Nd∶KY(WO4)2和Nd∶KG(WO4)2晶体吸收光谱性能分析

通过研究分析钨酸盐晶体Nd∶KY(WO₄)₂和Nd∶KG(WO₄)₂在室温下的吸收光谱，发现这2种晶体具有作为激光晶体的优良特性。根据Judd-Ofelt理论和测试所得的吸收光谱及数据，用VC++编程计算出晶体的谱线强度、振子强度、吸收截面等，拟合得Nd³⁺离子的3个晶场调节参数Ω_λ(λ=2，4，6)的值，并从理论上计算了自发跃迁几率、能级寿命、荧光分支比和积分发射截面。从计算得出的荧光分支比β可以看出，Nd∶KY(WO₄)₂(β_1060nm=0.4380)和Nd∶KG(WO₄)₂(β_1060nm=0.4618)晶体荧光分支比都较大，计算了该晶体的X=Ω₄/Ω₆，并将其X值与其他晶体的X值加以比较，Nd∶KY(WO₄)₂和Nd∶KG(WO₄)₂均易于实现1.06μm激光输出，适合作为LD泵浦的钨酸盐晶体激光器。     

改进正则化正交匹配追踪波达方向估计方法

针对稀疏阵列模型下匹配追踪波达方向估计方法稳定性不足的问题,提出了改进的正则化正交匹配追踪波达方向估计方法——TROMPDOA(T-transform Regularized Orthogonal Matching Pursuit Directions of Arrival Estimation).仿真表明,TROMPDOA方法在计算复杂度上与原有正交匹配追踪波达方向估计方法OMPDOA(Orthogonal Matching Pursuit Directions of Arrival Estimation)相近,但在估计稳定性上要优于OMPDOA方法,特别是在低信噪比及信号源之间的角度较近时,TROMPDOA方法比OMPDOA方法稳定性提高1倍.实验验证了TROMPDOA方法适用于单元和多元目标估计,估计精度达到1.5°.     

一种基于声相似律的旋转流体机械噪声声源分离方法

针对管道系统中的流体机械发声问题,提出了一种声源函数与声响应函数的频谱分离方法。该方法以声相似律为基础,分别采用最小均方值多重线性回归方法和高斯滤波获得声源函数和声响应函数。通过算例验证了该方法的有效性,辨识得到的声源函数和声响应函数的相对误差均远小于现有方法。利用该方法分析了自由空间和带管道两种安装条件下轴流风扇的辐射噪声,辨识得到了相应的声源函数、声响应函数和叶尖速度律指数,并对风扇的主要噪声成分进行了分析。     

Evaluation and prediction of the degradation of space Si solar cells induced by a low-earth-orbit radiation environment

Space-graded silicon solar cells are evaluated by 1 MeV and 2 MeV electron-irradiation. The mean degradation of the maximum power (P_max) is presented and analyzed. The degradation at both electron energies has been correlated with the displacement damage dose (D_d). A good linearity between the electron D_d and the mean P_max degradation is obtained. The concept of D_d has also been used to predict the Si solar cell response in a low-earth-orbit (Altitude 799 km, Inclination 99^o) radiation environment, considering the shielded effect of a 120 μ m-thick silica coverglass on reducing the radiation. Compared with the on-orbit data from a Si solar array of a Chinese satellite (duration from April 2007 to July 2010), a good match can be found between the on-orbit data and the predicted results using D_d methodology, indicating the method is appropriate for evaluating the radiation damage of the solar cells, and also to provide a new technique for studying radiation effects on the optoelectronic detectors used in many high energy physics applications, where harsh radiation environments produce damage in optoelectronic device materials.     

