基于生活实践的工程流体力学启发性教学初探

工程流体力学教学中需要强调理论与实践的有机结合.本文提出基于生活实践案例以问题链形式进行启发性工程流体力学教学.以总流能量方程及水头损失计算教学为例,设计了"自来水水龙头堵住一部分出口后水流喷射的距离和流量如何变化"这一简单生活实践问题,将重要知识点贯穿其中.教学应用效果表明,启发性、开放性的生活实践问题,能够很好地引导学生综合运用理论知识,解决实际问题,同时能够培养学生的生活观察和独立思考能力.     

熔石英表面杂质元素在酸蚀过程中的变化

为了探寻熔石英表面痕量杂质元素种类以及随HF酸蚀刻过程中的变化情况,用质量分数为1%HF酸溶液对熔石英进行长达24,48,72,96 h的静态蚀刻实验。结合飞行时间二次离子质谱（TOF-SIMS）和X射线光电子能谱（XPS）测试分析结果发现,熔石英试片表面的痕量杂质元素主要含有B,F,K,Ca,Na,Al,Zn和Cr元素,其中绝大部分都存在于贝氏层中,在亚表面缺陷层检测到有K,Ca元素。所含有的K,Na杂质元素会与氟硅酸反应生成氟硅酸盐化合物。分析表明,在HF酸蚀刻的过程中一部分杂质元素将被消除,一部分杂质元素和生成氟硅酸盐化合物会随着蚀刻液逐渐从熔石英表面向表面纵深方向扩散并被试片吸附沉积,且随着深度的加深各元素的相对含量逐渐减少。     

基于数字地图的二维电波传播问题仿真

为快速预测二维地理环境下的电磁环境特性,应用二维抛物方程模型对电磁环境进行仿真。为了得到真实有效的地形数据,研究了从GeoTiff中抽取网格点上地理信息的方法,并利用双线性插值法计算了任意位置处的高程值。同时研究了地球表面两点之间计算距离的方法,将该方法的计算结果与GIS软件结果进行对比,验证了该方法的可靠性。在标准大气环境下,利用二维抛物方程模型仿真分析了不同距离处不同高度的电波传播传播因子的变化情况,为预测真实地理环境中的电波传播特性提供了一种有效的方法。     

中子单粒子效应研究现状及进展

回顾了中子单粒子研究的国内外发展情况,介绍了近几年西北核技术研究所在西安脉冲堆开展的低能中子单粒子效应研究进展。比较了稳态与脉冲工况下中子单粒子效应的异同性;分析了含有SRAM结构器件随着特征尺寸的减小,中子单粒子效应敏感性加剧的物理机制。分析认为目前中子单粒子效应已成为小尺寸大规模互补金属氧化物半导体器件的主要中子效应表现;中子辐射效应研究中,除了位移损伤效应以外还必需重视由中子电离造成的中子单粒子效应。     

气相色谱矩形离子阱质谱联用仪的设计与性能

气相色谱离子阱质谱联用仪(GC-ITMS)广泛地应用于药物分析、环境分析、农药检测和食品分析、有机化学品分析、毒品分析以及医学和生物分析等领域。离子阱质谱作为色谱的检测器,决定了色质联用仪的分析性能,包括检出限、分辨率。离子阱质量分析器从传统的双曲型3D离子阱发展到2D线性离子阱,质量歧视效应得到了极大的改善,灵敏度得到了提高。矩形离子阱作为线性离子阱,结构简单,加工和装配容易,因此应用到GCMS系统中将具有非常大的优势。介绍了矩形离子阱质谱仪的设计方案、仪器整机的性能测试、质量分辨和质量歧视效应分析,与Agilent6890组成GCMS联用仪,对实际样品进行了分析。     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

Intra-and Intermolecular Rovibrational States of HCI-H2O and DCI-H2O Dimers from Full-Dimensional and Fully Coupled Quantum Calculations

We report full-dimensional and fully coupled quantum bound-state cal-culations of the J=1 intra-and intermolecular rovibrational states of two isotopologues of ...     

Supramolecular Coordination Cages Based on N-Heterocyclic Carbene-Gold(I) Ligands and Their Precursors: Self-Assembly,Structural Transformation and Guest-Binding Properties

The incorporation of functional groups into the cavity of discrete supramolecular coordination cages (SCCs) will bring unique functions and applications. Here, three dicarboxylate ligands (H₂ L1 Cl, H₂ L2 Cl and H₂ L3 Cl) containing N-heterocyclic carbene (NHC) precursors as linkers were introduced to construct SCCs by combining with two C₃-symmertic (CpZr)₃(μ₃-O)(μ₂-OH)₃ clusters as three-connect vertices, resulted in a series of rugby-like V₂E₃ (V=vertex, E=edge) type homoleptic cages ( SCC-1 , SCC-2 and SCC-3 ). However, V₄E₆-type tetrahedral cages ( SCC-4 and SCC-5 ), incorporating six Au-NHC moieties, were obtained when the corresponding NHC-gold(I) functionalized ligands (H₂ L1 ^Au, H₂ L2 ^Au) were applied. For the first time, we present a trackable CpZr-involved cage to cage conversion to generate a heteroleptic V₂E₃ cage ( SCC-6 ) from two homoleptic cages ( SCC-2 and SCC-5 ) with different geometries of V₂E₃ and V₄E₆. The heteroleptic assembly SCC-6 can also be formed upon a subcomponent displacement strategy. The structural transformation and reassembly processes were detected and monitored by ¹H NMR spectroscopy and electrospray-ionization mass spectrometry. The formation of heteroleptic assembly was further supported by single crystal X-ray diffraction analysis. Moreover, homoleptic cage SCC-2 possesses a trigonal bipyramidal cationic cavity allowing the encapsulation of a series of sulfonate anionic guests.     

Elastic Organic Crystals Based on Barbituric Derivative: Multi-faceted Bending and Flexible Optical Waveguide

Elastic organic single crystals with light-emitting and multi-faceted bending properties are extremely rare. They have potential application in optical materials and have attracted the extensive attention of researchers. In this paper, we reported a structurally simple barbituric derivative DBDT , which was easily crystallized and gained long needle-like crystals (centimeter-scale) in DCM/CH₃OH (v/v=2/8). Upon applying or removing the mechanical force, both the (100) and (040) faces of the needle-like crystal showed reversible bending behaviour, showing the nature of multi-faceted bending. The average hardness (H) and elastic modulus (E) were 0.28±0.01 GPa and 4.56±0.03 GPa for the (040) plane, respectively. Through the analysis of the single crystal data, it could be seen that the van der waals (C−H⋅⋅⋅π and C−H⋅⋅⋅C), H-bond (C−H⋅⋅⋅O) and π⋅⋅⋅π interactions between molecules were responsible for the generation of the crystal elasticity. Interestingly, elastic crystals exhibited optical waveguide characteristics in straight or bent state. The optical loss coefficients measured at 627 nm were 0.7 dBmm⁻¹ (straight state) and 0.9 dBmm⁻¹ (bent state), while the optical loss coefficient (α) were 1.5 dBmm⁻¹ (straight state) and 1.8 dBmm⁻¹ (bent state) at 567 nm. Notably, the elastic organic molecular crystal based on barbituric derivative could be used as the candidate for flexible optical devices.