铁电-铁磁多铁性脉冲形成线特性

对"多铁性"脉冲形成线输出特性进行了研究。利用镍锌铁氧体-钛酸钡陶瓷复合多铁性材料制作了脉冲形成线。在不同的磁回路条件下得到了不同脉冲宽度的电脉冲方波,其中以高磁导率材料组合成的闭合磁回路得到了脉冲宽度约201 ns的方波输出。推算出脉冲形成线的相对介电常数接近2 000,相对磁导率大于1.4。基于有效磁导率的概念,分析了多铁性脉冲形成线几何构型对脉冲输出特性的影响。分析表明:平板状"多铁性脉冲形成线"的有效磁导率不仅取决于平板介质的磁导率,还取决于周围介质的磁导率,因而有效磁导率通常较小,其输出表现出明显的铁电性而只有"弱"的铁磁性;相比之下,同轴结构的"多铁性脉冲形成线"具有更高的有效磁导率,其输出可同时表现出强的铁电性和铁磁性,即更明显的"多铁性"。"多铁性脉冲形成线"有可能在紧凑型脉冲功率系统中获得应用。     

不同形状的光斑触发砷化镓光导开关

为研究使用不同形状光斑触发光导开关对光电导特性的影响,研制了12 mm间隙的半绝缘砷化镓光导开关,在不同的偏置电压下,使用波长为1 064 nm的不同能量的激光触发光导开关并进行了光电导测试。使用了不同形状的光斑(包括面状、线状和点状光斑)触发光导开关并进行了光电导特性的比较,讨论了触发光参数对光导开关特性的影响。对处于开关电极间不同位置的线状光斑触发特性进行了比较,结果显示,本征光电导和非本征光电导情况下光斑位置对光电流的影响正好相反。     

高能X射线源焦斑尺寸的时间分辨诊断

将门控分幅相机与快闪烁晶体结合,构成时间分辨X射线诊断系统,对神龙一号直线感应加速器产生的高能脉冲X射线源焦斑进行了测量,在时间间隔为10 ns的情况下,获得了焦斑尺寸随时间的变化曲线。在此基础上,设计了单像素尺寸为0.78 mm×0.78 mm的LYSO闪烁晶体阵列,并进行了X射线照射晶体阵列发光的初步实验,结果表明该阵列可用于高能X射线源焦斑的时间分辨诊断,并能显著提高成像的空间分辨力。     

碳纳米胶囊中水分子的分子动力学研究

采用分子动力学方法研究了不同温度下碳纳米胶囊中水分子及其氢键的聚集密度分布,讨论了水分子内部键角及其取向规律.计算结果表明,由于碳纳米胶囊的束缚作用,水分子主要聚集在与胶囊形状相似的三个薄层中,随着温度的升高,聚集密度峰均会展宽并向管壁移动.氢键的分布规律与水分子聚集密度类似并对其取向角分布有明显影响.与通常情况不同,在1000K高温时仍存在相当数量的氢键.在3100 K附近,碳纳米胶囊发生破裂,溢出少量水分子后自动愈合.     

W_(20)O_(58)(010)表面氢吸附机理的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,在广义梯度近似下,研究了W_(20)O_(58)晶胞、W_(20)O_(58)(010)表面结构及其氢吸附机理.计算结果表明:W_(20)O_(58)晶体理论带隙宽度为0.8 eV,为间接带隙,具有金属性.W_(20)O_(58)晶体中W—O共振较强,以共价键居多.W_(20)O_(58)(010)表面有WO终止(010)表面和O终止(010)表面,表面结构优化后使得W—O键长和W—O—W键角改变,从而实现表面弛豫.分别计算了H_2分子吸附在WO终止(001)表面和O终止(001)表面的WO-L-O_(1c),WO-V-O_(1c),WO-L-O_(2c),WO-V-O_(2c),O-L-O_(1c)和O-V-O_(1c)六种吸附构型,其中WO-L-O_(1c),WO-V-O_(1c)和WO-L-O_(2c)这三种吸附构型不稳定;而WO-V-O_(2c),O-L-O_(1c)和O-V-O_(1c)这三种吸附构型都很稳定,H_2分子都解离成两个H原子,吸附能均为负值,分别为-1.164,-1.021和-3.11 eV.WO-V-O_(2c)吸附构型的两个H原子分别吸附在O和W原子上;O-L-O_(1c)吸附构型的两个H原子,一个与O原子成键,另一个远离了表面.其中O-V-O_(1c)吸附构型最稳定,两个H原子失去电子,为O原子提供电子.分析其吸附前后的态密度,H的1s轨道电子与O的2p,2s轨道电子相互作用,均形成了一些较强的成键电子峰,两个H原子分别与O_(1c)形成化学键,最终吸附反应生成了一个H_2O分子,同时产生了一个表面氧空位.     