GdBCO超导体的顺磁性及低温下磁通分布的动态观测

本文研究了100～300K之间Gd1．8Ba2.4Cu3．4O7-δ（简写为GdBCO）超导体的顺磁性，对GdBCO的磁化强度随磁场和温度的变化分别在100K和0．1T进行了测试，GdBCO的顺磁性遵从朗之万顺磁性理论．在磁光显微镜下，低温12K场冷下，我们观察了从0mT～29mT磁通线进入GdBCO的超导体的过程，以及磁通线在GdBCO超导体中的分布。     

高分辨率蓝光光学显微测量系统

本系统用波长为405nm的超亮度蓝色发光二极管作为光学显微镜的照明光源，结合CCD图像传感技术和图像采集技术，实现了对显微图像的实时观察和存取的计算机化。观察到的DVD盘片的清晰显微图像表明，其光学分辨率优于400nm。运用自编的图像分析软件对采集到的CD RW光盘图像进行分析和标定，测定其道间距为1.6μm。因此，本系统在显微观测领域，特别是对观测和分析接近普通光学显微镜分辨极限尺寸的微结构，有重要的实用价值。     

不同窑口古代青瓷的产地特征的中子活化分析

产地属性是科学鉴别遗址和墓葬中出土的古陶瓷烧制产地的重要依据.用仪器中子活化（INAA）有损分析了浙江寺龙口越窑、江西洪州窑和陕西耀州窑出土的古瓷碎片样品,通过实验数据的统计分析,结果表明3个窑口古瓷的元素组成具有各自的特征,它们之间具有可以区分的依据,寺龙口越窑与南方江西洪州窑的制胎原料关系较近,与北方陕西耀州窑的关系较远.这些试验结果将为古陶瓷地研究提供重要参数.Provenance characteristic is an important scientific parameter to identify ancient porcelain wares unearthed from sites and graves.The porcelain samples of Si Long Kou kiln of Zhejiang Province,Hong Zhou kiln of Jiangxi Province and Yao Zhou kiln of Shanxi Province have been analyzed with neutron activation analysis(NAA) in this paper.The experimental data were studied with statistic methods.The results show that the chemical compositions of porcelain body samples for three kilns were different. The difference was been able identified. The body materials of both Si Long Kou Yue kiln and Hong Zhou kiln of Jiangxi were similar. The samples of Yao Zhou kiln in north of China existed obvious difference.     

空心阴极放电沉积氮化碳薄膜的结构和成键性质

利用空心阴极放电等离子体源在Si(100)衬底上沉积了氮化碳薄膜.用XRD,SEM,XPS及拉曼和红外吸收光谱对薄膜的结构、成分和化学键等进行了研究.XRD分析表明,制备的氮化碳薄膜为非晶结构.XPS分析证实了薄膜中以C—C,sp2CN和sp3CN键为主,并得出薄膜中的氮碳比为0.71,而sp3—CN相的含量也达到了0.39.拉曼和红外吸收光谱的结果也与XPS分析的键态结果一致.     

蜂窝密封内耦合传热特性的研究

采用耦合传热数值计算方法,研究了典型航空发动机阶状蜂窝密封内的传热特性,并利用实验数据对数值方法的正确性进行了考核。计算得到的转子面和静子面上换热系数分布与实验值吻合良好。通过对比5种不同的两方程涡黏湍流模型,结果表明:k-ω湍流模型和SST湍流模型在高温度梯度区域对换热系数分布的求解具有较高的精度,明显优于标准k-ε和k-εRNG湍流模型。与光滑面迷宫密封相比,蜂窝芯格结构对转子面上平均换热系数影响较小,但大幅减小了密封静子面上的换热能力;蜂窝芯格结构使得齿尖温度梯度略微增大,但明显使得静子固体区域的温度梯度减小。     

Production mechanism of superheavy nuclei in massive fusion reactions

Within the concept of the dinuclear system (DNS), a dynamical model is proposed for describing the formation of superheavy nuclei in complete fusion reactions by incorporating the coupling of the relative motion to the nucleon transfer process. The capture of two heavy colliding nuclei, the formation of the compound nucleus and the de-excitation process are calculated by using an empirical coupled channel model, solving a set of microscopically derived master equations numerically and applying statistical theory, respectively. Fusion-fission reactions and evaporation residue excitation functions of synthesizing superheavy nuclei (SHN) are investigated systematically and compared them with available experimental data. The possible factors that affecting the production cross sections of SHN are discussed in this workshop.