Two‐Dimensional Conjugated Aromatic Networks as High‐Site‐Density and Single‐Atom Electrocatalysts for the Oxygen Reduction Reaction

Two‐dimensional conjugated aromatic networks (CAN) with ultra‐thin conjugated layers (ca. 3.5 nm) and high single‐metal‐atom‐site density (mass content of 10.7 wt %, and 0.73 metal atoms per nm²) are prepared via a facile pyrolysis‐free route involving a one‐step ball milling of the solid‐phase‐synthesized polyphthalocyanine. These materials display outstanding oxygen reduction reaction (ORR) mass activity of 47 mA mg_cat.^?1 represents 1.3‐ and 6.4‐fold enhancements compared to Pt and Pt/C in benchmark Pt/C, respectively. Moreover, the primary Zn‐air batteries constructed with CAN as an air electrode demonstrate a mass/volume power density of 880 W g_cat.^?1/615 W cm_cat.^?3 and stable long‐term operation for 100 h. This strategy offers a new way to design high‐performance electrocatalysts with atomic precision for use in other energy‐storage and conversion applications.     

A new building block with intramolecular D-A character for conjugated polymers: ladder structure based on B←N unit

The general strategy to construct D-A type conjugated polymers is alternating copolymerization of electron-donating(D)monomer and electron-accepting(A) monomer. In this article, we report a new strategy to develop D-A type conjugated polymers, i.e. first fuse the D and A units into a polycyclic structure to produce a building block and then polymerize the building block with another unit. We develop a new building block with ladder structure based on B←N unit, B←N bridged dipyridylbenzene(BNDPB). In the skeleton of BNDPB, one diamine-substituted phenylene ring(D unit) and two B←N-linked pyridyl rings(A unit) are fused together to produce the polycyclic structure. Owning to the presence of intramolecular D-A character, the building block itself exhibits narrow bandgap of 1.74 eV. The conjugated polymers based on BNDPB show unique electronic structures, i.e. localized HOMOs and delocalized LUMOs, which are rarely observed for conventional D-A conjugated polymers. The polymers exhibit smaller bandgap than that of the building block BNDPB and display near-infrared(NIR)light absorption(λabs=ca. 700 nm). This study thus provides not only a new strategy to design D-A conjugated polymers but also a new kind of building block with narrow bandgap.     

Isomers of B←N-Fused Dibenzo-azaacenes: How B←N Affects Opto-electronic Properties and Device Behaviors?

The B←N unit has a large dipole and it is isoelectronic to C−C moiety with no dipole. Incorporating B←N units into π-conjugated system is a powerful strategy to design organic small molecules and polymers with intriguing opto-electronic properties and excellent opto-electronic device performance. However, it is unclear how the B←N unit affects electronic structures and opto-electronic properties of large π-conjugated molecules. In this work, to address this question, we developed three dibenzo-azaacene molecules in which two B←N units were introduced at different positions. Although the dibenzo-azaacene skeleton is fully π-conjugated, the effect of B←N unit on the electronic structures of the adjacent rings is much stronger than that of the distant rings. As a result, the three molecules with isomerized B←N incorporation patterns possess different electronic structures and exhibit tunable opto-electronic properties. Among the three molecules, the centrosymmetrical molecule exhibits higher LUMO/HOMO energy levels than those of the two axisymmetrical molecules. When used as the active layer in organic field-effect transistors (OFETs), while the two axisymmetrical molecules show unipolar electron transporting property, the centrosymmetrical molecule exhibits ambipolar hole and electron transporting behavior. This work not only deepens our understanding on organoboron π-conjugated molecules, but also indicates a new strategy to tune opto-electronic properties of organic semiconductors for excellent device performance.     

Fabrication of Nb2O5/C nanocomposites as a high performance anode for lithium ion battery

Nb₂O₅/C nanosheets are successfully prepared through a mixing process and followed by heating treatment.Such Nb₂O₅/C based electrode exhibits high rate performance and remarkable cycling ability, showing a high and stable specific capacity of ~380 mAh g^-1 at the current density of 50 mA g^-1(much higher than the theoretical capacity of Nb₂O₅).Further more,at a current density of 500 mA g^-1,the nanocomposites electrode still exhibits a specific capacity of above 150 mAh g^-1 after 100 cycles.These results suggest the Nb₂O₅/C nanocomposite is a high performance anode material for lithium-ion batteries.     

