Cytotoxic Podophyllotoxin Type-Lignans from the Steam Bark of <em>Bursera fagaroides </em>var. <em>fagaroides</em>

The hydroalcoholic extract of the steam bark of B. fagaroides var. fagaroides displayed potent cytotoxic activity against four cancer cell lines, namely KB (ED₅₀ = 9.6 × 10^-2 μg/mL), PC-3 (ED₅₀ = 2.5 × 10^-1 μg/mL), MCF-7 (ED₅₀ = 6.6 μg/mL), and HF-6 (ED₅₀ = 7.1 × 10^-3 μg/mL). This extract also showed anti-tumour activity when assayed on mice inoculated with L5178Y lymphoma cells. Bioactivity-directed isolation of this extract, afforded seven podophyllotoxin-type lignans identified as podophyllotoxin (1), β-peltatin-A-methylether (2), 5'-desmethoxy-β-peltatin-A-methylether (3), desmethoxy-yatein (4), desoxypodophyllotoxin (5), burseranin (6), and acetyl podophyllotoxin (7) by 1D and 2DNMR and FAB-MS analyses, and comparison with reported values. All the isolated compounds showed potent cytotoxic activity in the cell lines tested, especially compound 3, which exhibited greater activity than camptothecin and podophyllotoxin against PC-3 (ED₅₀ = 1.0 × 10^-5 μg/mL), and KB (ED₅₀ = 1.0 × 10^-5 μg/mL). This is the first report of the isolation of podophyllotoxin and its acetate in a Bursera species.     

Amperometric biosensor for oxalate determination in urine using sequential injection analysis

An amperometric flow biosensor for oxalate determination in urine samples after enzymatic reaction with oxalate oxidase immobilized on a modified magnetic solid is described. The solid was magnetically retained on the electrode surface of an electrode modified with Fe (III)-tris-(2-thiopyridone) borate placed into a sequential injection system preceding the amperometric detector. The variables involved in the system such as flow rate, aspired volumes (modified magnetic suspension and sample) and reaction coil length were evaluated using a Taguchi parameter design. Under optimal conditions, the calibration curve of oxalate was linear between 3.0-50.0 mg·L^-1, with a limit of detection of 1.0 mg·L^-1. The repeatability for a 30.0 mg·L^-1 oxalate solution was 0.7%. The method was validated by comparing the obtained results to those provided by the spectrophotometric method; no significant differences were observed.     

Microstructural and chemical characterization of nanostructured TiAlSiN coatings with nanoscale resolution

Nanoscale resolution electron microscopy analysis combined with ion beam assisted techniques are presented here, to give answers to full characterization of morphology, growth mode, phase formation, and compositional distribution in nanocomposite TiAlSiN coatings deposited under different energetic conditions. Samples were prepared by magnetron sputtering, and the effects of substrate temperature and bias were investigated. The nanocomposite microstructure was demonstrated by the formation of a face-centered cubic (Ti,Al)N phase, obtained by substitution of Al in the cubic titanium nitride (c-TiN) phase, and an amorphous matrix at the column boundary regions mainly composed of Si, N (and O for the samples with higher oxygen contents). Oxygen impurities, predicted as the principal responsible for the degradation of properties, were identified, particularly in nonbiased samples and confirmed to occupy preferentially nitrogen positions at the column boundaries, being mainly associated to silicon forming oxynitride phases. It has been found that the columnar growth mode is not the most adequate to improve mechanical properties. Only the combination of moderate bias and additional substrate heating was able to reduce the oxygen content and eliminate the columnar microstructure leading to the nanocomposite structure with higher hardness (>30 GPa).     

1H,89Y HMQC and Further NMR Spectroscopic and X‐ray Diffraction Investigations on Yttrium‐Containing Complexes Exhibiting Various Nuclearities

2D ¹H,⁸⁹Y heteronuclear shift correlation through scalar coupling has been applied to the chemical‐shift determination of a set of yttrium complexes with various nuclearities. This method allowed the determination of ⁸⁹Y NMR data in a short period of time. Multinuclear NMR spectroscopy as function of temperature, PGSE NMR‐diffusion experiments, heteronuclear NOE measurements, and X‐ray crystallography were applied to determine the structures of [Y₅(OH)₅(L ‐Val)₄(Ph₂acac)₆] ( 1 ) (Ph₂acac=dibenzoylmethanide, L ‐Val=L ‐valine), [Y( 2 )(OTf)₃] ( 3 ), and [Y₂( 4 )(OTf)₅] ( 5 ) ( 2 : [(S)P{N(Me)N?C(H)Py}₃], 4 : [B{N(Me)N?C(H)Py}₄]^?) in solution and in the solid state. The structures found in the solid state are retained in solution, where averaged structures were observed. NMR diffusion measurements helped us to understand the nuclearity of compounds 3 and 5 in solution. ¹H,¹⁹F HOESY and ¹⁹F,¹⁹F EXSY data revealed that the anions are specifically located in particular regions of space, which nicely correlated with the geometries found in the X‐ray structures.     

