SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

THE EFFECTS OF HINDERED AMINES ON METHYL METHACRYLATE POLYMERIZATION

The effects of hindered amines, such as TMP, TMPM, TUV-770, on MMA and St homopoly-merization have been studied. It was found that in the MMA polymerization initiated with BPO orAIBN, the presence of TMPM, TUV-770 prolonged the induction period and a little change on R_p wasobserved. However, in the presence of TMP R_p increased slightly. The activation energy of poly-merization and polymerization rate equation were determined.     

有机液体的慢极化介电谱

高绝缘液体存在一种特殊类型的极化响应; 其性质很不同于普通的介电极化响应。后者可用频域方法描述, 称为快响应;前者不能用频域而只能用时域方法描述, 故区别地称为慢响应。在微分时域介电谱中, 每种快或慢极化机构贡献一个峰。苯的时域谱有一个快峰和两个慢峰。室温下石蜡只有一个快峰和一个慢峰; 在加热熔解过程中慢峰分裂为两个峰。慢极化响应和液体中分子的局部束缚空间电荷有关; 慢极化介电谱可以给出分子动力的许多信息。     

C70X2(X=H,F, Cl)的稳定性和电子光谱

用INDO方法研究C70H2四种异构体的稳定性, 表明其最稳定异构体为1, 9-C70H2和7, 8-C70H2, 两者能量差为16.3KJ.mol^-^1, 与实验值及ab initio计算值接近; 光谱计算表明, 其特征吸收峰与实验值一致。在此基础上预测C70F2和C70Cl2的稳定性和电子光谱, 表明C70F2四种异构体的稳定性顺序与C70H2一致, 而C70Cl2则以21, 42-异构体最为稳定。二者的电子光谱与C70H2极其相似只是在500nm以上有细微差别。     

离子印迹介孔材料制备及其吸附重金属的应用

离子印迹介孔材料具有吸附容量高、吸附选择性和骨架稳定等特点,在吸附分离领域有着广泛的应用前景。本文总结了目前离子印迹介孔材料的制备方法,阐述了分步合成法及一步合成法的各自特点;着重介绍了该材料在对重金属吸附和分离领域的研究与应用情况;简要说明了离子印迹介孔材料对重金属离子的吸附机理;并提出了离子印迹介孔材料在制备与应用中存在的问题。     

负载型钌催化剂催化对苯醌制对苯二酚的研究

采用浸渍法制备了负载型高分散纳米Ru催化剂,利用X射线衍射、X射线光电子能谱、透射电子显微镜、N2吸附-脱附实验对催化剂进行了表征,结果显示,Ru以高分散金属态存在,其平均粒径在5nm左右。考察了不同酸碱介质、催化剂与底物物质的量的比、反应温度、H2压力和反应时间对对苯二酚收率的影响。结果表明,以盐酸为反应介质,以5%Ru/AC为催化剂,nRu/AC∶n对苯醌=1∶100,反应温度30℃,H2压力3.0MPa,反应时间30min,对苯二酚的收率可达97.5%。     

基于邻香草醛缩2-氨基-4-硝基苯酚的Schiff碱有机锡配合物的合成、晶体结构及生物活性

邻香草醛缩2-氨基4-硝基苯酚(H₂L)分别与二丁基氧化锡、二苄基二氯化锡反应, 合成了二丁基锡Schiff碱配合物(1)和单苄基Schiff碱配合物(2)。配合物经元素分析、¹H NMR、¹³C NMR、IR、UV-Vis表征, 并用X-射线单晶衍射测定了分子结构。研究了配体H₂L及配合物1、2对癌细胞Hela、MCF7、HepG2、Colo205、NCI-H460的抑制活性, 结果表明配合物1对这5种癌细胞的抑制效果优于现有抗癌药物卡铂, 可作为抗癌药物的候选化合物。在Tris缓冲溶液中, 以EB做为荧光探针, 用荧光光谱法研究了配体H₂L及配合物2与鲱鱼精DNA的相互作用, 结果表明配合物与DNA作用主要是由于Schiff碱配体协同效应所致。     

高效液相色谱法同时测定水果蔬菜中L-抗坏血酸、D-异抗坏血酸、脱氢抗坏血酸及总维生素C的含量

建立了同时测定水果或蔬菜中L-抗坏血酸、D-异抗坏血酸、脱氢抗坏血酸及总维生素C含量的高效液相色谱分析方法。用偏磷酸提取水果或蔬菜样品中L-抗坏血酸、D-异抗坏血酸和脱氢抗坏血酸,提取液中的L-抗坏血酸、D-异抗坏血酸可直接进行检测,脱氢抗坏血酸在磷酸钠溶液中(p H 7.0~7.2)用L-半胱氨酸还原成L-抗坏血酸,之后测定以L-抗坏血酸表达总维生素C含量,脱氢抗坏血酸含量由总维生素C含量减去L-抗坏血酸含量获得。采用C18色谱柱分离,以甲醇-磷酸盐缓冲溶液(p H 3.5)为流动相,在245 nm下检测,外标法定量。结果表明,在0.5~50 mg/L的浓度范围内L-抗坏血酸和D-异抗坏血酸的线性关系良好,相关系数大于0.999,检出限分别为42.0,19.4μg/kg,脱氢抗坏血酸的检出限为262μg/kg。低、中、高3个浓度的加标水平下,3种物质的加标回收率为82.8%~111.3%,相对标准偏差(RSD)小于15%。该方法操作简单,灵敏度高,准确性好,适用于水果和蔬菜中维生素C的测定。     

Synthesis of LiMn2O4 Nano-wires via Flux Method and Their Usage as Cathode Material for Lithium Ion Batteries

LiMn₂O₄ nano-wires with ideal size distribution were readily synthesized by flux method. Samples prepared conventionally were used as the comparison references to investigate the effect of flux. The structural, morphological and electrochemical properties of nano-sized materials were examined by powder X-ray diffraction(XRD) analysis, scanning electron microscopy(SEM) and charge-discharge cycling analysis. Results from galvanostatic charge-discharge analysis show that the samples prepared at 700℃ via flux method(FM-700) afford the highest initial discharge capacity of 125.5 mA·h/g between 3.0 to 4.3 V at a rate of 0.2 C. After 50 cycles, a cycling retention of 89.6% is evident. Overall, the LiMn₂O₄ nano-wires developed in this work seem to be promising cathode materials for lithium ion batteries suitable to different energy-saving settings.     

多芳基吡咯衍生物的发光性质及其应用

荧光分子在良溶剂中基本不发光或发光较弱,而在聚集状态下发光较强的现象,称为聚集诱导发光(Aggregation-induced emission,AIE)现象,这与传统的聚集导致猝灭(Aggregation-caused quenching,ACQ)现象相反。本文研究了多苯基吡咯衍生物的结构与发光性能的关系。通过比较吡咯衍生物的单晶结构和发光性质发现扭曲的结构可以限制共轭发光基团的分子内旋转(RIR),这是产生AIE现象的主要原因。羧酸化的吡咯衍生物可以对Al³⁺实时、选择性检测。由DMF诱导的三苯基吡咯羧酸衍生物(TPPA)重结晶在固态时出现可控的荧光发射,它具备很好的温度选择性,响应迅速,并可以循环利用,这证明TPPA可以作为一种热响应材料用于温度监控设备中。