Microstructure and strain films using in-plane grazing analysis of GaN epitaxial incidence x-ray diffraction

This paper investigates the major structural parameters, such as crystal quality and strain state of （001）-oriented GaN thin films grown on sapphire substrates by metalorganic chemical vapour deposition, using an in-plane grazing incidence x-ray diffraction technique. The results are analysed and compared with a complementary out-of-plane x- ray diffraction technique. The twist of the GaN mosaic structure is determined through the direct grazing incidence t of （100） reflection which agrees well with the result obtained by extrapolation method. The method for directly determining the in-plane lattice parameters of the GaN layers is also presented. Combined with the biaxial strain model, it derives the lattice parameters corresponding to fully relaxed GaN films. The GaN epilayers show an increasing residual compressive stress with increasing layer thickness when the two dimensional growth stage is established, reaching to a maximum level of-0.89 GPa.     

Ligand Size Effect on PdLn Oxidative Addition with Aryl Bromide: A DFT Study

采用密度泛函理论的COSMO模型模拟了在DMF溶剂中三种不同体积的钯配体Pd(PR₃)_n (n=1,2) (PR₃=PH₃, PMe₃, PtBu₃)与溴苯氧化加成的反应过程. 对比双配体Pd(PR₃)₂的裂解能以及双配体钯Pd(PR₃)₂和单配体钯Pd(PR₃)氧化加成过程的能垒;结果表明,小体积的配体PH₃和PMe₃是以双配位的形式参加氧化加成过程的,而较大体积的配体PtBu₃是以单配位钯的形式参加氧化加成过程的.     

Shear Thickening Fluids Based on Additives with Different Concentrations and Molecular Chain Lengths

将二氧化硅颗粒和不同分子链长添加剂颗粒分散到聚乙二醇分散介质中制得剪切增稠液样品,研究了添加剂的不同含量和不同分子链长对剪切增稠液流变性能的影响. 对其流变特性的研究表明,随着添加剂含量的增加和分子链长的增长,样品的剪切增稠效应增强明显,并用大粒子簇的形成对增强机理给出了合理的解释.     

Microemulsion-mediated in-situ synthesis and magnetic characterization of polyaniline/Zn<Subscript>0.5</Subscript>Cu<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

Polyaniline/Zn_0.5Cu_0.5Fe₂O₄ nanocomposite was synthesized by a simple, general and inexpensive in-situ polymerization method in w/o microemulsion. The effects of polyaniline coating on the magnetic properties of Zn_0.5Cu_0.5Fe₂O₄ nanoparticles were investigated. The structural, morphological and magnetic properties of as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM) and magnetic measurements. The morphology analysis confirmed that polyaniline was deposited on the porous surface of magnetic Zn_0.5Cu_0.5Fe₂O₄. It was shown that the saturation magnetization and coercivity of Zn_0.5Cu_0.5Fe₂O₄ decreased after polyaniline coating, which can be interpreted by the interparticle dipole–dipole interactions that contributed to magnetic anisotropy and changed the magnetic properties of the nanoparticles. PACS  74.25.Ha; 81.05.-t; 81.05.Lg     

Numerical analysis of spatial evolution of the small signal gain in a chemical oxygen–iodine laser operating without primary buffer gas

A chemical oxygen–iodine laser (COIL) that operates without primary buffer gas has become a new way of facilitating the compact integration of laser systems. To clarify the properties of spatial gain distribution, three-dimensional (3-D) computational fluid dynamics (CFD) technology was used to study the mixing and reactive flow in a COIL nozzle with an interleaving jet configuration in the supersonic section. The results show that the molecular iodine fraction in the secondary flow has a notable effect on the spatial distribution of the small signal gain. The rich iodine condition produces some negative gain regions along the jet trajectory, while the lean iodine condition slows down the development of the gain in the streamwise direction. It is also found that the new configuration of an interleaving jet helps form a reasonable gain field under appropriate operation conditions.