邻苯二酚和对苯二酚在电活化玻碳电极上的电化学行为及同时测定

制备了电活化的玻碳电极,利用循环伏安法研究了邻苯二酚和对苯二酚在该电极上的电化学行为,结果表明该电极对两者的氧化还原具有很好的电催化能力。在0.1 mol/L PBS(pH 7.0)中,采用示差脉冲伏安法对对苯二酚和邻苯二酚分别测定和同时测定,对苯二酚和邻苯二酚的氧化峰电流与其浓度分别在3.0×10-7～1.2×10-5 mol/L和1.0×10-7～1.2×10-5 mol/L范围内呈良好的线性关系,检测限分别为1.0×10-7和6.34×10-8mol/L(S/N=3)。该法已用于模拟废水样中对苯二酚和邻苯二酚的测定。     

深水多波束测深系统脉冲压缩实时算法

线性调频信号是大时宽带宽积信号,通过脉冲压缩可提高探测距离和分辨率,已在深水多波束测深系统中得到广泛应用。针对深水多波束测深系统中脉冲压缩运算量大的问题,提出了一种基于分组的脉冲压缩实时算法。该算法对需要进行脉冲压缩的波束进行分组,每个节拍只计算一组波束,可大幅减少深水多波束测深系统脉冲压缩的运算时间,节省了处理器资源。该算法已成功应用于某深水多波束测深系统,经多次海试证明,工作稳定可靠。     

大型砂尘风洞中砂尘浓度测量与控制方法的研究

砂尘浓度指标严重影响砂尘风洞试验效果;在大型砂尘风洞中准确的测量及有效的控制砂尘浓度是砂尘风洞设备研制中的两个关键问题;针对动态试验工况环境中浓度传感器标定的问题,分析了浓度测量时标定参数与风速和浓度的关系,使用模型树算法建立了三者之间的关系模型,以此模型来预测各种动态情况下的标定参数;针对复杂环境下浓度动态控制问题,采用专家PID算法,提出了多回路控制系统结构和专家规则;工程实践表明该测量和控制方法满足了动态试验环境的需求,取得了良好效果;模型树算法和专家PID系统能有效的解决动态工况下砂尘浓度的测量与控制问题。     

On a problem of Hornik

In 1991,Hornik proved that the collection of single hidden layer feedforward neural networks(SLFNs)with continuous,bounded,and non-constant activation functionσis dense in C(K)where K is a compact set in R~s(see Neural Networks,4(2),251-257(1991)).Meanwhile,he pointed out"Whether or not the continuity assumption can entirely be dropped is still an open quite challenging problem".This paper replies in the affirmative to the problem and proves that for bounded and continuous almost everywhere(a.e.)activation functionσon R,the collection of SLFNs is dense in C(K)if and only ifσis un-constant a.e..     

Three New Coordination Compounds with Neodymium Based on Tetrazole Containing Carboxylic Acid Ligands

Reactions of three tetrazole containing carboxylic acid ligands, namely, Hpztza, Htzpya, and Hpytza [Hpztza = 5‐(2‐pyrazinyl)tetrazole‐2‐acetic acid, Htzpya = 3‐(5‐tetrazolyl)pyridine‐1‐acetic acid, Hpytza = 5‐(3‐pyridyl)tetrazole‐2‐acetic acid] with NdCl₃ · 6H₂O under hydrothermal conditions, afforded the complexes [Nd(pztza)₂(H₂O)₆] · pztza · 3H₂O ( 1 ), [Nd₂(tzpya)₂(H₂O)₁₂]Cl₄ · 2H₂O ( 2 ), and [Nd(pytza)₂Cl(H₂O)₂] ( 3 ). The compounds were structurally characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. X‐ray diffraction analyses revealed that compound 1 displays a mononuclear structure, 2 shows a dinuclear structure, and 3 features a 1D polymeric chain structure via pytza as linker. Furthermore, the luminescent properties investigated at room temperature in the solid state show that compound 2 has an obvious decrease in its luminescence, when compared to the ligand.     

Pd-catalyzed assembly of phenanthridines from aryl ketone O-acetyloximes and arynes through C–H bond activation

Pd-catalyzed annulation of aryne and aryl ketone O-acetyloxime via C–H bond activation was realized. Through the C–H bond activation/insertion/cyclization/elimination reaction sequence, phenanthridines are successfully constructed, providing an attractive strategy to approach substituted heterocycle without preactivation of starting materials.     

Removal of uranium from aqueous solution by using activated palm kernel shell carbon: adsorption equilibrium and kinetics

Activated palm kernel shell carbon (APKSC) was used to remove U(VI) from aqueous solutions in a batch system. The adsorption kinetics, isotherms, and effects of various parameters, such as temperature, contact time, solution pH, adsorbent dosage, and initial U(VI) concentration on the U(VI) adsorption process were studied. Equilibrium was reached after 120 min in the range of studied U(VI) concentrations and temperatures. U(VI) uptake was insignificantly affected by temperature, but was highly pH dependent, and the optimum pH for removal was 5.5. U(VI) removal efficiency increased with the increasing adsorbent dosage. U(VI) sorption capacity increased with increasing initial U(VI) concentration; any further increases in initial U(VI) concentration above a certain point caused insignificant changes in U(VI) sorption capacity. Isotherm data could be described by the Langmuir isotherm model with a maximum U(VI) adsorption capacity of 51.81 mg/g. Kinetic data were fitted to pseudo-first-order and pseudo-second-order equations, which suggested that the U(VI) adsorption onto APKSC was better reproduced by the pseudo-second-order model rather than pseudo-first-order model. Our results indicated that APKSC might be used as a cheap adsorbent in the treatment of uranium-containing wastewater.     

Self-calibration method for cerium-doped lanthanum bromide scintillator detector in the 0.1–2.0 MeV energy range

In recent years, the cerium-doped lanthanum bromide, LaBr₃ (Ce = 5 %) detector is increasingly playing an important role in radiation measurements because of its higher energy resolution (~3 % at 662 keV), faster luminescence decay time (~35 ns) and higher detection efficiency compared to 7.65 cm × 7.65 cm NaI(Tl) detector. Intrinsic spectra between 1,800 and 3,000 keV derived from internal radioactivity within LaBr₃(Ce) scintillators have been investigated in some literatures, and these results are confirmed by the experiments in this work. In this paper, a new method for LaBr₃(Ce) detector energy calibration from 100 to 2,000 keV is proposed using the intrinsic spectra (self-calibration) instead of the standard gamma sources. Proof-of-concept experiment results show that self-calibration can guarantee energy accuracy of better than 0.815 % and can be applied outside the laboratory. The stability and applicability of this method are also investigated systematically.