Direct determination of arsine in gases by inductively coupled plasma-dynamic reaction cell-mass spectrometry

Reliable determination of arsine (AsH₃) in gases is of great importance due to stringent regulations associated with health, safety and environmental issues. It is, however, challenging for an analyst to determine trace airborne arsine concentrations without specifically designed collection procedures using adsorption, desorption, dissolution or impinging techniques. To circumvent such technical barrier, we have newly developed a direct analytical method, characterized by introduction of an arsine gas sample into stable plasma stream, followed by gas-phase oxidation of arsine with molecular oxygen in a dynamic reaction cell (DRC) equipped within the inductively coupled plasma-mass spectrometry (ICP/MS) system, followed by subsequent detection of AsO⁺ ion. This preliminary work used trace arsine concentrations (161 μg m⁻³, 322 μg m⁻³, and 645 μg m⁻³) gravimetrically prepared in N₂ balance. The proposed method was optimized for the important experimental parameters such as the flow rates of the reaction gas, the arsine sample, and the carrier gas. This method was then validated by demonstrating good figure-of-merits including the low limit of detection (0.10 μg m⁻³), good linearity (r² > 0.9915), low measurement uncertainty (0.66%), and high speed of analysis (<6 min). The proposed method is expected to be potentially applicable to the determination of arsine in real workplace air after appropriate modifications are made.     

Capacitance response of double-walled carbon nanotubes depending on surface modification

The capacitive behaviors of high-purity double-walled carbon nanotubes (DWNTs) were investigated before and after oxidation using nitric acid (HNO₃). The electrodes prepared from the HNO₃-oxidized DWNTs have exhibited higher capacitances than the pristine nanotube electrode in both aqueous and non-aqueous systems, despite the deterioration of their specific surface area after HNO₃ oxidation. The superiority of the HNO₃-oxidized DWNTs in capacitance properties is caused by the variations of surface wettability and the interstitial pore structure of nanotube bundles, which result from the introduction of polar oxygen functional groups onto the nanotube surface by HNO₃ oxidation.     

Synthesis and Microcontact Printing of Dual End‐Functionalized Mucin‐like Glycopolymers for Microarray Applications

Click to view : Glycopolymers can be used to display glycans on microarrays in native‐like architectures. The structurally uniform alkyne‐terminated mucin mimetic glycopolymers (see picture; TR=fluorophore) were printed on azide‐functionalized chips by microcontact printing in the presence of a copper catalyst. The surface‐bound glycopolymers bind lectins in a ligand‐specific manner.

     

Study of electrolyte induced aggregation of gold nanoparticles capped by amino acids

This work reports the electrolyte induced aggregation of gold nanoparticles directly conjugated to amino acid by chemical reduction in aqueous solution. The study was focused on three different classes of amino acids depending on the nature of alpha substituent, viz. l-cysteine, l-leucine, and l-asparagine. The band broadening and the red shift of surface plasmon band with increase in flocculation parameter showed the aggregation of gold nanoparticles with increase in electrolyte concentration and decrease in pH as monitored by UV-visible spectrophotometer. The (1)H NMR spectrum demonstrates that the sulfide bond of cysteine and alpha amino group of leucine and asparagine interact with nanoparticles surface. Furthermore, transmission electron microscope (TEM) and thermogravimetric analysis (TGA) were performed to characterize and to support the fate of stabilization of the gold nanoparticles by amino acid.     

Mono-layer of Ni(100-x)Fe(x) nanoparticles fabricated on a polyimide film under different curing atmospheres

A mono-layer of nano-sized metal particles was prepared on the surface of a polyimide film by simply depositing a thin film of Ni80Fe20 on top of the polyamic acid that was spin coated onto a Si wafer. During thermal imidization of the polyamic acid film, Fe was selectively etched by reacting with the carbonyl group of the polyamic acid to leave behind uniformly distributed Ni-rich metallic particles. The average diameter of the particles was 4 nm and the particles were confined into a single layer on top of the polymer film. Moreover, it was also shown that the morphology of the nanoparticles can be substantially altered by curing the precursor film in a hydrogen atmosphere, without significantly damaging the polymer film. Thus produced nanoparticles lay exposed on top of the electrically insulating and chemically stable polymer film so that it is possible that the nanoparticles can be directly used for fabricating a nonvolatile flash memory device or as a template for building functional nano-structures.     

