Adhesion between graphite and modified polyester surfaces: a theoretical study

This study examines the adhesion of graphite to functionalized polyester surfaces using a range of qualitative and quantitative measures of theoretical adhesion. Modifications to the polyester surfaces include the addition of hydroxyl, carboxyl, or fluorine substituents with coverages of 0.4 and 0.9 groups per nm(2). In each case, the introduction of substituents to the surface of the polyester was calculated to lead to reduced adhesion to graphite. Effects of surface relaxation on adhesion are studied by employing different simulation protocols. The theoretical results suggest one mechanism to reduce adhesion to carbonaceous solids is to increase atomic roughness using strongly hydrophilic or alternatively strongly hydrophobic substituents.     

In situ time-resolved characterization of Au-CeO2 and AuOx-CeO2 catalysts during the water-gas shift reaction: presence of Au and O vacancies in the active phase

Synchrotron-based in situ time-resolved x-ray diffraction and x-ray absorption spectroscopies were used to study the behavior of nanostructured {Au+AuO(x)}-CeO(2) catalysts under the water-gas shift (WGS) reaction. At temperatures above 250 degrees C, a complete AuO(x)-->Au transformation was observed with high catalytic activity. Photoemission results for the oxidation and reduction of Au nanoparticles supported on rough ceria films or a CeO(2)(111) single crystal corroborate that cationic Au(delta+) species cannot be the key sites responsible for the WGS activity at high temperatures. The rate determining steps for the WGS seem to occur at the gold-ceria interface, with the active sites involving small gold clusters (<2 nm) and O vacancies.     

Diversity-generation from an allenoate-enone coupling: syntheses of azepines and pyrimidones from common precursors

Amine-catalyzed coupling reactions of allenoate esters and α,β-unsaturated carbonyls lead to a diverse range of α,α′-disubstituted allenoates. With appropriately substituted monomers, intermolecular reactions can lead to pyrimidone products. Alternatively, with amine substituted allenoates, a 7-endo-dig cyclization can be carried out such that a divergent pathway is observed that leads to azepine scaffolds.     

The formation of dimetallocycles from reactions of alkynes with (η-C5Me5)2Rh2(CO)2; X-ray structure of [(η-C5Me5)2Rh2(η-CO) {μ-η2,η2-C(O)C2-(CF3)2}]

The complexes (η-C₅Me₅)₂Rh₂(μ-CO) {μ-η²,η²-C(O)CRCR} are obtained from reactions between (η-C₅Me₅)₂Rh₂(CO)₂ and the alkynes RCCR (R  CF₃, CO₂Me, or Ph) at 25°C. The molecular geometry of the complex with R  CF₃ has been established by X-ray diffraction; the bridging 'ene-one' unit adopts a μ-η²,η² conformation. Other complexes isolated from these reactions include (η-C₅Me₅)Rh(C₆R₆) (R  CF₃, CO₂Me), (η-C₅Me)₂Rh₂(C₄R₄) (R  CO₂Me) and (η-C₅Me₅)₂Rh₂(CO₂C₂R₂) (R  Ph). The reaction between (η-C₅Me₅)₂Rh₂(CO)₂ and C₆F₅CCC₆F₅ gives (η-C₅Me₅)₂Rh₂(CO)₂(C₆F₅C₂C₆F₅). Mononuclear complexes such as (η-C₅Me₅)Co(C₄R₄CO) are the major products isolated from reactions between (η-C₅Me₅)₂CO₂(CO)₂ and alkynes at 25°C.     

Efficient on-column conversion of IgG1 trisulfide linkages to native disulfides in tandem with Protein A affinity chromatography

Protein trisulfide linkages are generated by the post-translational insertion of a sulfur atom into a disulfide bond. Molecular heterogeneity was detected in a recombinant IgG₁ monoclonal antibody (mAb) and attributed to the presence of a protein trisulfide moiety. The predominant site of trisulfide modification was the bond between the heavy and light chains. The trisulfide was eliminated during purification of the IgG₁ mAb via a cysteine wash step incorporated into Protein A affinity column chromatography. Analysis of the cysteine-treated mAb by electrophoresis and peptide mapping indicated that the trisulfide linkages were efficiently converted to intact disulfide bonds (13% trisulfide decreased consistently to 1% or less) without disulfide scrambling or an increase in free sulfhydryls. The on-column trisulfide conversion caused no change in protein folding detectable by hydrogen/deuterium exchange or differential scanning calorimetry. Consistent with this, binding of the mAb to its antigen in vitro was insensitive to the presence of the trisulfide modification and to its removal by the on-column cysteine treatment. Similar, high efficiency trisulfide conversion was achieved for a second IgG₁ mAb using the column wash strategy (at least 7% trisulfide decreased to 1% or less). Therefore, trisulfide/disulfide heterogeneity can be eliminated from IgG₁ molecules via a convenient and inexpensive procedure compatible with routine Protein A affinity capture.     

