Evaluation of the accuracy of the determination of lead isotope ratios in wine by ICP MS using quadrupole, multicollector magnetic sector and time-of-flight analyzers

Different mass analysers [(quadrupole (Q), time-of-flight (TOF) and multicollector (MC) sector-field (SF)] of ions produced in an inductively coupled plasma were evaluated for the determination of lead isotope ratios in wine samples. A population of 20 wines of different origin including two reference wines from the EC Standards, Measurement and Testing Programme with concentrations varying between 7-140 mug Pb l(-1) was investigated. Wines were analyzed directly by Q ICP MS and MC ICP MS. The poor sensitivity of the TOF instrument, further aggravated by matrix signal suppression, did not allow the acquisition of data for wine samples that contained less than 50 mug l(-1) in the direct sample introduction mode. The separation and preconcentration of lead were therefore required. The precision obtained for the (206)Pb/(207)Pb and (208)Pb/(206)Pb were similar and equal to 0.14-2.7% for Q ICP MS, 0.04-0.17% for TOF ICP MS and 0.01-0.12% for MC ICP MS. The precision for (206)Pb/(204)Pb was 0.44-5.29, 0.15-1.7, 0.08-1.6%, respectively. On the level of accuracy, the data from TOF ICP MS and MC ICP MS were in good agreement. The accuracy of Q ICP MS data was judged satisfactory in comparison with the other techniques but their poor precision was a significant obstacle on the way of using these data for the determination of the geographic origin of wine.     

Direct quantitative determination of surface Brønsted acidity of solids by H/D exchange using D2O

A highly flexible method for direct and quantitative determination of surface Br?nsted acidity of solids in terms of number, type and strength of the acid sites based on quantitative H/D exchange kinetics between the acid solid and gaseous D2O has been developed and applied to materials covering the whole range of acidity.     

Investigating the interface of superhydrophobic surfaces in contact with water

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.     

Speciation of organotin in environmental sediment samples

An optimized sample preparation procedure for organotin speciation in sediment samples has been applied to the analysis of sediments collected in the environment. The method is based on tropolone complexation of the ionic organotins, followed by extraction into a hexane-ethylacetate mixture and derivatization by NaBEt(4). The method was applied to the determination of organotin in various harbour, shipyard and dry-dock sediments in Belgium. Butyltin compounds were detected in all samples analyzed, often at high mg kg(-1) levels. A limited number of samples showed the presence of phenyltin compounds. Further, the method was adapted to the analysis of river sediments sampled from the vicinity of shipyards. Butyltin concentrations were detected at the microg kg(-1) level in the majority of samples.     

Unexpected ring transformation to pyrrolo[3.2-b]pyridine derivatives. Fused azolium salts. 22

2-Arylsulfanyl and 2-benzylsulfanylpyridinium N-arylimides (2) easily prepared from 3-aryltetrazolopyridinium salts (1) with aryl and benzylthiolates, respectively, reacted with various dipolarophiles yielding cycloadducts that underwent transformation to give tetrahydropyrrolo[3,2-b]pyridines (5, 6, and 8) in good yields. A similar rearrangement (formation of 15) was also observed in the case of parent derivatives being unsubstituted in position 2 (12). The abscence of any significant solvent effect, comparison of the sulfur and non-sulfur analogues, as well as the stereoselective nature of the observed ring transformation seem to support a sigmatropic mechanism. Structure elucidation of the products has been carried out by single-crystal X-ray diffraction and (1)H NMR experiments.     

New example of a non-heme mononuclear iron(IV) oxo complex. Spectroscopic data and oxidation activity

The green complex S=1 [(TPEN)FeO]2+ [TPEN=N,N,N',N'-tetrakis(2-pyridylmethyl)ethane-1,2-diamine] has been obtained by treating the [(TPEN)Fe]2+ precursor with meta-chloroperoxybenzoic acid (m-CPBA). This high-valent complex belongs to the emerging family of synthetic models of Fe(IV)=O intermediates invoked during the catalytic cycle of biological systems. This complex exhibits spectroscopic characteristics that are similar to those of other models reported recently with a similar amine/pyridine environment. Thanks to its relative stability, vibrational data in solution have been obtained by Fourier transform infrared. A comparison of the Fe=O and Fe=(18)O wavenumbers reveals that the Fe-oxo vibration is not a pure one. The ability of the green complex to oxidize small organic molecules has been studied. Mixtures of oxygenated products derived from two- or four-electron oxidations are obtained. The reactivity of this [FeO]2+ complex is then not straightforward, and different mechanisms may be involved.     

Interactions between hen egg-white lysozyme, PEG2,000, and PLA50 at the air-water interface

In this paper, we compared the efficiency of polymer films, made of a poly(ethylene glycol) (PEG2,000)/poly(d,l-lactide) (PLA50) mixture, or a PEG2,000-PLA50 copolymer, to prevent adsorption of a model protein, the hen egg-white lysozyme (HEWL), at the air-water interface. This was achieved by analyzing the surface pressure/surface area curves, and the X-ray reflectivity data of the polymer films spread on a Langmuir trough, obtained in absence or in presence of the protein. For both the mixture and the copolymer, the amount of protein adsorbed at the air-water interface decreases when the density of the polymer surface coverage increases. It was shown that even in a condensed state, the polymer film made by the mixture can not totally prevent HEWL molecules to adsorb and penetrate the polymer mixed film, but however, protein molecules would not be directly exposed to the more hydrophobic phase, i.e. the air phase. It was also shown that the configuration adopted by the copolymer at the interface in its condensed state would prevent adsorption of HEWL molecules for several hours; this would be due in particular to the presence of PEG segments in the interfacial film.     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.