Observation of water condensate on hydrophobic micro textured surfaces

We visually observed that a dropwise condensation occurred initially and later changed into a filmwise condensation on hydrophobic textured surface at atmosphere pressure condition. It was observed that the condensate nucleated on the pillar side walls of the micro structure and the bottom wall adhered to the walls and would not be lifted to form a spherical water droplet using environmental scanning electron microscope.     

Thermodynamic performance of a hybrid air cycle refrigeration system using a desiccant rotor

Due to the concern on global warming, the demand for a system using natural refrigerant is increasing and many researches have been devoted to develop systems with natural refrigerants. Among natural refrigerant systems, an air cycle system has emerged as one of alternatives of Freon gas system due to environmentally friendly feature in spite of the inherent low efficiency. To overcome the technical barrier, this study proposed combination of multiple systems as a hybrid cycle to achieve higher efficiency of an air cycle system. The hybrid air cycle adopts a humidity control units such as an adsorber and a desorber to obtain the cooling effect from latent heat as well as sensible heat. To investigate the efficacy of the hybrid air cycle, the cooling performance of a hybrid air cycle is investigated analytically and experimentally. From the simulation result, it is found that COP of the hybrid air cycle is two times higher than that of the conventional air cycle. The experiments are conducted on the performance of the desiccant system according to the rotation speed in the system and displayed the feasibility of the key element in the hybrid air cycle system. From the results, it is shown that the system efficiency can be enhanced by utilization of the exhausted heat through the ambient heat exchanger with advantage of controlling the humidity by the desiccant rotor.     

Synthesis and Studies of Fluorescein Based Derivatives for their Optical Properties,Urease Inhibition and Molecular Docking

Herein, we design and synthesized new fluorescein based derivatives by insitu formation of fluorescein ester and further treated with corresponding hydrazide and amine to yield respective compounds i.e. FB1, FB2, FB3 and FB4. The spectral purity and characterization was done by using IR, NMR and Mass spectroscopies. The synthesized derivatives were examined for their photophysical properties by using variety of organic solvents and results were discussed in details. The structural diversity of synthesized compounds motivate us to evaluate these compounds for urease inhibition. The compound FB3 (IC₅₀?=?0.0456 μM) shows 100 fold more active against Jack bean urease than standard drug thiourea (IC₅₀?=?4.7455 μM). Other synthesized compounds showed potent activity. Free radical percentage scavenging assay further supported the capacity of compounds to urease inhibition. While, molecular docking simulations helps to examine the molecular interactions of active compounds FB1, FB2, FB3 and FB4 within the binding site of urease enzyme.     

The equilibrium characteristics of pyridoxine hydrochloride sorption on clinoptilolite

Pyridoxine hydrochloride (vitamin B₆) sorption by clinoptilolite from aqueous solutions has been studied at 283, 295, and 317 K. Enhancement of the sorption with decreasing temperature has been found. Isotherm of pyridoxine hydrochloride adsorption from dilute solutions may be described by the Langmuir theory. It has been shown that the monolayer coverage of clinoptilolite surface with pyridoxine occurs via the equivalent exchange with extra-framework cations of the sorbent. Thermodynamic parameters of vitamin monolayer adsorption have been determined. It has been concluded that the polymolecular adsorption is due to the formation of pyridoxine associates in the sorbent mesopores.     

The Smart 2-(2-Fluorobenzoyl)-N-(2-Methoxyphenyl)Hydrazinecarbothioamide Functionalized as Ni(II) Sensor in Micromolar Concentration Level and its Application in Live Cell Imaging

In recent years, fluorescent probes for the detection of environmentally and biologically important metal cations have received extensive attention for designing and development of fluorescent chemosensors. Herein, we report the photophysical results of 2-(2-fluorobenzoyl)-N-(2-methoxyphenyl) hydrazinecarbothioamide (4) functionalized as Ni (II) sensor in micromolar concentration level. Through fluorescence titration at 488 nm, we were confirmed that ligand 4 showed the remarkable emission by complexation between 4 and Ni (II) while it appeared no emission in case of the competitive ions (Cr³⁺, Fe²⁺, Co²⁺, Ba²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cu⁺, Cs⁺). Furthermore, ligand 4 exhibited no toxicity with precise cell permeability toward normal living cells using L929 cell lines in bio imaging experiment investigated through confocal fluorescence microscope. The non-toxic behavior of ligand 4 (assessed by MTT assay) and its ability to track the Ni²⁺ in living cells suggest its possibility to use in biological system as nickel sensor.