锂离子电池凝胶聚合物电解质改性的研究现状

从目前凝胶聚合物电解质的研究现状及问题出发,重点介绍了两种改性凝胶聚合物电解质的方法。无机纳米粒子复合凝胶聚合物电解质能够降低结晶型聚合物的结晶度,提高其离子电导率,改善其力学性能和稳定性;多孔凝胶聚合物电解质能够实现在较宽的温度范围内能保持较高的离子电导率和较好的机械强度及尺寸稳定性。最后,对凝胶聚合物电解质的改性研究方向作出了展望。     

基于伴刀豆球蛋白固定过氧化物酶无介体新型生物传感器的研制

以纳米金吸附辣根过氧化物酶,用活化的伴刀豆球蛋白(Con A)将其固定在裸金电极表面,研制成一种新型的无介体辣根过氧化物酶生物传感器。探讨了纳米金的尺寸、组装膜层数、工作电位和pH等实验条件对传感器性能的影响。在pH7.0,外加电压-150mV(vs.SCE)条件下,传感器对H2O2在5.0×10-6~1.2×10-2mol/L范围内呈线性关系;检出限为2.9×10-6mol/L。将传感器用于实际样品的测定,结果良好。     

迁移管的电场强度对真空紫外电离-离子迁移谱仪性能的影响

离子迁移管是离子迁移谱仪的核心部分,它用来产生均匀的电场,以使不同迁移率的离子进行分离。本研究以丙酮为例,详细研究了本课题组所研制的真空紫外电离源-离子迁移谱仪中迁移管的电场参数对离子的灵敏度和分辨率的影响,发现电压的增大灵敏度增大,但是分辨率存在一个最佳的电压,这些结果可用于迁移谱的优化设计。     

Benzylation of Aromatic Compounds with Benzyl Chloride Catalyzed by Nafion/SiO_2 Nanocomposite Catalyst

Diphenylmethane and substituted diphenylmethane are important compounds forsynthesis chemistry as well as industrial chemistry. These compounds are easilysynthesized by the benzylation of aromatic compounds with benzyl chloride or benzylalcohol catalyzed by homogeneous acid catalysts, such as AlCl3, FeCl3, H2SO4, HF andBF3. However, these catalytic systems are highly corrosive, and usually proceed withlow selectivity. In addition, they are less satisfactory from the environmen…     

C20三个异构体稳定性的从头计算研究

采用HF,B3LYP,MP2和QCISD等理论方法在6-31G和6-31G^*基组水平上,对C20的3个主要异构体碟型(Bowl)、笼型(Cage)和环型(Ring)的结构进行理论研究,得出这3个异构体的相对稳定性的次序为:Ring>Bowl>Cage.计算结果显示,分子轨道具有离域特性,电子的这种离域特征有利于原子间更好的成键,可避免出现大的张力,这是Cage型异构体虽然违反“五元环隔离规则”(Isolatedpentagonrule)却能稳定存在的原因.     

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.     

Preparation and application of the sol-gel-derived acrylate/silicone co-polymer coatings for headspace solid-phase microextraction of 2-chloroethyl ethyl sulfide in soil

Three types of novel acrylate/silicone co-polymer coatings, including co-poly(methyl acrylate/hydroxy-terminated silicone oil) (MA/OH-TSO), co-poly(methyl methacrylate/OH-TSO) (MMA/OH-TSO) and co-poly(butyl methacrylate/OH-TSO) (BMA/OH-TSO), were prepared for the first time by sol-gel method and cross-linking technology and subsequently applied to headspace solid-phase microextraction (HS-SPME) of 2-chloroethyl ethyl sulfide (CEES), a surrogate of mustard, in soil. The underlying mechanisms of the coating process were discussed and confirmed by IR spectra. The selectivity of the three types of sol-gel-derived acrylate/silicone coated fibers was studied, and the BMA/OH-TSO coated fibers exhibited the highest extraction ability to CEES. The concentration of BMA and OH-TSO in sol solution was optimized, and the BMA/OH-TSO (3:1)-coated fibers possessed the highest extraction efficiency. Compared with commercially available polyacrylate (PA) fiber, the sol-gel-derived BMA/OH-TSO (3:1) fibers showed much higher extraction efficiency to CEES. Therefore, the BMA/OH-TSO (3:1)-coated fibers were chosen for the analysis of CEES in soil matrix. The reproducibility of coating preparation was satisfactory, with the RSD 2.39% within batch and 3.52% between batches, respectively. The coatings proved to be quite stable at high temperature (to 350 degrees C) and in different solvents (organic or inorganic), thus their lifetimes (to 150 times) are longer than conventional fibers. Extraction parameters, such as the volume of water added to the soil, extraction temperature and time, and the ionic strength were optimized. The linearity was from 0.1 to 10 microg/g, the limit of detection (LOD) was 2.7 ng/g, and the RSD was 2.19%. The recovery of CEES was 88.06% in agriculture soil, 92.61% in red clay, and 101.95% in sandy soil, respectively.     

Preparation of an anionic azo pigment-pillared layered double hydroxide and the thermo- and photostability of the resulting intercalated material

A large anionic pigment has been intercalated into a layered double hydroxide (LDH) host by ion-exchange of an Mg/Al LDH-nitrate precursor with a solution of C.I. Pigment Red 48:2 (the calcium salt of 4-((5-chloro-4-methyl-2-sulfophenyl)azo)-3-hydroxy-2-naphthalene-carboxylic acid), in ethane-1,2-diol. After intercalation of the pigment, the interlayer distance in the LDH increases from 0.86 to 1.72 nm. Infrared spectra and TG-DTA curves reveal the presence of a complex system of supramolecular host-guest interactions. The UV-visible diffuse reflectance spectra of C.I. Pigment Red 48:2 show marked changes after heating at 200 °C and above, whereas there are no significant changes in the spectra of the intercalated pigment after heating at temperatures up to 300 °C, showing that the thermostability is markedly enhanced by intercalation in the LDH host. The pigment-intercalated LDHs exhibits much higher photostability to UV light than the pristine pigment, in the case of both the pure solids and their composites with polypropylene, as shown by measurement of CIE 1976 L^*a^*b^* color difference (ΔE) values.     

A Novel Synthesis of (-)-10-epi-α-Cyperone

The eudesmane derivative, (-)-10-epi-α-cyperone 1, is widely used as a chiral starting material for the synthesis of other fused-ring sesquiterpenes1. The first synthetic work was reported by Howe and co-workers via condensation of (+)-dihydrocarvone 2 with 1-diethylaminopentan-3-one methiodide in 32% yield2. Previously, our group reported the synthesis of compound 1 by treating ketone 2 with ethyl vinyl ketone (EVK) directly under different conditions1a, but the yields were not satisfacto…     

Identification of Different Cobalt Nucleation on Glassy Carbon

The nucleation mechanisms of cobalt from sulfate solutions were studied by utilizing the electrochemical technique, chronoamperometry. It was found that the recorded current-time transients introduced from 1.0mol/L CoSO4 solution were complexes with unusual shapes. All characteristic features were identified as separate process. The instantaneous or progressive nucleation with 2D or 3D growth exists during the cobalt deposition, depending on the applied potentials.