Effect of Different Carbon Blacks on the Simultaneous Electroanalysis of Drugs as Water Contaminants Based on Screen‐printed Sensors

For the construction of the sensor, three different carbon black (CB) materials (VULCAN XC72R, BLACK PEARLS 4750 and CB N220) were explored as modifying nanomaterial. Firstly, the electrochemical activity of the each SPE modified was compared by cyclic voltammetry and electrochemical impedance spectroscopy technique, using [Fe(CN)₆]^3?/4? as redox couple. After demonstrating that electrodes modified with different types of CB were characterized by improved electrochemical performances when compared with bare electrodes, and among them, electrodes modified with CB BP4750 is characterised by slightly better electrochemical properties, this type of electrode was used for the development of the analytical method. By applying SWV technique in 0.2 mol L^?1 phosphate buffer (pH 3.0), the obtained analytical curves for ACP and LVF were found linearly from 4.0 to 80.0 μmol L^?1 and from 0.90 to 70.0 μmol L^?1 with limit of detection of 2.6 μmol L^?1 and 0.42 μmol L^?1 for ACP and LVF, respectively. Finally, the quantification of these drugs in river water was evaluated using the new here‐proposed sensor by recovery method in spiked samples, obtaining satisfactory recovery values. The results achieved demonstrated that the developed analytical tool is of great analytical interest being easy to use, cost‐effective, miniaturized, and thus suitable for low cost on site analysis.     

Analytical tools for urocanic acid determination in human samples: A review

Urocanic acid is a chromophore found in the skin that has been identified as an important immunosuppressant and carcinogenesis mediator through its photoisomerization from trans to cis form induced by ultraviolet radiation. Research on analytical methods that explore urocanic acid isomerization is indispensable to fully understand the deleterious effects mediated by this biomarker. In this context, the current relevant analytical methods for determination of these isomers in human samples are summarized in this review. The methods presented here are applicable to human samples collected by noninvasive methods (or minimally invasive), encompassing an array of analytical techniques, including high‐performance capillary electrophoresis, confocal Raman spectroscopy, gas chromatography, high‐performance liquid chromatography, and mass spectrometry, among others. Developed high‐performance liquid chromatography methods have proven to be advantageous, allowing noninvasive collections for in vivo analysis and the confocal Raman, specially, for real‐time analysis. Among all these methods, high‐performance liquid chromatography is the most investigated one with mass spectrometry or ultraviolet detector, and the mass spectrometry detector being the most studied in the last years, demonstrating high sensitivity, very low detection limits, and accurate identification, especially for clinical investigations.     

In vivo determination of the volatile metabolites of saprotroph fungi by comprehensive two‐dimensional gas chromatography

In this work, we discuss the use of multiway principal component analysis combined with comprehensive two‐dimensional gas chromatography to study the volatile metabolites of the saprophytic fungus Memnoniella sp. isolated in vivo by headspace solid‐phase microextraction. This fungus has been identified as having the ability to induce plant resistance against pathogens, possibly through its volatile metabolites. Adequate culture media were inoculated, and its headspace was then sampled with a solid‐phase microextraction fiber and chromatographed every 24 h over seven days. The raw chromatogram processing using multiway principal component analysis allowed the determination of the inoculation period, during which the concentration of volatile metabolites was maximized, as well as the discrimination of the appropriate peaks from the complex culture media background. Several volatile metabolites not previously described in the literature on biocontrol fungi were observed, as well as sesquiterpenes and aliphatic alcohols. These results stress that, due to the complexity of multidimensional chromatographic data, multivariate tools might be mandatory even for apparently trivial tasks, such as the determination of the temporal profile of metabolite production and extinction. However, when compared with conventional gas chromatography, the complex data processing yields a considerable improvement in the information obtained from the samples.     

Capillary electrochromatography of selected phenolic compounds of Chamomilla recutita

This article explores the use of capillary electrochromatography for the analysis of chamomile (Chamomilla recutita L.) extracts. After a thorough study of analytical parameters such as mobile and stationary phase composition, applied voltage, and temperature, a methodology to determine 11 bioactive phenolic compounds (coumarins: herniarin, umbelliferone; phenylpropanoids: chlorogenic acid, caffeic acid; flavones: apigenin, apigenin-7-O-glucoside, luteolin, luteolin-7-O-glucoside; flavonols: quercetin, rutin and flavanone: naringenin) in chamomile extracts was proposed. The method was performed in a Hypersil SCX/C18 column with pH 2.8 phosphate buffer at 50 mmol L(-1) containing 50% acetonitrile (pH adjusted before the addition of the organic solvent). All compounds were separated in less than 7.5 min under isocratic conditions. Figures of merit include linearity (peak area versus apigenin concentration) from 50.0-1000 microg/mL (r2=0.995), and intra-day precision of retention time and peak area better than 1.3% CV and 15%, respectively. The limits of detection and quantification for apigenin were 35.0 microg/mL and 150.0 microg/mL, respectively. This article also describes an NMR 1H study, carried out to monitor a new clean-up procedure for extracts containing propyleneglycol, whose components are poorly retained in conventional octadecyl silica cartridges.     

