Palladium‐Catalyzed Cross‐Dehydrogenative Functionalization of C(sp2)H Bonds

The catalytic cross‐dehydrogenative coupling (CDC) reaction has received intense attention in recent years. The attractive feature of this coupling process is the formation of a C? C bond from two C? H moieties under oxidative conditions. In this Focus Review, recent advances in the palladium‐catalyzed CDC reactions of C(sp²)? H bond are summarized, with a focus on the period from 2011 to early 2013.     

Aluminum fluoride-18-labelled indocyanine green as a potential PET imaging agent for hepatic function reserve

Journal of Radioanalytical and Nuclear Chemistry - This study evaluated the potential of Al18F-labelled restrained complexing agent (RESCA)-ICG to assess hepatic function reserve on PET/CT imaging....     

基于微流控热泳的生物传感技术※

复杂生命体系中关键分子及微纳生物粒子的高灵敏、高特异检测, 对理解多层次多尺度生物学过程、阐明疾病发生发展机制和探索新型生物标志物等具有重要意义. 微流控生物传感器整合了微流控技术和生物传感技术的诸多优势, 在微量生物样本精准测量方面取得了显著进展. 近年来, 微流控热泳生物传感技术(Thermomicrofluidic biosensing)利用物质在局域温度梯度场中的热泳定向迁移现象, 并结合均相生物传感及信号放大新策略, 实现了复杂样本中生物分子及微纳生物粒子的快速、高灵敏、原位检测. 重点阐述了以热泳为核心的微流控传感技术, 包括微量热泳、热泳-对流耦合、热泳-扩散泳耦合以及热泳-电泳耦合等方法, 总结了不同传感方法的原理、特点及其在生物分子(蛋白、核酸等)与微纳生物粒子(细胞外囊泡、病毒、细胞等)检测中的应用, 并探讨了微流控热泳技术在生物医学检测领域中面临的挑战与未来发展方向.     

电容去离子除氯电极的构建及其脱盐性能研究进展

电容去离子技术(Capacitive deionization,CDI)是一种新兴的脱盐技术,通过在电极两端施加较低的外加电场除去水中的带电离子和分子,由于其较低的能耗和可持续性而备受关注。基于储能电池领域近年来的迅猛发展,CDI电极材料实现了从以双电层作用机理为代表的碳材料到法拉第电极材料的跨越,使得脱盐性能有了大幅度提升。Na⁺的去除与Cl^-的去除同等重要,然而,CDI中针对氯离子高效去除的电极材料研究关注较少。本文从CDI装置的构型演变发展出发,系统地归纳与梳理了CDI中关于脱氯电极材料的分类,对比了不同类型脱氯电极材料的特点,并总结了Cl^-去除的机理,分别为基于双电层的电吸附、转化反应、离子插层和氧化还原反应。本文是首篇关于CDI阳极材料的进展综述和展望,为CDI除氯电极的后续研究提供理论基础和研究思路。     

石墨烯玻璃透明薄膜加热特性

Graphene has become a research focus in recent years owing to its excellent characteristics, and glass is a commonly used material with high transparency and low cost. Graphene glass combines the excellent properties of both graphene and glass; graphene glass has not only high thermal conductivity, high electrical conductivity, and good surface hydrophobicity but also exhibits superior electrothermal conversion and wide-spectrum high-light-transmittance characteristics. Therefore, the study of graphene glass films is of theoretical value and practical significance. In this study, a high-purity glass-based (JGS1 quartz glass) multilayer graphene film was developed based on an atmospheric-pressure chemical vapor deposition (APCVD) method, and its electrical characteristics, light transmittance, and electrical heating characteristics were experimentally investigated in detail. The results show that graphene glass with different surface resistance values obtained through direct growth on a high-purity quartz glass substrate using the APCVD method, not only has excellent uniformity and quality, but also has considerably flat and high transmittance across the entire visible light region and exhibits excellent heating performance and fast response time. For graphene glass with a surface resistance of 1500 Ω·sq^-1, the light transmittance can reach 74%, and the saturation temperature can rise to 185 ℃ by applying a bias voltage of 40 V. In addition, when the resistance value of the graphene glass is 420 Ω·sq^-1, the graphene glass reaches a high saturation temperature of 325 ℃ in 40 s, and the corresponding heating rate can exceed 18 ℃·s^-1, achieving a significantly higher heating rate than other heating films at the same voltage. Compared with the polyethylene-terephthalate- (PET-) based and silicon-based graphene films obtained by the transfer, graphene glass has a higher saturation temperature, shorter thermal response time, and faster heating rate. Furthermore, graphene glass exhibits better heating cycle stability and longer-term heating stability at a constant voltage. In addition, an experiment using the graphene glass to thermally tune the wavelength of a vertical-cavity surface-emitting laser was conducted and gave good results. The position of the laser peak controlled by the graphene glass was red-shifted by 1.78 nm by applying a voltage of 20 V, and the wavelength tuning efficiency reached 0.059 nm·℃^-1. Compared with PET-based and silicon-based graphene films, the actual electrical heating capacity of graphene glass increased by 195%. These experimental findings demonstrate that graphene glass transparent films with excellent electric heating characteristics can be used in various transparent electric heating fields and have relatively wide application prospects.     

