The chameleon-like nature of zwitterionic micelles: effect of cation binding

Addition of salts, especially perchlorates, to zwitterionic micelles of SB3-14, C(14)H(29)NMe(2)(+)(CH(2))(3)SO(3)(-), induces anionic character and uptake of H(3)O(+) by SB3-14 micelles. Thus, the addition of alkali metal perchlorates accelerates the acid hydrolysis of 2-(p-heptoxyphenyl)-1,3-dioxolane, HPD, in the presence of SB3-14 micelles, which depends on the local proton concentration at the micelle surface. The addition of metal chlorides to solutions of such perchlorate-modified SB3-14 micelles decreases both the negative zeta potential of the micelles and the observed rate constant for acid hydrolysis of HPD. The effect of the monovalent cations Li(+), Na(+), and K(+) is smaller than that of the divalent cations Be(2+), Mg(2+), and Ca(2+), and much smaller than that of the trivalent cations Al(3+), La(3+), and Er(3+). The major factor responsible for this cation valence dependence of these effects is shown to be electrostatic in nature, reflecting the strong dependence of the micellar surface potential on the cation valence. The fact that the salt effects are not identical after correction for the electrostatic effects indicates that additional secondary nonelectrostatic effects may contribute as well.     

Self-assembled polyelectrolyte multilayered films on Nafion with lowered methanol cross-over for DMFC applications

The paper is concerned with the deposition of self-assembled polyelectrolyte multilayer on Nafion membrane by layer-by-layer (LbL) technique with lowered methanol cross-over for direct methanol fuel cell (DMFC) applications. The formation of self-assembled multilayered film on Nafion was characterized by UV–vis spectroscopy and it was found that the polyelectrolyte layers growth on the Nafion surface regularly. Furthermore, the proton conductivity and methanol cross-over measurements were carried out for characterization of the LbL self-assembled composite membranes. The results showed that the concentration and pH of the polyelectrolytes significantly affect the proton conductivity and methanol barrier properties of the composite membranes. 10⁻¹ monomol polyelectrolyte concentration and pH 1.8 was found to be optimum deposition conditions considering proton conductivity and methanol permeation properties of the LbL self-assembled composite membranes. The methanol permeability of the 10 bi-layers of PAH1.8/PSS1.8 deposited LbL self-assembly composite membrane was significantly suppressed and found to be 4.41 × 10⁻⁷ cm²/s while the proton conductivity value is in acceptable range for fuel cell applications.     

Energy Fluctuation of Ideal Fermi Gas Trapped under Generic Power Law Potential U=Σ_(i=1)~d c_i|x_i/a_i|~(n_i) in d Dimensions

Energy fluctuation of ideal Fermi gas trapped under generic power law potential U=Σ_(i=1)~d c_i|x_i/a_i|~(n_i) has been calculated in arbitrary dimensions.Energy fluctuation is scrutinized further in the degenerate limit μK_B T with the help of Sommerfeld expansion.The dependence of energy fluctuation on dimensionality and power law potential is studied in detail.Most importantly our general result can not only exactly reproduce the recently published result regarding free and harmonically trapped ideal Fermi gas in d =3 but also can describe the outcome for any power law potential in arbitrary dimension.     

Non-isothermal Permeability Impairment by Fines Migration and Deposition in Porous Media including Dispersive Transport

Particle migration and deposition, and resulting permeability impairment occurring in porous media are described by a practical phenomenological model considering temperature variation and particle transport by advection and dispersion. Variation of the filter coefficient and permeability of porous matrix by temperature and particle deposition, and other essential factors are considered by means of the special correlations of the relevant variables and dimensionless numbers. Comparison of the numerical results, obtained using a finite-difference numerical scheme with and without considering the dispersion mechanism and temperature variation, reveals the significance of such effects on fines migration and deposition, and consequent permeability impairment in porous media. Improved model presented in this article can be instrumental for scientifically guided experimentation, analysis, and optimal design of processes involving in transport of colloidal and fine particles through geological subsurface formations.     

Microneedles: One-Plane Bevel-Tipped Fabrication by 3D-Printing Processes

This article presents microneedles analyses where the design parameters studied included length and inner and outer diameter ranges. A mathematical model was also used to generalize outer and inner diameter ratios in the obtained ranges. Following this, the range of inner and outer diameters was completed by mechanical simulations, ranging from 30 μm to 134 μm as the inner diameter range and 208 μm to 250 μm as the outer diameter range. With these ranges, a mathematical model was made using fourth-order polynomial regressions with a correlation of 0.9993, ensuring a safety factor of four in which von Misses forces of the microneedle are around 17.931 MPa; the ANSYS software was used to analyze the mechanical behavior of the microneedles. In addition, the microneedle concept was made by 3D printing using a bio-compatible resin of class 1. The features presented by the microneedle designed in this study make it a promising option for implementation in a transdermal drug-delivery device.     

