Controlling the morphology of cross beta-sheet assemblies by rational design

Low molecular weight peptidomimetics with simple amphiphilic sequences can help to elucidate the structures of cross beta-sheet assemblies, such as amyloid fibrils. The peptidomimetics described herein comprise a dibenzofuran template, two peptide strands made up of alternating hydrophilic and hydrophobic residues, and carboxyl termini, each of which can be varied to probe the structural requirements for beta-sheet self-assembly processes. The dibenzofuran template positions the strands approximately 10 A apart, allowing corresponding hydrophobic side chains in the strands to pack into a collapsed U-shaped structure. This conformation is stabilized by hydrophobic interactions, not intramolecular hydrogen bonds. Intermolecular stacking of the collapsed peptidomimetics, enabled by intermolecular hydrogen bonding and hydrophobic interactions, affords 25-27 A wide protofilaments having a cross beta-sheet structure. Association of protofilaments, mediated by the dibenzofuran substructures and driven by the hydrophobic effect, affords 50-60 A wide filaments. These widths can be controlled by changing the length of the peptide strands. Further assembly of the filaments into fibrils or ribbons can be controlled by modification of the template, C-terminus, and buffer ion composition.     

Switchable electrical conductivity in a three-dimensional metal–organic framework via reversible ligand n-doping

Redox-active metal–organic frameworks (MOFs) are promising materials for a number of next-generation technologies, and recent work has shown that redox manipulation can dramatically enhance electrical conductivity in MOFs. However, ligand-based strategies for controlling conductivity remain under-developed, particularly those that make use of reversible redox processes. Here we report the first use of ligand n-doping to engender electrical conductivity in a porous 3D MOF, leading to tunable conductivity values that span over six orders of magnitude. Moreover, this work represents the first example of redox switching leading to reversible conductivity changes in a 3D MOF.

Redox-active ligands are used to reversibly tune electrical conductivity in a porous 3D metal–organic framework (MOF).     

Quantum yield of the iodide-iodate chemical actinometer: dependence on wavelength and concentrations

The quantum yield (QY) of the iodide-iodate chemical actinometer (0.6 M KI-0.1 M KIO3) was determined for irradiation between 214 and 330 nm. The photoproduct, triiodide, was determined from the increase in absorbance at 352 nm, which together with a concomitant measurement of the UV fluence enabled the QY to be calculated. The QY at 254 nm was determined to be 0.73 +/- 0.02 when calibration was carried out against a National Institute of Standards and Technology traceable radiometer or photometric device. At wavelengths below 254 nm the QY increased slightly, leveling off at -0.80 +/- 0.05, whereas above 254 nm the QY decreases linearly with wavelength, reaching a value of 0.30 at 284 nm. In addition, the QY was measured at different iodide concentrations. There is a slight decrease in QY going from 0.6 to 0.15 M KI, whereas below 0.15 M KI the QY drops off sharply, decreasing to 0.23 by 0.006 M KI. Calibration of the QY was also done using potassium ferrioxalate actinometry to measure the irradiance. These results showed a 20% reduction in QY between 240 and 280 nm as compared with radiometry. This discrepancy suggests that the QY of the ferrioxalate actinometer in this region of the spectrum needs reexamination.     

Mixed-metal flux synthesis of quaternary RMn2TrxZn20−x compounds with Tr=Al, In

Eighteen new intermetallic compounds RMn₂Tr_xZn_20−x (2<x<7; R=rare-earth metal; Tr=Al, In) were synthesized using low-melting mixtures of (Tr/Zn) as a solvent. Structural refinement using single-crystal X-ray diffraction data shows that the compounds are substituted variants of the cubic CeCr₂Al₂₀-type structure (Fd-3m, Z=8; unit cell parameters vary from a=14.1152(3)Å for YbMn₂Al_5.3Zn_14.7 to a=14.8125(4)Å for SmMn₂In_5.9Zn_14.1). The Zn and Tr elements show site preferences in the indium compounds, but not in the aluminum analogs. The substitution of trielide element for zinc modifies the valence electron count of the compounds to allow for the incorporation of Mn into the structure. Magnetic susceptibility data show no evidence of magnetic ordering down to 3 K.     