铜掺杂钙铝水滑石催化氧化异丙苯制备异丙苯过氧化氢

采用共沉淀法制备了铜掺杂钙铝水滑石Ca₄Cu _x Al-LDHs（x=0,0.1,0.3,0.5,0.8,1.0）,并对其催化异丙苯液相氧化制备异丙苯过氧化氢的活性进行了研究。采用X射线衍射、傅里叶红外光谱、扫描电子显微镜和热分析等手段对Ca₄Cu _x Al-LDHs进行了表征,制备的Ca₄Cu _x Al-LDHs保留了水滑石的片层状结构,铜的掺杂使孔径变小,比表面积增大。当进料比（催化剂/异丙苯）为7.5 mg/mL,反应温度85 ℃,氧气流速为15 mL/min,反应时间7 h,异丙苯的转化率为34.5%,异丙苯过氧化氢的选择性为86.9%,催化剂循环使用5次后,异丙苯的转化率为31.2%,异丙苯过氧化氢的选择性为83.3%。研究为异丙苯过氧化氢开发了新的催化体系。     

铁基分子筛活性位点的制备控制及对NH3-SCR活性的影响

采用离子交换法,通过不同制备条件制备Fe-beta分子筛,并探讨不同制备条件对催化剂活性位点和NH3-SCR活性的影响。通过UV-Vis分析,将不同位置的吸收峰归属于不同的铁活性位点,300nm以下的高能谱区可以归属于孤立的Fe3+位点,300nm-400nm间归属于低聚的FexOy簇,而400nm以上为Fe2O3大颗粒聚合物。对比不同催化剂的SCR活性发现,孤立的Fe3+和低聚态的Fe3+是主要的活性位点,这两种物种的所占比例高低直接影响了催化剂的活性。而大尺度的Fe2O3为非活性位点,因尽量控制并降低其所占比例。另外低聚态的Fe3+所占比例越高,N2O的生成量越高,N2的选择性越差。因此,在制备过程中,除了控制大尺度的Fe2O3的含量,同时要尽量降低低聚态的Fe3+的含量,以增加N2的选择性。采用离子交换法制备Fe-beta催化剂,pH、交换温度、前驱体种类、硅铝比、煅烧条件等制备条件会对Fe-beta的活性位点造成影响,从而导致活性差异。根据实际应用需求,调控制备条件,可有效控制活性物种的分布,制备具有高效NH3-SCR活性的铁基分子筛催化剂。     

Revealing the Reaction and Fading Mechanism of FeSe2 Cathodes for Rechargeable Magnesium Batteries

Rechargeable Mg batteries (RMBs) are advantageous large-scale energy-storage devices because of the high abundance and high safety, but exploring high-performance cathodes remains the largest difficulty for their development. Compared with oxides and sulfides, selenides show better Mg-storage performance because the weaker interaction with the Mg²⁺ cation favors fast kinetics. Herein, nanorod-like FeSe₂ was synthesized and investigated as a cathode for RMBs. Compared with microspheres and microparticles, nanorods exhibit higher capacity and better rate capability with a smaller particle size. The FeSe₂ nanorods show a high capacity of 191 mAh g⁻¹ at 50 mA g⁻¹ and a good rate performance of 39 mAh g⁻¹ at 1000 mA g⁻¹. Ex situ characterizations demonstrate the Mg²⁺ intercalation mechanism for FeSe₂, and a slight conversion reaction occurs on the surface of the particles. The capacity fading is mainly because of the dissolution of Fe²⁺, which is caused by the reaction between Fe²⁺ and Cl⁻ of the electrolyte during the charge process on the surface of the particles. The surface of FeSe₂ is mainly selenium after long cycling, which may also dissolve in the electrolyte during cycling. The present work develops a new type of Mg²⁺ intercalation cathode for RMBs. More importantly, the fading mechanism revealed herein has considered the specificity of Mg battery electrolyte and would assist a better understanding of selenide cathodes for RMBs.     

Extraction of parabens by melamine sponge with determination by high-performance liquid chromatography

In the present study, we propose a novel method for the extraction of parabens in personal care products. A new, simple adsorptive material was obtained by combining metal-organic frameworks and melamine sponges using the adhesive property of polyvinylidene fluoride. This new material, metal-organic frameworks/melamine sponges, was found to be particularly suitable for solid-phase extraction. The structural characteristics of metal-organic frameworks/melamine sponges were first analyzed by scanning electron microscopy. Subsequently, solid-phase extraction was performed on sample solutions, and the extracted substances were then analyzed by high-performance liquid chromatography. Following optimization of important experimental conditions, excellent recovery rates were obtained. Our novel method was then applied to the extraction of four parabens (methylparahydroxybenzoates, ethylparahydroxybenzoates, propylparahydroxybenzoates, and butylparahydroxybenzoates) from real samples. The results yielded limits of detection of 0.26–0.41 ng/mL. The inter- and intra-day recoveries were 104.0–109.7% and 91.2–98.1%, respectively (relative standard deviation, <13.8%).     

基于生物炭的高级氧化技术降解水中有机污染物

碳基材料催化剂因具有良好的催化性能,同时可避免金属催化剂的重金属沥出造成的二次污染问题,常被应用于高级氧化领域。其中,以废弃生物质为原材料热解产生的生物炭,不仅具有催化潜力,还具有低成本和绿色环保等优势,被广泛用于活化过氧化氢、过一硫酸氢盐和过二硫酸盐等过氧化物降解水中有机污染物。本文介绍了生物炭的前体种类和制备方法、阐述了二者对生物炭活化能力的影响,总结了生物炭活化过氧化物的机理,分析了水质对降解污染物的影响,综述了生物炭的改性、循环使用及再生,指出了这一技术存在的问题并对后续研究进行了展望。