Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

Indirect boundary element method for unsteady linearized flow over prolate and oblate spheroids and hemispheroidal protuberances

The indirect boundary element method was used to study the hydrodynamics of oscillatory viscous flow over prolate and oblate spheroids, and over hemispheroidal bodies hinged to a plate. Analytic techniques, such as spheroidal coordinates, method of images, and series representations, were used to make the numerical methods more efficient. A novel method for computing the hydrodynamic torque was used, since for oscillatory flow the torque cannot be computed directly from the weightings. Instead, a Green's function for torque was derived to compute the torque indirectly from the weightings. For full spheroids, the method was checked by comparing the results to exact solutions at low and high frequencies, and to results computed using the singularity method. For hemispheroids hinged to a plate, the method for low frequencies was checked by comparing the results to previous results, and to exact solutions at high frequencies. Copyright © 2004 John Wiley & Sons, Ltd.     

Electron Metal-Dielectric Phase Transitions in Semiconductors under Pressure

The effect of uniform pressure on the character of metal-dielectric transitions in compensated weakly- and highly doped semiconductors (WHDCS) is considered. The influence of hybridization of resonance quasilocalized impurity states with band continuum states on the transition is shown. Minimum metallic conductivities in p-CdSnAs₂ are determined for Mott and Anderson transitions. Special features of the metal-dielectric transformation in weakly-doped narrow- and high energy-gap semiconductors are discussed for the case of hydrogen-like impurities. Anderson localization in WHDCS is also considered. Phase diagrams are presented.     

Search for the emission of π<Superscript>0</Superscript> mesons from the neutron-induced fission of <Superscript>235</Superscript>U nuclei

A nuclear-reactor experiment on the search for the emission of neutral pions from the neutron-induced fission of ²³⁵U nuclei has been carried out. To this end, an experimental setup for searching for the emission of π⁰ mesons with high sensitivity to this process has been designed and produced. This setup consisted of two Cherenkov total-absorption spectrometers for the detection and measurements of the energy of two gamma-ray photons from π ⁰-meson decay. The spectrometers were placed at the exits of two coaxial horizontal experimental channels. To protect the detectors from low-energy β and γ rays and neutron fluxes, 3.5-m-long water filters were situated in the channels. To reject the cosmic background, large-area scintillation counters operating in the anticoincidence mode were placed over each spectrometer. The energy and time resolution of the spectrometers, as well as the efficiency of detecting charged particles by scintillation counters, were tested on the secondary electron beam of the Tomsk electron synchrotron Sirius. Runs of measurements of the effect on the operating reactor (duration of 805 h) were alternated with runs of measurements of background on the stopped reactor (duration of 403 h). Statistical processing of the experimental results yields an upper limit of ≤5.3×10 ^?12 with a 90% confidence level for the probability of the emission of neutral pions from the neutron-induced fission of ²³⁵U nuclei. This result and results of other works carried out with sources of spontaneously fissioning ²⁵²Cf nuclei show that the probabilities of the emission of π⁰ mesons from spontaneous fission and fission induced by fission-spectrum neutrons are equal to each other.     

Medicinal Organometallic Chemistry: Designing Metal Arene Complexes as Anticancer Agents

The field of medicinal inorganic chemistry is rapidly advancing. In particular organometallic complexes have much potential as therapeutic and diagnostic agents. The carbon‐bound and other ligands allow the thermodynamic and kinetic reactivity of the metal ion to be controlled and also provide a scaffold for functionalization. The establishment of structure–activity relationships and elucidation of the speciation of complexes under conditions relevant to drug testing and formulation are crucial for the further development of promising medicinal applications of organometallic complexes. Specific examples involving the design of ruthenium and osmium arene complexes as anticancer agents are discussed.     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime

High quality factor of dynamic structures at micro and nano scale is exploited in various applications of micro electro-mechanical systems (MEMS) and nano electro-mechanical system. The quality factor of such devices can be very high in vacuum. However, when vacuum is not desirable or not possible, the tiny structures must vibrate in air or some other gas at pressure levels that may vary from atmospheric to low vacuum. The interaction of the surrounding fluid with the vibrating structure leads to dissipation, thus bringing down the quality factor. Depending on the ambient fluid pressure or the gap between the vibrating and the fixed structure, the fluid motion can range from continuum flow to molecular flow giving a wide range of dissipation. The relevant fluid flow characteristics are determined by the Knudsen number which is the ratio of the mean free path of the gas molecule to the characteristic flow length of the device. This number is very small for continuum flow and reasonably big for molecular flow. In this paper, we study the effect of fluid pressure on the quality factor by carrying out experiments on a MEMS device that consists of a double gimbaled torsional resonator. Such devices are commonly used in optical cross-connects and switches. We only vary fluid pressure to make the Knudsen number go through the entire range of continuum flow, slip flow, transition flow, and molecular flow. We experimentally determine the quality factor of the torsional resonator at different air pressures ranging from 760 Torr to 0.001 Torr. The variation of this pressure over six orders of magnitude ensures required rarefaction to range over all flow conditions. Finally, we get the variation of quality factor with pressure. The result indicates that the quality factor, Q, follows a power law, Q ∝P ^–r , with different values of the exponent r in different flow regimes. In the second part of the paper, we propose the use of effective viscosity for considering velocity slip conditions in solving Navier–Stokes equation numerically. This concept is validated with analytical results for a simple case and then compared with the experimental results presented in this paper. The study shows that the effective viscosity concept can be used effectively even for the molecular regime if the air-gap to length ratio is sufficiently small (h ₀/L<0.01). As this ratio increases, the range of validity decreases.     

A brief review on structural concepts of novel supramolecular proton transfer compounds and their metal complexes

Our research group has been interested in synthesis of proton transfer compounds as new supramolecular synthons for the onepot preparation of self-assembled transition metal complex-organo-networks since 2000. We have focused on the proton delivery from acids, which are considered as suitable proton donors, to amines as proton acceptors. The results were production of several proton transfer ion pairs possessing some remaining donor sites applied for coordination to metallic centers in preparation of metal-organic structures. Some of the complexes showed contributions of both cationic and anionic fragments of the starting ion pair, while some others contained only one of these species as ligand. Much of the investigations on reviewed compounds focused on the concept of supramolecular systems, co-crystallization, stereochemically active lone pairs, coordination polyhedron and mainly on various interactions involve including van der Waals, ion pairing, hydrogen bondings, face to face π-π stackings and edge to face C-H...π, C-O...π, N-H...π, S-O...π, Ti...π and Hg-Cl...π interactions. The mentioned interactions are the most commonly used strategies in the extension of supramolecular structures.     

Effect of the incomplete accommodation of the heterogeneous recombination energy on heat fluxes to a quartz surface

Taking both the heterogeneous catalytic processes, including the surface formation of particles with excited internal degrees of freedom, and the processes of multicomponent diffusion and heat transfer in the MESOX apparatus fully into account makes it possible to obtain a recombination coefficient and an accommodation coefficient of the oxygen-atoms-on-quartz recombination energy which are in good agreement with the experimental data. The heterogeneous catalysis model constructed can be used effectively for predicting the heat fluxes to the surface of reentry vehicles on their entry into the Earth’s atmosphere.