Reduction of the pertechnetate anion with bidentate phosphine ligands

The reduction of ammonium pertechnetate with bis(diphenylphosphino)methane (dppm), and with diphenyl-2-pyridyl phosphine (Ph(2)Ppy), has been investigated. The neutral Tc(II) complex, trans-TcCl(2)(dppm)(2) (1), has been isolated from the reaction of (NH(4))[TcO(4)] with excess dppm in refluxing EtOH/HCl. Chemical oxidation with ferricinium hexafluorophosphate results in formation of the cationic Tc(III) analogue, trans-[TcCl(2)(dppm)(2)](PF(6)) (2). The dppm ligands adopt the chelating bonding mode in both complexes, resulting in strained four member metallocycles. With excess PhPpy, the reduction of (NH(4))[TcO(4)] in refluxing EtOH/HCl yields a complex with one chelating Ph(2)Ppy ligand and one unidentate Ph(2)Ppy ligand, mer-TcCl(3)(Ph(2)Ppy-P,N)(Ph(2)Ppy-P) (3). The cationic Tc(III) complexes, trans-[TcCl(2)(Ph(2)P(O)py-N,O)(2)](PF(6)) (4) and trans-[TcCl(2)(dppmO-P,O)(2)](PF(6)) (5) (Ph(2)P(O)py = diphenyl-2-pyridyl phosphine monoxide and dppmO = bis(diphenylphosphino)methane monoxide), have been isolated as byproducts from the reactions of (NH(4))[TcO(4)] with the corresponding phosphine. The products have been characterized in the solid state and in solution via a combination of single-crystal X-ray crystallography and spectroscopic techniques. The solution state spectroscopic results are consistent with the retention of the bonding modes revealed in the crystal structures.     

Brønsted acid catalysis of photosensitized cycloadditions

Catalysis is central to contemporary synthetic chemistry. There has been a recent recognition that the rates of photochemical reactions can be profoundly impacted by the use of Lewis acid catalysts and co-catalysts. Herein, we show that Brønsted acids can also modulate the reactivity of excited-state organic reactions. Brønsted acids dramatically increase the rate of Ru(bpy)₃²⁺-sensitized [2 + 2] photocycloadditions between C-cinnamoyl imidazoles and a range of electron-rich alkene reaction partners. A combination of experimental and computational studies supports a mechanism in which the Brønsted acid co-catalyst accelerates triplet energy transfer from the excited-state [Ru*(bpy)₃]²⁺ chromophore to the Brønsted acid activated C-cinnamoyl imidazole. Computational evidence further suggests the importance of driving force as well as geometrical reorganization, in which the protonation of the imidazole decreases the reorganization penalty during the energy transfer event.

Brønsted acids can catalyze triplet energy transfer reactions, and DFT computations suggest the unexpected importance of reorganization energy for catalysis.     

Diffusion coefficients of the monomer and oligomers in hydroxyethyl methacrylate

The diffusion coefficients are reported of rubbery ternary systems consisting of the polymer, its monomer analogue (i.e., the saturated equivalent of the monomer), and trace quantities of oligomers (dimer, trimer, tetramer and hexamer) for 2‐hydroxyethyl methacrylate (HEMA). These have been obtained with pulsed‐field‐gradient NMR spectroscopy with a polymer weight fraction (f_p) of 0 ≤ f_p ≤ 0.4. The oligomers are macromonomers synthesized with a cobalt catalytic chain‐transfer agent. The diffusion coefficients are about an order of magnitude smaller than those for monomers such as methyl methacrylate; this effect is ascribed to hydrogen bonding in HEMA. The diffusion coefficient D_i of an i‐meric oligomer has been fitted with moderate accuracy by an empirical universal scaling relation, D_i(f_p)/D₁(f_p) ≈ i, previously found to provide an adequate fit to corresponding data for styrene and for methyl and butyl methacrylates. The approximate empirical scaling relation seems to hold for a remarkably wide range of types of monomer/polymer systems. These results are of use in modeling rates and molecular weight distributions in free‐radical polymerization, particularly for termination (which is chain‐length‐dependent and is controlled by the diffusion coefficient of chains of the low degrees of polymerization studied here). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2491–2501, 2003     

Determination of riboflavin in pharmaceutical products by automatic discrete-sample analysis

A procedure for the determination of iron, copper, nickel, cobalt, manganese and chromium down to 0.01 μg g^-1 in sodium calcium silicate glass, sodium borosilicate glass, sodium carbonate and calcium carbonate is described. The analytical procedure depends on the separation at pH 6 of the metal diethyldithiocarbamates into isobutyl methyl ketone, and their determination by flameless atomic absorption spectrometry, with a Massmann-type graphite furnace. The limiting factors on the detection limits attainable are discussed and related to the purity of the acids used for sample solution, sample contamination during chemical separation and the sensitivity of the analytical technique.