三效吸收式制冷循环系统性能分析

对12个通用的三效循环系统以及这12个通用循环系统组成的76种可能的密闭循环系统进行了评测。根据通用三效循环系统的压力和溶解度要求,对通用三效循环系统进行了分析,并充分考虑各部件设计中的问题和COPs数值,以及处于高腐蚀环境中部件的数目。通过分析,确定了四个性价比较优的系统:Alkitrate Topping循环系统,Pressure Staged Envelope循环系统,High Overlap循环系统和Dual Loop循环系统。     

“Ghost peaks” of olmesartan medoxomil: Two solution degradation products of olmesartan medoxomil via oxidation mediated by metal ions

Two unknown solution degradants were found during the dissolution testing in 0.1-M HCl for olmesartan medoxomil (OLM) tablets. The structure of the degradants was identified and characterized by liquid chromatography–ultraviolet (LC–UV), liquid chromatography with tandem mass spectrometry (LC–MS/MS), and nuclear magnetic resonance (NMR) and demonstrated to be cyclization of tetrazole and benzene in the olmesartan (OL) and OLM structures. A series of studies including stress studies, simulation studies, and mechanism-based studies were performed to reveal the potential mechanisms that lead to the formation of the unknown degradants. The study results demonstrated that the degradation was catalyzed with radicals that originated from the metal ions leached from the inner surface of high-performance liquid chromatography (HPLC) glass vials with dissolved oxygen under acidic condition. Prerinsing the glass vials with acidic solution dissolved with EDTA can effectively avoid the generation of such oxidative impurities. The present work provides new insights into the understanding of degradation pathways of OLM, which might support the development of OLM tablets.     

多孔离子液体的构筑及应用

多孔液体(Porous Liquids, PLs)是一类结合了多孔固体永久性孔隙与液态流动性优势的新材料. 自2007年, PLs的概念被首次提出以来, 其在合成策略与应用领域方面均取得了较大的突破. 然而, 传统的PLs因高黏度、高密度、高熔点与高原材料成本等缺陷极大程度制约了其在流动工业系统中的大规模应用. 因此, 迫切需要寻求理想的位阻溶剂用于制备先进的多孔液体. 离子液体(Ionic Liquids, ILs)因独特的可调节物理特性、非挥发性、高稳定性、易获得、经济性高、低再生能耗等特性, 使其成为构筑PLs中最具有应用前景的理想溶剂之一. 在过去的5年间, 基于多种ILs与先进多孔固体(如有机笼、金属有机框架、中空碳、沸石、多孔聚合物等)制备的多孔离子液体(Porous Ionic Liquids, PILs)被陆续报道. PILs独特的永久性孔隙、无溶剂挥发、再生能力强、黏度可调、低熔点、高稳定性等特性加快了其在气体吸附、分离、催化、萃取、分子分离等领域的快速发展. 本综述围绕PILs的构筑策略、特性、应用领域等阐述了其研究进展. 最后, 对PILs在制备中存在的挑战与未来的研究方向进行了归纳与展望.     

顺二醇类生物分子的硼亲和分子印迹研究进展EI北大核心CSCD

含顺二酚的分子,如糖类、糖苷和糖蛋白等,在糖组学、代谢组学和蛋白质组学等不同领域都有着至关重要的作用。但是这类样品分子通常存在于非常低丰度的环境中且与许多干扰化合物共存,给临床和生物学上的分离检测带来了巨大的困难。因此,开发建立对顺二醇类化合物简单高效的分离方法具有重要意义。分子印迹技术,是基于模拟生物体内抗原与抗体相互作用原理而发展起来的一种新兴技术,近年来因其特定的分子识别能力以及材料的稳定性和重复性而引起了广泛关注,也在顺二醇类化合物的分离方面得到了许多应用。本综述总结了在顺二醇类化合物的分子印迹方面的最新进展,并对其未来发展的方向和前景进行了讨论。     

Comparative Analysis of Chemical Constituents in Different Parts of Lotus by UPLC and QToF-MS

Six parts of lotus (seeds, leaves, plumule, stamens, receptacles and rhizome nodes) are herbal medicines that are listed in the Chinese Pharmacopoeia. Their indications and functions have been confirmed by a long history of clinical practice. To fully understand the material basis of clinical applications, UPLC-QToF-MS combined with the UNIFI platform and multivariate statistical analysis was used in this study. As a result, a total of 171 compounds were detected and characterized from the six parts, and 23 robust biomarkers were discovered. The method can be used as a standard protocol for the direct identification and prediction of the six parts of lotus. Meanwhile, these discoveries are valuable for improving the quality control method of herbal medicines. Most importantly, this was the first time that alkaloids were detected in the stamen, and terpenoids were detected in the cored seed. The stamen is a noteworthy part because it contains the greatest diversity of flavonoids and terpenoids, but research on the stamen is rather limited.     

金属相1T´ MoS2增强类石墨相C3N4的可见光催化性能

通过煅烧和静电自组装的方法制备了1T′ MoS₂超薄纳米片和类石墨烯相氮化碳(g-C₃N₄)纳米片的复合材料. 该材料在光催化实验中展现出6.24 μmol?g^?1?h^?1的产氢速率, 优于贵金属铂修饰的g-C₃N₄纳米片的性能(4.64 μmol?g^?1?h^?1). 此外, 该复合材料在光催化降解有机染料甲基橙的实验中表现出0.19 min^?1的催化速率, 而纯g-C₃N₄纳米片只有0.053 min^?1的催化速率. 材料光催化性能的提升可归结于1T′MoS₂ 和g-C₃N₄之间的协同效应, 包括光吸收的增强以及因1T′MoS₂优异电子导电性而得到的高效电荷分离.