Development of an analytical method for the determination of the residues of four pyrethroids in meat by GC–ECD and confirmation by GC–MS

The development of an analytical method for the determination of four selected pyrethroid insecticides at residue level in beef meat is presented. Acetone and petroleum ether at 40-60 degrees C were chosen as extraction solvents. A two-step clean-up was performed using an Extrelut NT3-C(18) system followed by a Florisil column, with disposable, ready-to-use cartridges. Instrumental analysis was carried out on a gas chromatograph equipped with an electron capture detector (GC-ECD), using matrix-matched and internal standard calibration techniques. Confirmatory analysis by GC-MS was performed. Recoveries at the EU Maximum Residue Limit (MRL), 0.5 x MRL and 1.5 x MRL levels and the repeatabilities were widely satisfactory. The main advantage of the method was the reduction of analysis time as compared with previously published works. The applicability of the method to different matrices and pesticide classes will be investigated.     

Structural and thermodynamic features of the polyhydroxybutyrate physical gels

The structural and thermal properties of polyhydroxybutyrate (PHB) gels in dimethylformamide (DMF) are presented and discussed. The dilute and semi-dilute mixed PHB/DMF system undergoes a phase separation on cooling at a temperature T_gel, producing a gel in which the crystalline fraction is of the order of 50-60% and the diffraction pattern is that of disperse nano-crystals, with the same unit cell of the pure crystalline PHB. Upon heating, two melting peaks are normally observed at T_m1 and T_m2 (always higher than T_gel). Shapes of the peaks, temperatures and enthalpies of melting depend slightly on scanning rate on heating but on the procedure of gel preparation. Reproducibility and reversibility have always been found with repeated thermal cycles. A thermodynamic phase diagram is therefore constructed and discussed, although the morphology of the system may be subject to the experimental conditions under which the gel is prepared.     

Synthesis,characterization and in vitro antimicrobial prospecting of silver-doped ceria

Journal of Thermal Analysis and Calorimetry - In this work, Ag-doped CeO2 samples containing 0.5 mol% Ag+ were successfully synthesized by the polymeric precursor method and then calcined...     

Temperature dependence on phase evolution in the BaTiO3 polytypes studied using ab initio calculations

Identifying the forces that drive a temperature-induced phase transition is always challenging in the prospect of the first-principles methods. Herein, we perform a first-principles study of the temperature effects on structural, energetic, electronic, and vibrational properties of four BaTiO₃ polymorphs using quasi-harmonic approximations. Study of the stability between these four phases, which we break into contributions arising from the vibration of the lattice, electronic structure, and volume expansion/contraction, is helpful to confirm the sequence of phase transitions as cubic → tetragonal → orthorhombic → rhombohedral, as well as its transition temperatures. A general mechanism was proposed based on the combination between structural distortions at [TiO₆] clusters, vibrational characteristics, and electronic structure. These findings confirm the power of quasi-harmonic approximations to disclose the main fingerprints associated with both thermic and mechanical phase transitions, serving as a guide for further theoretical studies.     

High performance electrochemical sensor based on modified screen-printed electrodes with cost-effective dispersion of nanostructured carbon black

A novel sensor based on a screen-printed electrode (SPE) modified with a stable dispersion of commercially available carbon black (CB) N220 was developed. This probe showed significantly enhanced electrochemical activity relative to a bare SPE when tested with ferricyanide, epinephrine, norepinephrine, benzoquinone and NADH. When challenged in amperometric batch mode with NADH, the response was stable and revealed a linear dependence up to 2·10^?4 mol L^?1 with a detection limit of 3·10^?7 mol L^?1. The analytical performance, coupled with the low cost of the CB nanomaterial, suggests that this sensor holds promise for electrochemical applications.     

The role of copper ions on the structural and magnetic characteristics of MgZn ferrite nanoparticles and thin films

In this study Cu_xMg_0.5−xZn_0.5Fe₂O₄ (x=0-0.5) nanoparticles and thin films were prepared by sol-gel processing. The morphologies of nanoparticles were observed by transmission electron microscope (TEM). The Mössbauer spectroscopy (MS) was employed to determine the site preference of the constitutive elements. Magnetic dynamics of the nanoparticles was studied by the measurement of AC magnetic susceptibility versus temperature at different frequencies. The phenomenological Néel-Brown and Vogel-Fulcher models were employed to distinguish between interacting or non-interacting system. Results exhibited that there is strong interaction between fine particles. X-ray diffraction (XRD) patterns of the thin films indicate the formation of single-phase cubic spinel structure. Atomic force microscope (AFM) was employed to evaluate the surface morphologies of the prepared thin films. Vibrating sample magnetometer (VSM) was employed to probe magnetic properties of samples. It was found that with an increase in the amount of copper, the saturation of magnetization and initial permeability increase.