On a Modification of the Scintillation Method

We solve the problem of diffraction of fluctuating radiation by an optically thin irregular layer (phase screen) with developed turbulent structure. It is shown that in the case of diffraction of radiation with saturated fluctuations and a narrow-band frequency spectrum by a weakly turbulent moving phase screen, the measured frequency spectrum of intensity fluctuations in the observation plane allows one to obtain information on the form of the spectrum of irregularities of an optically thin irregular layer in a wide size range significantly exceeding the size of the first Fresnel zone. Similarly to the well-known phase method of diagnostics of randomly irregular media, the conventional scintillation method modified in such a way yields undistorted information on the form of the irregularity spectrum. However, in contrast to the phase method, it also allows one to obtain data on the drift velocity of irregularities in the studied irregular layer.     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Optimal vaccine scheduling in cancer immunotherapy

Cancer immunotherapy aims at stimulating the immune system to react against cancer stealth capabilities. It consists of repeatedly injecting small doses of a tumor-associated molecule one wants the immune system to recognize, until a consistent immune response directed against the tumor cells is observed.

We have applied the theory of optimal control to the problem of finding the optimal schedule of injections of an immunotherapeutic agent against cancer. The method employed works for a general ODE system and can be applied to find the optimal protocol in a variety of clinical problems where the kinetics of the drug or treatment and its influence on the normal physiologic functions have been described by a mathematical model.

We show that the choice of the cost function has dramatic effects on the kind of solution the optimization algorithm is able to find. This provides evidence that a careful ODE model and optimization schema must be designed by mathematicians and clinicians using their proper different perspectives.     

Measurements of theg-factor ratio of the first 3− and 5− states in40Ca and the lifetime of the 5− state

[Theg-factor ratio of the first excited 3^? and 5^? states in⁴⁰Ca was measured to beg ₃/g ₅=1.01(10) employing the implantation perturbed angular correlation technique. The static hyperfine fields (SF) in Fe and Gd hosts were used. In addition the lifetime of the 5^? state was measured to be τ=426(7)ps. The values of the SF in Gd and Fe hosts were deduced and compared with systematics in this element region.     

Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Antimagnons in ferrimagnets

Purely antiferromagnetic intrinsic oscillations of magnetic ions in a tetragonal ferrimagnet are considered. The magnetic ions occupy two double positions (forming four magnetic sublattices) so that the center of symmetry for each position is not a closed element. Not involving the total magnetization vector, the oscillations are not excited by the magnetic field; however, the oscillations can be excited by an alternating electric field or by a combination of a constant electric field and the alternating magnetic field of a certain frequency. This phenomenon is a dynamic manifestation of the magnetoelectric interaction. These oscillations, representing a new special type of spin waves (magnons), were called antimagnons. The intrinsic frequencies of antimagnons, as well as the corresponding susceptibilities, were determined. Quantitative estimates were obtained for a Mn₂Sb-based ferrimagnetic phase in both easy-axis and easy-plane orientation states.     

Synthesis of ladder-type filters based on SAW resonators

A synthesis method for ladder-type filters based on SAW resonators is described. SAW devices are designed with modified equations for coupled waves. Nomograms for choosing the geometry of the filters on ST, X-cut quartz and on 36° Y, X-cut LiTaO₃ substrates are presented. Theoretical results are compared with experimental data.