Remote stereocontrol by the sulfinyl group. Diels–Alder reaction of cyclopentadiene with substituted (S)-[2-(p-tolylsulfinyl)styrenes and (S)-[2-(p-tolylsulfinyl)phenyl] vinyl ketones

The ability of a homochiral sulfinyl group at the dienophile to act as a remote stereocontrol inductor in the Diels–Alder reaction with cyclopentadiene has been evaluated. High pressure conditions were required for the reactions of (S)-2-(p-tolylsulfinyl)styrenes 3–5 (E-1,2-disubstituted double bond) and 6–8 (1,1-disubstituted double bond). A good facial selectivity and total endo selectivity were attained with 1,1-disubstitued dienophiles, though the 1,2-disubstituted ones afforded poorer results. In contrast, (S)-[2-(p-tolylsulfinyl)phenyl] vinyl ketones 9–11 reacted readily at low temperature (?40 °C) with complete endo selectivity and high facial selectivity in the presence of Yb(OTf)₃ as a chelating reagent of sulfinyl and carbonyl oxygen atoms. Concerning furan reactions, β-trifluoromethyl enone 14 afforded Diels–Alder adducts with high facial selectivity in the presence of the Lewis acid, but β-non-substituted enones 9 and 12 yielded products of furan conjugate addition to the double bond.     

Proline–cyclodextrin conjugates: synthesis and evaluation as catalysts for aldol reaction in water

The synthesis of six conjugates of l-proline and β-cyclodextrin and their evaluation as catalysts of aldol reaction in water are described. The results indicated that the nature of the linker between proline and β-cyclodextrin is important for catalytic activity; the one with the most flexible linker gave the best results. Inhibition experiments showed that the cavity of β-cyclodextrin plays a role in the catalysis. Permethylation of the cyclodextrin hydroxyl groups led to higher conversion rates.     

Transformations of diphenylphosphinothioic acid tertiary amides mediated by directed ortho metallation

ortho-Lithiation of N,N-diisopropyl-P,P-diphenylphosphinothioic amide using n-BuLi in the presence of TMEDA in diethyl ether followed by electrophilic trapping is described as an efficient method for the synthesis of ortho-functionalised derivatives in high yields. The structural modification of the phosphinothioic amide includes C-X (X = P, S, Si, Sn, I) and C-C bond forming reactions with a large variety of electrophiles. Additional applications based on functional group transformations are also reported. They include imine formation, desulfurization and Suzuki cross-coupling reactions on selected compounds.     

Synthesis of the unique angular tricyclic chromone structure proposed for aspergillitine, and its relationship with alkaloid TMC-120B

The synthesis of the tricyclic angular chromone structure originally assigned to aspergillitine is reported. The synthesis was achieved in 11 steps and 15% overall yield from 2,4-dihydroxypropiophenone, through the intermediacy of 2,3-dimethyl-7-hydroxychromen-4-one. Construction of the nitrogen-bearing heterocyclic ring entailed a Stille cross-coupling reaction with n-Bu(3)SnCH(2)CH=CH(2), followed by double bond isomerization, oximation of the chromone carbonyl, and a final microwave-assisted electrocyclization of the thus formed 6π-electron aza-triene system.     

Addressing selectivity criteria in binding equilibria

Chemical systems, in particular those involving biological and environmental backgrounds, develop through selective processes which are determined by multiple equilibria. Several methods that have been developed to assess thermodynamic selectivity in binding equilibria, including the analysis of selectivity coefficients, the use of calculated species distribution diagrams, selectivity diagrams, and conditional stability constants, are reviewed in this paper with reference to examples mainly related to chemical systems of biological and/or environmental concern. Also the concept of binding affinity has been dealt with, since binding selectivity in equilibrium systems relates to the different affinities with which chemical species bind to each other.