New generalized topologies on generalized topological spaces due to Cs??sz??r

We introduce new types of sets called $\bigwedge_{\mu}$ -sets and $\bigvee_{\mu}$ -sets and study some of their fundamental properties. We then investigate the topologies obtained from these sets.     

Determination of the gross radioactivity in drinking water of Kahramanmaras, Turkey

A monitoring of radioactivity content was performed in drinking waters collected in Kahramanmaras. Gross alpha and gross beta activities concentration were measured. The values of measured gross alpha and gross beta are compared with recommended WHO (World Health Organisation) and ITS (Institution of Turkish Standards) guideline activity concentration. Obtained results are in good agreement with the values recommended by WHO and ITS guideline activity concentrations for drinking water (except for two values).     

The decay of 187Pt: Comparison of the levels of 187Ir with those of heavier odd mass iridium isotopes

The decay scheme of 2.35 h ¹⁸⁷Pt has been investigated using isotopically separated samples produced by the ISOLDE facility at CERN. A total of 20 excited levels in ¹⁸⁷Ir have been established. For many of these levels, spin, parity and absolute probabilities of depopulating transitions have been determined. The results indicate that the ¹⁸⁷Ir nucleus can be described in terms of a single particle Nilsson model including Coriolis coupling between bands ($\text{3}\text{2}{}^{\mathrm{+}}\text{[402],}\text{1}\text{2}{}^{\mathrm{+}}\text{[400]}$).     

Gas chromatographic-mass spectrometric analysis of essential oils from Pimpinella aurea, Pimpinella corymbosa, Pimpinella peregrina and Pimpinella puberula gathered from Eastern and Southern Turkey

Essential oils from fruits, stems and leaves and roots of Pimpinella aurea DC., P. corymbosa Boiss., P. peregrina L. were analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) techniques. Fruits and aerial parts of P. puberula (DC.) Boiss were also evaluated. A total of 140 different compounds were identified, and significant qualitative and quantitative differences were observed among the samples. In fact, the main constituents of each species were different and only the oils extracted from roots shared the same principal compound, epoxy pseudoisoeugenyl-2-methyl butyrate (26.8-42.8%). The other fractions were dominated by different sesquiterpene compounds although in three of them, P. aurea stem and leaves, P. puberula fruits and P. puberula stems and leaves, monoterpene constituents also appear as main ones.     

Synthesis of highly functionalized BEDT-TTF analogues incorporating 1,4-dithiin rings from 1,8-diketones

Employment of 1,8-diketone ring formation reaction led to the synthesis of tetrathiafulvalene derivatives having diphenyl-1,4-dithiin ring together with dihydroxyl, dimethyl, MEM and diphenylthiophene groups. Spectroelectrochemistry of ET and its fully unsaturated analogue 4 was compared. While both displayed nearly similar behaviours, ET started to precipitate as the second oxidation potential is reached. CV studies indicated that the fully unsaturated 4 and tetraphenyldithiophene 20 have the highest oxidation potentials, while diphenyldithiindimethylthio 16 displayed the lowest oxidation potentials. CV measurements indicated that the combination of dithiin and hydroxyl groups help lowering the oxidation potentials. It is surprising that while the presence of dithiin ring results in higher oxidation potentials, hydroxyl groups lower the potentials. Single crystal structure of 13, having both dithiin and 1,4-dithiepine rings, was examined and it was observed that dithiin and dithiepine rings form angles of 20.52° and 25.65° with the planar TTF core in cis form as both rings bent about their S?S axis to give a boat conformation.     

Tryptamine derived amides with thiazole ring system from Thermoactinomyces strain TA66-2

A moderately thermophilic actinomycete strain, which was identified as Thermoactinomyces strain TA66-2, was isolated from hot-spring water. Fermentation, followed by solvent partition and chromatographic separations, resulted in the isolation of two new and two known molecules. The structures of the new compounds were elucidated as 2-(1-Propionylaminoethyl)thiazole-4-carboxylic acid [2-(1H-indol-3-yl)ethyl]amide and 2-(1-Acetylaminoethyl)thiazole-4-carboxylic acid [2-(1H-indol-3-yl)-ethyl]amide by using spectral methods (1D-, 2D-NMR and LC-ESI-MS).     

Application of full factorial design for the preconcentration of chromium by solid phase extraction with Amberlyst 36 resin

The preconcentration of chromium(III) by solid phase extraction and its determination from aqueous solutions by flame atomic absorption spectrometry (FAAS) is investigated by applying an experimental design. The optimization of the preconcentration variables such as pH of the sample solution, flow rate of the sample solution and concentration of elution solution was carried out using 2³ full factorial design. The most important parameter affecting the preconcentration of chromium is the concentration of eluent. In the established experimental conditions, chromium can be determined with a relative standard deviation of 2.0% (N = 7) for a chromium concentration of 100 μg L⁻¹. The detection limit for chromium was 1 μg L⁻¹ (N = 20). The adsorption capacity of Amberlyst 36 is found to be 90.9 mg g⁻¹ for chromium. Effect of other ions on the procedure was also evaluated. The method was validated by the analysis of certified reference materials (tea leaves GBW 07605 and fish tissue IAEA-407). The method was applied to the determination of chromium in waste water, dam water, carrot, parsley and lettuce. Correspondence: Ali Rehber Türker, Department of Chemistry, Faculty of Science and Arts, Gazi University, TR-06500 Ankara, Turkey     

Ion‐exchanger synthesis using reversible addition‐fragmentation chain transfer polymerization

An ion‐exchanger with polyanionic molecular brushes was synthesized by a “grafting from” route based on “surface‐controlled reversible addition‐fragmentation chain transfer polymerization” (RAFT). The RAFT agent, PhC(S)SMgBr was covalently attached to monodisperse‐porous poly(dihydroxypropyl methacrylate‐co‐ethylene dimethacrylate), poly(DHPM‐co‐EDM) particles 5.8 μm in size. The monomer, 3‐sulfopropyl methacrylate (SPM), was grafted from the surface of poly(DHPM‐co‐EDM) particles with an immobilized chain transfer agent by the proposed RAFT protocol. The degree of polymerization of SPM (i. e. the molecular length of the polyanionic ligand) on the particles was controlled by varying the molar ratio of monomer/RAFT agent. The particles carrying polyanionic molecular brushes with different lengths were tested as packing material in the separation of proteins by ion exchange chromatography. The columns packed with the particles carrying relatively longer polyanionic ligands exhibited higher separation efficiency in the separation of four proteins. Plate heights between 130–200 μm were obtained. The ion‐exchanger having poly‐(SPM) ligand with lower degree of polymerization provided better peak‐resolutions on applying a salt gradient with higher slope. The molecular length and the ion‐exchanger group content of polyionic ligand were adjusted by controlling the degree of polymerization and the grafting density, respectively. This property allowed control of the separation performance of the ion‐exchanger packing.     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001