Preparative isolation and purification of atractylon and atractylenolide III from the Chinese medicinal plant atractylodes macrocephala by high-speed counter-current chromatography

The medicinal plant Atractylodes macrocephala (Baizhu in Chinese) has been widely used in traditional Chinese medicine for energy and stomach complaints, treatment of dyspepsia and anorexia, anti-inflammation, anticancer and for increasing assimilation. A high-speed counter-current chromatography (HSCCC) method was developed for the preparative separation and purification of two main bioactive components, namely, atractylon and atractylenolide III from A. macrocephala by using light petroleum (60-90 degrees C)-ethyl acetate-ethanol-water (4:1:4:1 v/v) as the two-phase solvent system in dual-mode elution. Compared with the separation using the normal-mode elution, the dual-mode HSCCC can be achieved with shorter elution time. Atractylenolide III (32.1 mg) at 99.0% purity and 319.6 mg atractylon at 97.8% purity could be obtained from 1000 mg crude sample in a single run. The recoveries of atractylenolide III and atractylon were 95.4 and 92.6%, respectively.     

Highly efficient heterogeneous procedure for the synthesis of fructone fragrancy

A novel heterogeneous strong acid catalyst was synthesized through the copolymerization of p-toluenesulfonic acid and paraformaldehyde and utilized for the synthesis of fructone. The results showed that the catalyst was very efficient for the reaction with the yield over 95%. The advantages of extremely high density of acidity, high thermal and chemical stability, low cost for the simple synthetic procedure, and reusability made the catalyst one of the best choices for the reaction.     

Investigations of the optical and EPR spectra for VO2+ in LiKSO4 crystals

The optical spectra and EPR spectra (characterized by the spin-Hamiltonian parameters g(//), g(perpendicular), A(//) and A(perpendicular)) for the molecular ion VO2+ in LiKSO4 crystals are calculated from two microscopic theory methods, one of which is the complete diagonalization (of energy matrix) method (CDM) and the other is the perturbation theory method (PTM). The calculated three optical absorption bands and four spin-Hamiltonian parameters from the two methods are not only close to each other, but also in reasonable agreement with the experimental values. It appears that both theoretical methods are effective in the explanation of optical and EPR spectra for 3d1 ions in crystals. The negative signs of hyperfine structure constants A(//) and A(perpendicular) for VO2+ in LiKSO4 crystals are also suggested from the calculations.     

Solid-state electrochemiluminescence of a novel iridium(Ⅲ) complex

The sofid-state ECL behavior of a water-insoluble bis-cyclometalated (pq)2Ir(N-phMA) complex is presented, in which pq is a 2-phenylquinoline anion and N-phMA is N-phenyl methacrylamide, a monoanionic bidentate ligand. The MWNTs/(pq)2Ir(N-phMA) film, MWNTs/Ru(bpy)32+ film and (pq)2Ir(N-phMA) directly modified glassy carbon electrode were fabricated; only the MWNTs/(pq)2Ir(N-phMA) film can produce steady ECL in the presence of tri-n-propylamine as a coreactant.     

PREPARATION AND CELL COMPATIBILITY OF FUNCTIONALIZED BIODEGRADABLE POLY(DL-LACTIDE-CO-RS-Β-MALIC ACID)

In order to create a functionalized biodegradable polymer for vascular tissue engineering application,poly(DL- lactide-co-RS-β-malic acid)(PDLLMAc)was synthesized.PDLLMAc was obtained after hydrogenolysis of poly(DL- lactide-co-RS-β-benzyl malolactonate)(PDLLMA),which was from the ring-opening polymerization of DL-lactide(DLLA) and RS-β-benzyl malolactonate(MA)using stannous octoate as catalyst.The copolymers were characterized by ~1H-NMR, FTIR,GPC and DSC.The tensile strength and water uptake of the cop...     

Block copolymer micelle shuttles with tunable transfer temperatures between ionic liquids and aqueous solutions

Four poly((1,2-butadiene)- block-ethylene oxide) (PB-PEO) diblock copolymers were shown to self-assemble into micelles with PB cores and PEO coronas (including spheres, cylinders, and vesicles) in the ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). All four systems exhibited the "micelle shuttle" (He, Y.; Lodge, T. P. J. Am. Chem. Soc. 2006, 128, 12666-12667), whereby PB-PEO micelles transferred, reversibly and with preservation of micelle structure, from an aqueous phase at room temperature to a hydrophobic ionic liquid at high temperature. The micelle size (both mean and distribution) depends on whether it was initially dissolved in water or in the ionic liquid, but the initial micelle structures in the ionic liquid were shown by dynamic light scattering to be preserved during the transfer and persist essentially unchanged for months in both the ionic liquid and water. The transfer was shown to be driven by the deteriorating solvent quality of water for PEO at high temperature, while the ionic liquid remains a good solvent. The transfer temperature could be tuned by adding ionic or nonionic additives to the aqueous phase to change the solvent quality of water for PEO, and by using ionic liquids with different polarity.     

