Assessment of Reproducibility of Laser Electrospray Mass Spectrometry using Electrospray Deposition of Analyte

A nonresonant, femtosecond (fs) laser is employed to desorb samples of Victoria blue deposited on stainless steel or indium tin oxide (ITO) slides using either electrospray deposition (ESD) or dried droplet deposition. The use of ESD resulted in uniform films of Victoria blue whereas the dried droplet method resulted in the formation of a ring pattern of the dye. Laser electrospray mass spectrometry (LEMS) measurements of the ESD-prepared films on either substrate were similar and revealed lower average relative standard deviations for measurements within-film (20.9%) and between-films (8.7%) in comparison to dried droplet (75.5% and 40.2%, respectively). The mass spectral response for ESD samples on both substrates was linear (R²?>?0.99), enabling quantitative measurements over the selected range of 7.0?×?10^?11 to 2.8?×?10^?9 mol, as opposed to the dried droplet samples where quantitation was not possible (R²?=?0.56). The limit of detection was measured to be 210 fmol.

Open image in new window

Graphical Abstract ?

     

Contribution of the surface dipole moment and the contact potential-induced disjoining pressure to the stress balance at a three-phase contact

The contact between three insulators results in a set up of contact potentials related to the adsorbed dipole moment at each surface. The produced electric field applies force (disjoining pressure) on each interface. This disjoining pressure is a long-ranged force (1/distance²) which is proportional to the difference between the dielectric permittivities of the phases on the two sides of the interface and, for small angles, to the square of the contact angle. The contact potential leads to a logarithmic perturbation of the profile of the three-phase contact zone.     

Synthesis of hydrated tungsten(VI) oxide sols by peptization

A method has been developed for the synthesis of hydrated tungsten oxide hydrosols, with this method being based on potassium tungstate hydrolysis followed by peptization of the formed precipitate. The influence of the conditions of precipitation, aging, and washing of the precipitate on the particle phase composition and shape and the degree of precipitate peptization has been studied. Hydrosol-particle sizes have been determined by different methods. It has been found that the dispersed phase of the hydrosols consists mainly of platelike particles of hydrated tungsten oxide WO₃ · 2H₂O with a number-average size of 52 nm. The sols are stable to aggregation in a pH range of 3.0–4.5. The zeta potential of the particles ranges from–33 to–38 mV.     

A New Approach to Increasing the Resolution of a Mass Spectrometer with Wedge-Shaped Reflectors

The paper describes the investigation of the ion-optical properties of a laser TOF mass spectrometer including two successively positioned wedge-shaped ion mirrors. Some specific properties of the configuration of ion trajectories near their reflection in the second ion reflector are found. The dependence of aberrations on ion energy acquired toothed shape for the resolution of the analyzer higher than 3000–5000. The approximation of the dependence gave a 15^th degree polynomial. The calculation of polynomial coefficients showed a great contribution to the duration of ion packets for aberrations of higher order. The discovered features allowed us to suggest a way of the local correction of nearby trajectories in the total ion flux. By correcting the local motion of individual groups of ions, we could reduce temporary aberration to 1–1.6 ns, depending on ion energy. For the time of ion flight ~35 μs, such duration limits the resolution of the analyzer by a value not less than 10000. The real length of ion drift path was about 30 cm. The total overall sizes of the ionoptical system were ~24 × 19 × 5 cm.     

Primary photophysical and photochemical processes for Pt(SCN)<Subscript>6</Subscript><Superscript>2–</Superscript> complex

Photosolvation of a Pt^IV hexathiocyanate complex Pt(SCN)₆ ^2– in water and ethanol was studied by steady-state photolysis, nanosecond laser flash photolysis, and ultrafast kinetic spectroscopy. Complexes Pt(SCN)₅(H₂O)^– and Pt(SCN)₅(C₂H₅OH)^– were found to be the only reaction products. The quantum yields of photosolvation are independent of the excitation wavelength, being equal to 0.25 and 0.5 for the solutions of the complex in water and ethanol, respectively. Photosolvation proceeds by the mechanism of heterolytic metal—ligand bond dissociation without involvement of redox processes. The characteristic time of formation of the end products for both solvents is about 10 ps. Three successive intermediates detected on the picosecond time scale were interpreted as Pt^IV complexes. The nature of the intermediates and possible mechanisms of photosolvation are discussed.     

