Berechnung von mittleren Schwingungsamplituden einiger tetraedrischer Moleküle und Ionen nach der Methode der charakteristischen Schwingungen

Mean amplitudes of vibration of a series of tetrahedralXY ₄ molecules and ions (hydrides, halides, oxides and oxoanions) have been calculated using the “Method of the Characteristic Vibrations” ofA. Müller. The results indicate that this method leads to very good values for most of the investigated species, and especially in the cases of highM _X/M_Y mass ratio.     

Synthesis,characterization and a thermogravimetric study of copper,cobalt and tin mono- and bis-adducts with ethyleneurea,ethylenethiourea and propyleneurea

This paper describes the synthesis, characterization and a thermogravimetric (t.g.) study of 11 adducts of general formula MCl₂·nL (M = Cu, Co and Sn; n = 1 and 2 for Sn, and 2 for Cu and Co; L = ethyleneurea eu, ethylenethiourea etu, and propyleneurea pu). The i.r. results shows that the eu and pu adducts are coordinated through oxygen, whereas for etu nitrogen is the coordination site. The (C=O) or (C=S) trend is: Cu > Co > Sn. The t.g. curves show that the adducts release ligand molecules in a single mass loss step. As regards considering adducts with the same stoichiometry, the observed thermal stability trend is: etu > pu > eu.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Simultaneous spectrophotometric determination of ethinylestradiol and levonorgestrel by partial least squares and principal component regression multivariate calibration

Two spectrophotometric methods for the determination of Ethinylestradiol (ETE) and Levonorgestrel (LEV) by using the multivariate calibration technique of partial least square (PLS) and principal component regression (PCR) are presented. In this study the PLS and PCR are successfully applied to quantify both hormones using the information contained in the absorption spectra of appropriate solutions. In order to do this, a calibration set of standard samples composed of different mixtures of both compounds has been designed. The results found by application of the PLS and PCR methods to the simultaneous determination of mixtures, containing 4–11 μg ml⁻¹ of ETE and 2–23 μg ml⁻¹ of LEV, are reported. Five different oral contraceptives were analyzed and the results were very similar to that obtained by a reference liquid Chromatographic method.     

Corpuscular diagnostics of a hollow-cathode discharge-III. The metal-ions-regime evolution

The variations in time of mass spectra of ions, extracted from the hollow-cathode discharge in the regime of the intensive sputtering of the cathode material were measured. The mass spectrum changes in time conspicuously. From the results of measurements a distinct anisotropy of ion beam is inferred. The discharge turns into a metal-ions regime.The helpful discussions with Dr. J. Musil are gratefully acknowledged.     

Periodic solutions of a nonlinear propagation equation via a fixed point argument

In this work the initial value problem for the equation $$u_t + \beta u_x + yf(u)_x - \delta u_{xxt} = g,\forall x \in R, \forall t \in [0,T],$$ with periodic boundary conditions is interpreted in the sense of periodic distributions and studied via fixed point arguments. Weak solutions exist iff∈C ⁰ (R) andg∈L ^∞(L ²(0,1)). Moreover, regularity inf, g and the initial data implies regularity of solutions.     

Iron(III)-catalyzed Prins-type cyclization using homopropargylic alcohol: a method for the synthesis of 2-alkyl-4-halo-5,6-dihydro-2H-pyrans

[reaction: see text] A new Prins-type cyclization between homopropargylic alcohol and aldehydes in the presence of FeX(3) to obtain 2-alkyl-4-halo-5,6-dihydro-2H-pyrans in good yield is described. Osmium-catalyzed cis dihydroxylation provided direct access to trans-2-alkyl-3-hydroxy-tetrahydro-pyran-4-ones. Anhydrous ferric halides are also shown to be excellent catalysts for the standard Prins cyclization using homoallylic alcohol. Isolation of an intermediate acetal provides substantiation of a proposed mechanism.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.     

Extraction of Am(III) in the presence of lanthanides and yttrium by benzyldimethyldodecylammonium nitrate from acidic nitrate solutions

We have investigated the effect of coextraction of lanthanides and yttrium on the distribution coefficients D_Am in the extraction of americium by benzyldimethyldodecylammonium nitrate (BDMLNNO₃) from nitrate solutions. In the coextraction of lanthanides, the extraction of Am(NO₃)₃ is suppressed, which is markedly manifested in the extraction of light lanthanides (La, Ce, Pr); of the series of lanthanides their extraction is the highest. The effect of nitric acid and the possibility of separation of lanthanides and americium by the application of three-stage multiple extraction is discussed.     

Preparation of trout liver microsomes for iron speciation in P-450 enzymes by AE–FPLC with ICP–(ORS)MS detection

Cytochromes P-450 are members of a superfamily of hemoproteins involved in the oxidative metabolism of various physiological and xenobiotic compounds in eukaryotes and prokaryotes. The multiplicity of this group of enzymes has been widely studied by chromatographic techniques, mainly high-performance liquid chromatography (HPLC). Because these enzymes are membrane-bound proteins, sample preparation for chromatographic separation of P-450 enzymes requires a solubilization step. The sample-preparation procedures are critical, because detergents affect not only the efficiency of protein solubilization but also their further chromatographic resolution. Trout liver microsomes have been taken here as a model sample to investigate iron speciation in cytochrome P-450. Trouts were treated intraperitoneally with -naphthoflavone, a potent inducer of some P-450 enzymes, and a microsomal suspension containing 7.4±0.1 nmol mL^–1 P-450 enzymes was obtained by ultracentrifugation. Lubrol PX was selected as detergent for solubilization, resulting in about 90% solubilization recovery. The solubilized cytochromes P-450 were further separated by AE–FPLC, with UV detection, or coupled to ICP–MS with an octapole reaction system, ICP–(ORS)MS (monitoring Fe signals at masses 54, 56, and 57). A sampling procedure and chromatographic conditions are developed and were successfully applied to iron speciation in trout liver P-450 enzymes. ICP–(ORS)MS detection of P-450 enzymes is Fe-specific and so will give accurate information on the prosthetic group of the protein, which can constitute an advantageous alternative to classical methods for detection of these hemoproteins.