Starburst triarylamine based dyes for efficient dye-sensitized solar cells

We report here on the synthesis and photophysical/electrochemical properties of a series of novel starburst triarylamine-based organic dyes (S1, S2, S3, and S4) as well as their application in dye-sensitized nanocrystalline TiO2 solar cells (DSSCs). For the four designed dyes, the starburst triarylamine group and the cyanoacetic acid take the role of electron donor and electron acceptor, respectively. It was found that the introduction of starburst triarylamine group to form the D-D-pi-A configuration brought about superior performance over the simple D-pi-A configuration, in terms of bathochromically extended absorption spectra, enhanced molar extinction coefficients and better thermo-stability. Moreover, the HOMO and LUMO energy levels tuning can be conveniently accomplished by alternating the donor moiety, which was confirmed by electrochemical measurements and theoretical calculations. The DSSCs based on the dye S4 showed the best photovoltaic performance: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 85%, a short-circuit photocurrent density (J(sc)) of 13.8 mA cm(-2), an open-circuit photovoltage (V(oc)) of 0.63 V, and a fill factor (ff) of 0.69, corresponding to an overall conversion efficiency of 6.02% under 100 mW cm(-2) irradiation. This work suggests that the dyes based on starburst triphenylamine donor are promising candidates for improvement of the performance of the DSSCs.     

Electrochemical origin of voltage-controlled molecular conductance switching

We have studied electron transport in bipyridyl-dinitro oligophenylene-ethynelene dithiol (BPDN) molecules both in an inert environment and in aqueous electrolyte under potential control, using scanning tunneling microscopy. Current-voltage (IV) data obtained in an inert environment were similar to previously reported results showing conductance switching near 1.6 V. Similar measurements taken in electrolyte under potential control showed a linear dependence of the bias for switching on the electrochemical potential. Extrapolation of the potentials to zero switching bias coincided with the potentials of redox processes on these molecules. Thus switching is caused by a change in the oxidation state of the molecules.     

Microwave-assisted growth and characterization of water-dispersed CdTe/CdS core-shell nanocrystals with high photoluminescence

A novel microwave-assisted method of growth of high-quality CdTe/CdS core-shell nanocrystals in the aqueous phase is presented in this paper. The photoluminescence quantum yield (PLQY) is greatly enhanced by epitaxial growth of the CdS shell. Under optimum conditions, the PLQY of as-prepared nanocrystals reaches as high as 75% without any post-treatment. Furthermore, these investigations demonstrate that microwave irradiation is tremendously useful for fast epitaxial growth of nanocrystals due to its special characteristics. As a result, the microwave synthesis is sufficiently time-economizing (only five minutes are required) to obtain optimum amounts of CdTe/CdS core-shell nanocrystals in comparison to the conventional illumination method (several days are required). Therefore, this current research not only provides a rapid microwave synthesis for producing highly fluorescent CdTe/CdS core-shell nanocrystals, but also it presents some advantages of the microwave synthesis in comparison to the illumination method.     

Young's moduli of surface-bound liposomes by atomic force microscopy force measurements

Mechanical properties of layers of intact liposomes attached by specific interactions on solid surfaces were studied by atomic force microscopy (AFM) force measurements. Force-distance measurements using colloidal probe tips were obtained over liposome layers and used to calculate Young's moduli by using the Hertz contact theory. A classical Hertz model and a modified Hertz one have been used to extract Young's moduli from AFM force curves. The modified model, proposed by Dimitriadis, is correcting for the finite sample thickness since Hertz's classical model is assuming that the sample is infinitely thick. Values for Young's moduli of 40 and 8 kPa have been obtained using the Hertz model for one and three layers of intact liposomes, respectively. Young's moduli of approximately 3 kPa have been obtained using the corrected Hertz model for both one and three layers of surface-bound liposomes. Compression work performed by the colloidal probe to compress these liposome layers has also been calculated.