Alkylation of phenol with olefins in the presence of catalysts based on mesoporous aromatic frameworks

Mesoporous polyaromatic frameworks (PAFs) based on tetraphenylmethane were obtained and modified with sulfonic acid groups. The compounds were characterized by solid-state ¹³C NMR and IR spectroscopy, low-temperature nitrogen adsorption-desorption, and transmission electron microscopy. The acidities of the PAF-1-SO₃H and PAF-2-SO₃H samples determined by titration were 3.99 mmol g^–1 and 0.91 mmol g^–1, respectively. The catalytic activity of PAF-SO₃H for alkylation of phenol with linear terminal olefins was investigated. The reaction products were isomeric monoalkylphenols (C-alkylates), and alkyl phenyl ethers (O-alkylates).     

Preconcentration and separation of <Superscript>99</Superscript>Tc in groundwater by using TEVA resin

An effort has been made to optimize the counting time for low-level measurement of naturally occurring radioactive material (NORM) by considering the standard deviation between the activity values of different photopeaks and counting error. It is observed that at lower counting time, relative standard deviation (RSD) varies randomly, but attains a gradual trend with increasing time and also comes closure to the counting error. Therefore minimum counting time for low-level NORM measurement of ²³⁸U and ²³²Th would be the time required to stabilize the RSD values.     

Polyethylenimine and tris(2-aminoethyl)amine modified p(GA–EGMA) microbeads for sorption of uranium ions: equilibrium,kinetic and thermodynamic studies

Poly(glycidyl methacrylate-ethyleneglycol dimethacrylate), p(GA–EGMA), microbeads were prepared through suspension polymerization. It was decorated with polyethylene imine (PEIM) and tris(2-aminoethyl)amine (TAEA) ligands to decorate with polyamine groups. These microbeads were used for sorption of uranium ions from aqueous solution. The maximum sorption of uranium ions on the PEIM and TAEA modified microbeads was observed at pH 6.0. The maximum sorption capacity of acid hydrolyzed p(GA–EGMA)–OH, p(GA–EGMA)–PEIM and p(GA–EGMA)–TAEA microbeads was found to be 7.21, 87.8 and 64.3 mg g^?1. The sorption process conforms to the pseudo-second order kinetic model and the Langmuir and Temkin isotherm models well.     

Measurement of <Superscript>3</Superscript>H,gross <Emphasis Type="Italic">α/β</Emphasis> and <Superscript>222</Superscript>Rn in drinking water using the new Quantulus GCT 6220

Since the introduction of the European Council Directive 2013/51 Euratom in October 2013, the analysis of drinking water has increasingly become the focus of many laboratories in Europe. The activity of tritium, radon and the gross α/β-activity is determined routinely. In order to cope with the increased sample numbers and to reach the necessary detection limits, sensitive measuring devices are required. This work was done with the new Quantulus GCT 6220 to test the sensitivity of this system for drinking water analysis. The results indicate that this instrument is very well suited for this type of analysis and counting times are typically below the required counting times of established systems.     

Structural requirement of C11b chirality of tetrabenazine analogs as VMAT2 imaging ligands: synthesis and in vivo evaluation

We studied on the structural requirement of C11b chirality of tetrabenazine (TBZ) analogs as vesicular monoamine transporter 2 (VMAT2) ligands. TBZ analogs (2, 6a, 6b) and ¹⁸F-radiolabeled [¹⁸F]6a and [¹⁸F]6b with eliminated C11b chirality were synthesized and characterized. Competition studies demonstrated that 2, 6a and 6b displayed much lower in vivo VMAT2 bindings than TBZ. MicroPET imaging studies of [¹⁸F]6a and [¹⁸F]6b showed negligible accumulation in VMAT2-enriched regions as compared with the known VMAT2 ligand ¹⁸F-FP-(+)-DTBZ. These results suggest that C11b chirality of TBZ analogs is essential for in vivo VMAT2 binding bioactivity.