Assessment of evolution of loss on ignition matter during heating of iron ores

Ironmaking involves reduction of iron ores to metallic iron using coke, coal or gas as reductants. Although different iron ore reduction processes exist, prior to each reduction type, commonly, the hydroxyl and clay materials present in the iron ores undergo decomposition as a first stage. The mass loss during decomposition of these materials is termed as Loss on Ignition (LOI). The aim of this work is to apply a computer aided thermoanalytical technique to evaluate five different iron ore types during decomposition of the LOI matter and determine associated decomposition temperature ranges and heats of reactions. Fourier Transform Infrared (FTIR) spectroscopy and thermogravimetric analysis (TG) were also incorporated to support the analysis interpretation. Three distinctive temperature ranges of decomposition of iron ore LOI matter were detected. The first region was associated with dehydration of the hygroscopic moisture at a temperature range between 100 and 150 °C. The second region occurred at a temperature range between 260 and 425 °C during which strongly bonded water was released and the OH groups associated with primarily iron oxyhydroxides were fractured. The third range, which occurred at a temperature range of 530 and 605 °C, was related to decomposition of the aluminosilicate clay materials.     

Total synthesis and biochemical characterization of mirror image barnase

In this study we synthesized and characterized mirror image barnase (B. amyloliquefaciens ribonuclease). d-Barnase was identical to l-barnase, when analyzed by liquid chromatography and mass-spectrometry. Proteolysis of the mirror image enzyme revealed that in contrast to its native counterpart, d-barnase was completely stable to digestive proteases. In enzymatic assays, d-barnase had the reciprocal chiral specificity and was fully active towards mirror image substrates. Interestingly, d-barnase also hydrolyzed the substrate of the native chirality, albeit 4000 times less efficiently. This effect was further confirmed by digesting a native 112-mer RNA with the enzyme. Additional studies revealed that barnase accommodates a range of substrates with various chiralities, but the prime requirement for guanosine remains. These studies point toward using mirror image enzymes as modern agents in biotechnology.     

In search of CS2(H2O)(n=1-4) clusters

Gaussian-3 and MP2/aug-cc-pVnZ methods have been used to calculate geometries and thermochemistry of CS(2)(H2O)n, where n=1-4. An extensive molecular dynamics search followed by optimization using these two methods located two dimers, six trimers, six tetramers, and two pentamers. The MP2/aug-cc-pVDZ structure matched best with the experimental result for the CS(2)(H2O) dimer, showing that diffuse functions are necessary to model the interactions found in this complex. For larger CS(2)(H2O)n clusters, the MP2/aug-cc-pVDZ minima are significantly different from the MP2(full)6-31G* structures, revealing that the G3 model chemistry is not suitable for investigation of sulfur containing van der Waals complexes. Based on the MP2/aug-cc-pVTZ free energies, the concentration of saturated water in the atmosphere and the average amount of CS(2) in the atmosphere, the concentrations of these clusters are predicted to be on the order of 10(5) CS(2)(H2O) clusters.cm(-3) and 10(2) CS(2)(H2O)(2) clusters.cm(-3) at 298.15 K. The MP2/aug-cc-pVDZ scaled harmonic and anharmonic frequencies of the most abundant dimer cluster at 298 K are presented, along with the MP2/aug-cc-pVDZ scaled harmonic frequencies for the CS(2)(H(2)O)(n) structures predicted to be present in a low-temperature molecular beam experiment.     

Analysis of perfluorinated carboxylic acids in soils: detection and quantitation issues at low concentrations

Methods were developed for the extraction from soil, identification, confirmation and quantitation by LC/MS/MS of trace levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA) and perfluorodecanoic acid (PFDA). Whereas PFOA, PFNA and PFDA all can be quantitated using the method of standard additions, PFOA also can be quantitated less laboriously using 13C4-PFOA as a matrix internal standard. The impact of extract matrices on signal varied between soils and temporally during analytical runs rendering 13C4-PFOA unsuitable as a matrix internal standard for quantitating perfluorinated carboxylic acids (PFCAs) other than PFOA, which co-elutes with 13C4-PFOA. In fact, for soil extracts, quantitation of PFCAs based on external calibrations proved about as accurate as use of matrix internal standards for target analytes that do not co-elute with the matrix internal standard. Also, 13C4-PFOA should be used carefully as a matrix internal standard for trace levels of PFOA because some 13C4-PFOA standards contain trace impurities of unlabelled PFOA. When the presence of PFCAs in soil extracts is being determined by LC/MS/MS, detection limits are best defined by statistical methods that quantify the significance of contrast between analytical signal and background noise using multiple analyses. Further, when developing a calibration of low concentrations using weighted regression, the central tendency of the calibration line is best fitted using graphical depictions of error. As the MDL for the transition-product quantitation ion is approached in LC/MS/MS, relatively weak signals of transition-product confirmation ions can be used as a rejection criterion by looking for anomalously high values of the ratio of the confirmation to the quantitation ion.