Formation of p-type ZnO film on InP substrate by phosphor doping

ZnO thin film was initially deposited on InP substrate by radio frequency (rf) magnetron sputtering and the diffusion process was performed using the closed ampoule technique where Zn₃P₂ was used as the dopant source. To verify the junction formation of ZnO thin films, the electrical properties were measured, and the effects of Zn₃P₂ diffusion on ZnO thin films were investigated. It is observed that the electrical property of the film is changed from n-type to p-type by dopant diffusion effect. Based on the results, it is confirmed that ZnO thin films can be a potential candidate for ultraviolet (UV) optical devices.     

Diffusion of 99Tc in granite under aerobic and anoxic conditions

Summary  Vezetéknév     

Oligomeric guanidine synthesis assisted by TFA-sensitive arylsulfonylthiourea

Through arylsulfonyl activation of thiourea, efficient synthesis of oligomeric guanidines can be achieved in either solution or solid-phase. Incorporation of TFA-sensitive arylsulfonyl groups, such as Pbf, during the synthesis greatly simplifies deprotection procedures for obtaining the final oligomeric guanidine products.     

Solid codes and the uniform density of fd-domains

By means of further investigation of solid codes,the problem“Is every fd-domain uni- formly dense”proposed by Yuqi Guo,C.M.Reis and G.Thierrin in 1988 is solved in this paper.     

单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.