaborative study.     

Within-Plant Variation in Rosmarinus officinalis L. Terpenes and Phenols and Their Antimicrobial Activity against the Rosemary Phytopathogens Alternaria alternata and Pseudomonas viridiflava

This study investigated within-plant variability of the main bioactive compounds in rosemary (Rosmarinus officinalis L.). Volatile terpenes, including the enantiomeric distribution of monoterpenes, and phenols were analyzed in young and mature foliar, cortical and xylem tissues. In addition, antimicrobial activity of rosmarinic acid and selected terpenes was evaluated against two rosemary pathogens, Alternaria alternata and Pseudomonas viridiflava. Data showed that total concentration and relative contents of terpenes changed in relation to tissue source and age. Their highest total concentration was observed in the young leaves, followed by mature leaves, cortical and xylem tissues. Rosmarinic acid and carnosic acid contents did not show significant differences between leaf tissues of different ages, while young and mature samples showed variations in the content of four flavonoids. These results are useful for a more targeted harvesting of rosemary plants, in order to produce high-quality essential oils and phenolic extracts. Microbial tests showed that several terpenes and rosmarinic acid significantly inhibited the growth of typical rosemary pathogens. Overall, results on antimicrobial activity suggest the potential application of these natural compounds as biochemical markers in breeding programs aimed to select new chemotypes less susceptible to pathogen attacks, and as eco-friendly chemical alternatives to synthetic pesticides.     

Identification of novel microsatellite markers <1 Mb from the HBB gene and development of a single‐tube pentadecaplex PCR panel of highly polymorphic markers for preimplantation genetic diagnosis of beta‐thalassemia

Beta (β)‐thalassemia is one of the most common monogenic diseases worldwide. Affected pregnancies can be avoided through preimplantation genetic diagnosis (PGD), which commonly involves customized assays to detect the different combinations of β‐globin (HBB) gene mutations present in couples, in conjunction with linkage analysis of flanking microsatellite markers. Currently, the limited number of reported closely linked markers hampers their utility in indirect linkage‐based PGD for this disorder. To increase the available markers closely flanking the HBB gene, an in silico search was performed to identify all markers within 1 Mb flanking the HBB gene. Fifteen markers with potentially high polymorphism information content (PIC) and heterozygosity values were selected and optimized into a single‐tube pentadecaplex PCR panel. Allele frequencies and polymorphism and heterozygosity indices of each marker were assessed in five populations. A total of 238 alleles were observed from the 15 markers. PIC was >0.7 for all markers, with expected heterozygosity and observed heterozygosity values ranging from 0.74 to 0.90 and 0.72 to 0.88, respectively. Greater than 99% of individuals were heterozygous for at least seven markers, with at least two heterozygous markers on either side of the HBB gene. The pentadecaplex marker assay also performed reliably on single cells either directly or after whole genome amplification, thus validating its use in standalone linkage‐based β‐thalassemia PGD or in conjunction with HBB mutation detection.     

A 3-D dielectrophoretic filter chip

The paper presents a 3-D filter chip employing both mechanical and dielectrophoretic (DEP) filtration, and its corresponding microfabrication techniques. The device structure is similar to a classical capacitor: two planar electrodes, made from a stainless steel mesh, and bonded on both sides of a glass frame filled with round silica beads. The solution with the suspension of particles flows through both the mesh-electrodes and silica beads filter. The top stainless steel mesh (with openings of 60 mum and wires of 30 mum-thickness) provides the first stage of filtration based on mechanical trapping. A second level of filtration is based on DEP by using the nonuniformities of the electric field generated in the capacitor due to the nonuniformities of the dielectric medium. The filter can work also with DC and AC electric fields. The device was tested with yeast cells (Saccharomyces cerevisae) and achieved a maximal trapping efficiency of 75% at an applied AC voltage of 200 V and a flow rate of 0.1 mL/min, from an initial concentration of cells of 5 x 10(5) cells/mL. When the applied frequency was varieted in the range between 20 and 200 kHz, a minimal value of capture efficiency (3%) was notticed at 50 kHz, when yeast cells exhibit negative DEP and the cells are repelled in the space between the beads.     

Liquid hot water pretreatment of olive tree pruning residues

Olive tree pruning generates an abundant, renewable lignocellulose residue, which is usually burnt on fields to prevent propagation of vegetal diseases, causing economic costs and environmental concerns. As a first step in an alternative use to produce fuel ethanol, this work is aimed to study the pretreatment of olive tree pruning residues by liquid hot water. Pretreatment was carried out at seven temperature levels in the range 170-230 degrees C for 10 or 60 min. Sugar recoveries in both solid and liquid fractions resulting from pretreatment as well as enzymatic hydrolysis yield of the solid were used to evaluate pretreatment performance. Results show that the enzyme accessibility of cellulose in the pretreated solid fraction increased with pretreatment time and temperature, although sugar degradation in the liquid fraction was concomitantly higher.     

Facile chemical approach to ZnO submicrometer particles with controllable morphologies

We have developed a simple wet-chemistry approach to fabricating ZnO submicrometer particles with unique morphologies including rings, bowls, hemispheres, and disks. The size and morphology of the particles can be conveniently tailored by varying the concentrations of the zinc precursor. The reaction temperature, pH, and concentration of ammonia are also found to play critical roles in directing the formation of these particle morphologies. These submicrometer particles exhibit strong white-light emission upon UV excitation as a result of the presence of surface defect states resulting from the fabrication method and synthesis conditions.     

Polysaccharides Release in a Laboratory-Scale Batch Hydrothermal Pretreatment of Wheat Straw under Rigorous Isothermal Operation

Hydrothermal pretreatment (HP) is an eco-friendly process for deconstructing lignocellulosic biomass (LCB) that plays a key role in ensuring the profitability of producing biofuels or bioproducts in a biorefinery. At the laboratory scale, HP is usually carried out under non-isothermal regimes with poor temperature control. In contrast, HP is usually carried out under isothermal conditions at the commercial scale. Consequently, significant discrepancies in the values of polysaccharide releases are found in the literature. Therefore, laboratory-scale HP data are not trustworthy if scale-up or retrofitting of HP at larger scales is required. This contribution presents the results of laboratory-scale batch HP for wheat straw in terms of xylan and glucan release that were obtained with rigorous temperature control under isothermal conditions during the reaction stage. The heating and cooling stages were carried out with fast rates (43 and −40 °C/min, respectively), minimizing non-isothermal reaction periods. Therefore, the polysaccharide release results can be associated exclusively with the isothermic reaction stage and can be considered as a reliable source of information for HP at commercial scales. The highest amount of xylan release was 4.8 g/L or 43% obtained at 180 °C and 20 min, while the glucan release exhibited a maximum of 1.2 g/L or 5.5%. at 160 °C/180 °C and 30 min.     

Possibility of controlled ejection of ferrofluid grains from a magnetically ordered ferrofluid using high frequency non-linear acoustic pulses – a particle dynamical study

We consider a model dilute ferrofluid that is subjected to a strong, homogeneous magnetic field directed perpendicular to the surface of the ferrofluid, such that there is a chain formation in the direction perpendicular to the surface of the liquid. We study the propagation of impulses generated at high-frequency across finite times through the ferrofluid chains. Our numerical analysis shows that a very high-frequency sequence of non-linear acoustic pulses of appropriate magnitudes, initiated at the base of the container, can lead to the ejection of desired number of ferrofluid grains through the liquid–air interface. The proposed mechanism, if successfully realized in the laboratory, could help design a nozzle-free, ultrafast, ink-jet printer of unparalleled resolution.