Intramolecular general acid catalysis of phosphate transfer. nucleophilic attack by oxyanions on the PO3 2- group

Phosphate transfer from the 8-dimethylammonium-naphthyl-1-phosphate monoanion 4m to water and to a range of nucleophiles shows general acid catalysis by the neighboring NH(+) group, through the strong intramolecular hydrogen bond. Reactivity is insensitive to the charge on the nucleophile, so that fluoride and oxyanions displace dimethylaminonaphthol from the PO3(2-) group as effectively as do amines of the same basicity. Reactivity is (predictably) relatively insensitive to the basicity of the nucleophile and to the alpha-effect. A strong intramolecular hydrogen bond is present in the product, but also in the reactant, as evidenced by major perturbations in the pK(a)'s of the phosphate and dimethylamino groups, to 3.94 and 9.31, respectively, and by ab initio calculations. Rate accelerations are of the order of 10(6)-fold despite this stabilization: the strength of the hydrogen bond is evidently significantly enhanced in the transition state. The evidence suggests that it also depends remarkably strongly on the degree of ionization of the reacting phosphate group and will be significantly reduced for the neutral PO(OH)2 group. Thus, the hydrolysis of the substrate cation 4+ shows a correspondingly greater, >10(8)-fold acceleration.     

Nucleophilic attack by oxyanions on a phosphate monoester dianion: the positive effect of a cationic general Acid

The two negative charges on a phosphate monoester RO-PO32- at neutral pH provide a considerable electrostatic barrier toward reactions with nucleophilic reagents with a negative charge on the attacking atom. Electrostatic repulsion disappears when the hydrolysis of an aryl phosphate monoester is catalyzed by a neighboring cationic general acid. The hydrolysis of 8-dimethylammonium-1-phosphate (1) is catalyzed by oxyanions, fluoride anion, and hydroxylamines at similar rates.     

Determination of environmentally important metal ions by fluorescence quenching in anionic micellar solution

This work describes the effect of a variety of metal ions as quenchers of the fluorescence of naphthalene, in aqueous micellar solutions of sodium dodecyl sulfate (SDS). The quenching by the metal ions can be adequately described by the Stern-Volmer equation and the best signal to noise ratios are obtained with low micellized detergent concentrations. Apparent Stern-Volmer constants decrease in the order: Fe3+ > Cu2+ > Pb2+ > Cr3+ > Ni2+ and directly reflect the relative sensitivity of the method for these ions. Detection limits (defined as three times the standard deviation of the blank for n= 10) for the fluorescence quenching of naphthalene by the metal ions in aqueous micellar SDS are in the range of 1.0 x 10(-6) to 1.0 x 10(-5) mol dm(-3). The proposed fluorescence quenching method shows good repeatibility for a variety of added quencher metal ions, indicating that anionic micelle-enhanced fluorescence quenching by metal ions constitutes an analytical method of rather general application.     

Facile Synthesis and Characterization of 5-[(3-Methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole and Its Potentiometric Sensor Application in a Polyvinyl Chloride Membrane for the Determination of Copper(II)

A novel Schiff base designated as 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole was synthesized and characterized. A polyvinyl chloride-membrane potentiometric copper(II)-selective sensor was prepared by using the synthesized 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole compound. The prepared polyvinyl chloride-membrane copper(II)-selective sensor exhibited very good selectivity and sensitive potentiometric response towards copper(II) ions compared to a wide variety of other cations. The sensor had a fast response time of <5?s, and showed a linear Nerstian behavior to copper(II) ions over a wide concentration range from 1.0?×?10^?5 to 1.0?×?10^?1 mol L^?1 with a slope of 29.2?±?0.7 and correlation coefficient of 0.9998. The prepared polyvinyl chloride-membrane copper(II)-selective sensor was used for 14 weeks without any significant change in its potentiometric response. The potentiometric response of the developed sensor was highly repeatable. Additionally, the developed sensor was used as an indicator electrode for the potentiometric titration of copper(II) ion with ethylenediaminetetraacetic acid. The sensor was also successfully applied to the direct determination of copper(II) ions in tap water, river water, and dam water samples.     

Reaction of 1,2-bis(2,6-dicarboxypyridin-4-yl)ethyne with Co(II) generates coordination monomers not polymers: Crystal structure of 4-(2,6-dicarboxypyridin-4-yl)ethynylpyridine-2,6-dicarboxylatotriaqua cobalt(II) monohydrate

Reaction and crystallization of 1,2-bis(2,6-dicarboxypyridin-4-yl)ethyne with Co(II) produces crystals containing monomers of 4-(2,6-dicarboxypyridin-4-yl)ethynylpyridine-2,6-dicarboxylatotriaqua cobalt(II) monohydrate complex (1), [Co(C₁₆H₆N₂O₈)(H₂O)₃]·H₂O, instead of a rigid 1-D metal–organic framework consisting of a linear coordination polymer. This complex crystallizes in the monoclinic space group C2/c with a=6.8028(9) ?, b=36.781(5) ?, c=7.5135(9) 2.474(2)° and Z=4. The complex sits on a symmetry axis such that the two halves of the molecule are related by two-fold rotation symmetry. The molecules form layers in which the molecules are joined by intermolecular O–H⋯O interactions involving hydrogen bonds between CO₂H⋯CO₂ ⁻, H₂O⋯CO₂ ⁻, H₂O⋯CO₂H and H₂O⋯H₂O groups.Supplementary material CCDC-289569 contains the supplementary crystallographic data for this paper. These data can be obtained free of charge via www.ccdc.cam.ac.uk/data request/cif, by e-mailing data request@ccdc.cam.ac.uk or by contacting The Cambridge Crystallographic Data Centre, 12 Union Road, Cambridge CB2 IEZ, UK; fax: +44(0)1223-336033.