Temperature dependence of the iron hyperfine field distribution in amorphous Fe-rich Fe-Zr alloys

The temperature dependence of the iron hyperfine field distribution is reported in melt-quenched amorphous Fe-Zr alloys. The most remarkable feature is the compositinal change in the shape of the average hyperfine field versus temperature curves. The unusual increase in the average hyperfine field below about 85 K is a characteristic feature of the RSG systems; however, no anomaly is observed in the width of the hyperfine field distribution as a function of temperature. The results cannot be properly explained in the framework of the existing spin glass models.     

Mössbauer study of nanodimensional nickel ferrite – mechanochemical synthesis and catalytic properties

Iron–nickel spinel oxide NiFe₂O₄ nanoparticles have been prepared by the combination of chemical precipitation and subsequent mechanical milling. For comparison, their analogue obtained by thermal synthesis is also studied. Phase composition and structural properties of iron–nickel oxides are investigated by X-ray diffraction and Mössbauer spectroscopy. Their catalytic behavior in methanol decomposition to CO and methane is tested. An influence of the preparation method on the reduction and catalytic properties of iron–nickel samples is established.     

Low noise optical receiver with multi-octave bandwidth

Optical and Quantum Electronics - A new approach for the design and construction of low noise broadband optical receivers is presented utilizing distributed amplification based on hybrid integrated...     

Phase transitions in silicon single crystals resulting from directional plastic deformation

The formation of polytypic modifications is observed in dislocation-free silicon single crystals under directional plastic deformation. It is shown that the deformation-stimulated phase appears on the surface of the sample in the form of small grains ranging from several hundred to several thousand angstroms in size. A twin structure in the individual grains is observed. Fiz. Tverd. Tela (St. Petersburg) 40, 746–749 (April 1998)     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

First measurement of the ϱ spectral function in nuclear collisions

The NA60 experiment at the CERN SPS has studied low-mass muon pairs in 158 A GeV In–In collisions. A strong excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size close to 400000 events and the good mass resolution of about 2% made it possible to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum shows some non-trivial centrality dependence, but is largely consistent with a dominant contribution from π⁺π^-→ϱ→μ⁺μ^- annihilation. The associated ϱ spectral function exhibits considerable broadening, but essentially no shift in mass. The p_T-differential mass spectra show the excess to be much stronger at low p_T than at high p_T. The results are compared to theoretical model predictions; they tend to rule out models linking hadron masses directly to the chiral condensate. PACS 25.75.-q; 12.38.Mh; 13.85.Qk     

Minicolumn field sampling--preconcentration of trace zinc from seawater and its laboratory detection by flow injection flame atomic absorption spectrometry.

A simple field sampling-preconcentration method for zinc determination in seawater is described. Seawater was collected in situ by pumping it through a minicolumn packed with a chelating resin (Chelite P) connected to a field flow preconcentration system (FFPS). These packed minicolumns retain the dissolved zinc, and once are loaded with the analyte, they are returned to the laboratory where they are sequentially inserted into a flow injection system for on-line zinc elution with diluted hydrochloric acid and flame atomic absorption spectrometric detection. A factorial design has been used to optimize the FFPS and the flow injection elution process. The proposed method has a linear calibration range from 0.07 to at least 9.4 microg L(-1) of zinc, with a detection limit of 0.02 microg L(-1) and a throughput of 26 samples h(-1). Validation was carried out against certified reference water samples. This procedure has been successfully applied to the determination of Zn in seawater samples from Galicia (Spain).     

Volumetric and refractive properties of binary mixtures containing 1,3-dioxolane and isomeric chlorobutanes

The relation between refractive index deviations and excess volumes for binary mixtures formed by a cyclic ether and a haloalkane has been tested using several methods: refractive index mixing rules and equations of state. Refractive index deviations, excess volumes and molar refractions have been calculated from experimental data of refractive indices and densities at two temperatures 298.15 and 313.15 K. Results obtained have been discussed in terms of intermolecular interactions. Refractive indices were compared with those predicted by several mixing rules. Excess volumes have also been correlated using several cubic equations of state and finally a relation between parameter b from equations of state and molar refraction has been provided.     

Thickness dependence of the magnetic anisotropy of Fe layers separated by Al

Magnetic multilayers of ⁵⁷Fe with nominal thickness, T _nom, between 0.4 and 1.0 nm separated by 3.0 nm Al spacer layers were prepared by alternate deposition of the constituents in high vacuum. The samples were investigated at 4.2 K in external magnetic field. A fraction of Fe atoms corresponding to about 0.3 nm equivalent Fe-thickness was found to mix into the Al spacer. The extremely strong magnetic anisotropy observed for T _nom < 0.8 nm is attributed to Fe layers of approximately two atomic planes thick. The anisotropy decreases considerably after the building up of the third Fe atomic layer starts at T _nom = 0.8 nm, but full saturation was not achieved even for T _nom = 1 nm and 3 T magnetic field applied perpendicularly to the sample plane.     

Algebraic Dirichlet-to-Neumann mapping for linear elasticity problems with extreme contrasts in the coefficients

The convergence of iterative based domain decomposition methods is linked with the absorbing boundary conditions defined on the interface between the sub-domains. For linear elasticity problems, the optimal absorbing boundary conditions are associated with non-local Dirichlet-to-Neumann maps. Most of the methods to approximate these non-local maps are based on a continuous analysis. In this paper, an original algebraic technique based on the computation of local Dirichlet-to-Neumann maps is investigated. Numerical experiments are presented for linear elasticity problems with extreme contrasts in the coefficients.