Grid control over high currents in a cesium discharge with a cathode spot

We report on the results of investigation of a plasma switch with complete grid control in a discharge with a cathode spot on the liquid-metal cesium cathode without grid diaphragming. The retention of the working area of the grid relative to the anode area leads to an order-of-magnitude increase in the switching anode current (up to 20 A/cm² over the anode area) and a substantial (up to 100 V and higher) increase in the switching voltages. The use of the cathode jet makes it possible to reduce the working pressures of cesium vapor (down to 10^–3 Torr). We discuss the results of analysis of peculiarities of grid discharge quenching in such a switch, which make it possible to determine possible reasons for limitation of the working parameters of the switch and the ways of their further increase.     

High-Field Asymmetric-Waveform Ion Mobility Spectrometry and Electron Detachment Dissociation of Isobaric Mixtures of Glycosaminoglycans

High-field asymmetric waveform ion mobility spectrometry (FAIMS) is shown to be capable of resolving isomeric and isobaric glycosaminoglycan negative ions and to have great utility for the analysis of this class of molecules when combined with Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and tandem mass spectrometry. Electron detachment dissociation (EDD) and other ion activation methods for tandem mass spectrometry can be used to determine the sites of labile sulfate modifications and for assigning the stereochemistry of hexuronic acid residues of glycosaminoglycans (GAGs). However, mixtures with overlapping mass-to-charge values present a challenge, as their precursor species cannot be resolved by a mass analyzer prior to ion activation. FAIMS is shown to resolve two types of mass-to-charge overlaps. A mixture of chondroitin sulfate A (CSA) oligomers with 4–10 saccharides units produces ions of a single mass-to-charge by electrospray ionization, as the charge state increases in direct proportion to the degree of polymerization for these sulfated carbohydrates. FAIMS is shown to resolve the overlapping charge. A more challenging type of mass-to-charge overlap occurs for mixtures of diastereomers. FAIMS is shown to separate two sets of epimeric GAG tetramers. For the epimer pairs, the complexity of the separation is reduced when the reducing end is alkylated, suggesting that anomers are also resolved by FAIMS. The resolved components were activated by EDD and the fragment ions were analyzed by FTICR-MS. The resulting tandem mass spectra were able to distinguish the two epimers from each other.

Micrometer scale gel patterns

A novel method for fabricating micrometer sized gel patterns is described. The presented method involves spin-coating a pre-gel solution on a surface that was chemically treated to modulate its surface energy, creating highly hydrophobic areas on a hydrophilic substrate. Following spin-coating, the gel solution self organizes on the hydrophilic sites. This method offers the advantages of high resolution, self-alignment to pre-patterned electrodes, and a simple straightforward fabrication process. Minimum feature size achieved was approximately 20 μm. The characteristic shrinking and swelling times of gel patterns were measured and found to be around 0.6 s for swelling and 2 s for shrinking (for a 60 μm diameter gel) in agreement with the reduced response time expected for scaled down gel patterns. These results suggest the suitability of these gel patterns as valves or actuators in microfluidic devices. Micron-size gel patterns were also incorporated into microfluidic channels thus demonstrating a new approach to create simple, affordable, microfluidic devices, which incorporate “smart” hydrogels as building elements in a simple fashion.     

Electrical Conductivity in TCNQ Salts of Bis(4-dimethylaminophenylimino) sulfur and its Structural Analogues

Four compounds, N,N,N',N'-tetramethyl-p-phenylene diamine, N,N,N',N'-tetramethyl-benzidine, 4,4'-bis(dimethylamino)azobenzene and bis(4-dimethylaminophenylimino)sulfur (BAPIS) were examined electrochemically and spectroscopically. Each was shown to be a fairly good donor forming in its first oxidation state a radical-cation. The latter two materials surprisingly exhibited only single one-electron oxidations. Conformational flexibility about the -NSN- unit was studied by NMR spectroscopy and ab initio molecular orbital theory. The experimental ΔG* for a cis-trans to trans-cis interconversion in BAPIS was found to be 11.9 kcal/mole.

The four donors all form 1:1 adducts with TCNQ. The compaction resistances of the complexes have been measured as a function of temperature. Of the four, (BAPIS)(TCNQ) appears to be a one-dimensional material. The other three complexes behave as typical mixed stack organic semiconductors.     

The equilibrium and preequilibrium neutron-emission spectra of some structural fusion materials for (<Emphasis Type="Italic">n</Emphasis>, <Emphasis Type="Italic">xn</Emphasis>) reactions up to 16 MeV energy

In this study, neutron-emission spectra produced by (n, xn) reactions for some structural fusion materials as ²⁷Al, ⁵¹V, ⁵²Cr, ⁵⁵Mn, and ⁵⁶Fe have been investigated by a neutron beam up to 16 MeV. Multiple preequilibrium mean-free-path constant from internal transition and the preequilibrium and equilibrium level-density parameters have been investigated for some (n, xn) neutron-emission spectra calculated in this study. Preequilibrium neutron-emission spectra were calculated by using new-evaluated hybrid model and geometry-dependent hybrid model, full-exciton model, and cascade-exciton model. The reaction equilibrium component was calculated by Weisskopf-Ewing model. The obtained results have been discussed and compared with the available experimental data and found agreement with each other. The text was submitted by the authors in English.     

Velocity-independent microfluidic flow cytometry

Pressure-driven flow in microfluidic channels is characterized by a distribution of velocities. This distribution makes it difficult to implement conventional flow cytometry data analysis. We have demonstrated a method to measure velocity as an independent parameter when performing microfluidic flow cytometry. This method allows velocity-independent analysis of particles such as beads or cells, and allows flow cytometry analysis of extended objects, such as long DNA molecules. It allows accurate flow cytometry in transient and nonuniform flows. This general measurement method could be used in the future to measure the velocity of particles in a variety of existing microfluidic devices without the need for changes in their design.