The Effect of the Molecular Size and Shape on the Volume Behavior of Binary Liquid Mixtures. Branched and Cyclic Alkanes in Heptane at 298.15 K

Excess molar volumes V ^E for 40 mixtures of heptane with a liquid alkane and apparent molar volumes in heptane for eight solid alkanes have been obtained at 298.15 K. They include five linear, 30 branched-chain, and 13 cyclic alkanes. Almost all systems exhibit negative V ^E values. For mixtures with open chain alkanes, V ^E increases from C5 to C7 and then decreases. A similar trend is shown by mixtures with cycloalkanes. V ^E values are compared with known H ^E data for mixtures with heptane and tetrachloromethane. Signs and trends of V ^E and H ^E are correlated with the free volume and interactional terms of the Flory theory. The partial molar volumes at infinite dilution in heptane, V°, have also been obtained and discussed together with literature data on other hydrocarbons and polar compounds. The calculated contributions to V° by CH₃, CH₂, CH and C groups are compared with previously determined contributions of polar groups. The lower contributions of the latter groups are explained with the volume contraction caused by dipole-induced dipole interaction. The volume effects associated with branching and cyclization have been evaluated and compared with the corresponding effects on solvation enthalpy. The branching effect, in the order of magnitude of few cm³·mol^?1, and the larger negative values of cyclization volumes, down to ?24 cm³·mol^?1, are discussed in terms of packing and solute–solvent interactions, in analogy to polar organic solutes either in heptane and tetrachloromethane. A negative cyclization effect is also exhibited by the solvation enthalpies.     

MALDI analysis of proteins after extraction from dissolvable ethylene glycol diacrylate cross‐linked polyacrylamide gels

Although the extraction of intact proteins from polyacrylamide gels followed by mass spectrometric molecular mass determination has been shown to be efficient, there is room for alternative approaches. Our study evaluates ethylene glycol diacrylate, a cleavable cross‐linking agent used for a new type of dissolvable gels. It attains an ester linkage that can be hydrolyzed in alkali conditions. The separation performance of the new gel system was tested by 1D and 2D SDS‐PAGE using the outer chloroplast envelope of Pisum sativum as well as a soluble protein fraction of human lymphocytes, respectively. Gel spot staining (CBB), dissolving, and extracting were conducted using a custom‐developed workflow. It includes protein extraction with an ammonia–SDS buffer followed by methanol treatment to remove acrylamide filaments. Necessary purification for MALDI‐TOF analysis was implemented using methanol–chloroform precipitation and perfusion HPLC. Both cleaning procedures were applied to several standard proteins of different molecular weight as well as ‘real’ biological samples (8–75 kDa). The protein amounts, which had to be loaded on the gel to detect a peak in MALDI‐TOF MS, were in the range of 0.1 to 5 μg, and the required amount increased with increasing mass.     

Synthesis of Nanocomposites from Pd0 and a Hyper‐Cross‐Linked Functional Resin Obtained from a Conventional Gel‐Type Precursor

Hyper‐cross‐linked resins stemming from a gel‐type poly‐chloromethylated poly(styrene‐co‐divinylbenzene) resin (GT) have been investigated by a multi‐methodological approach based on elemental analysis, scanning electron microscopy, X‐ray microanalysis, and solvent absorption. The hyper‐cross‐linking of the parent resin was accomplished by Friedel–Crafts alkylation of the phenyl rings of the resins with the chloromethyl groups. This produced a permanent pore system comprising both micropores (<2.0 nm in diameter) and mesopores (2.2 nm). The chloromethyl groups that did not react in the hyper‐cross‐linking step were transformed into methylmercaptan groups and the latter were then converted into sulfonic groups by oxidation with hydrogen peroxide. By this procedure the extensive permanent porosity of the parent unsulfonated hyper‐cross‐linked polymer (HGT) was retained by the sulfonated polymer (HGTS). The final exchange capacity of HGTS was determined to be 0.36 mmol g^?1. HGTS was easily metalated with Pd^II and the subsequent reduction of the metal centers with either aqueous sodium borohydride, formaldehyde, or dihydrogen produced three Pd⁰/HGTS nanocomposites. The metal nanoparticles had diameters in the 1–6 nm range for all the nanocomposites, as determined by TEM, but with somewhat different distributions. When formaldehyde was used, more than 90 % of the nanoparticles were less than 3 nm and their radial distribution throughout the polymer beads was quite homogeneous. These findings show that with this reducing agent the metal nanoparticles are generated within the pore system of the polymer matrix, hence their size is controlled by the dimensions of the pores of the polymeric support.     

Assessment of reproducibility and uncertainty of food microbiology methods: statistical approach of a multi-site laboratory

The validation of food microbiology methods and assessment of measurement uncertainty are required for laboratories operating EN ISO/IEC 17025 accreditation systems. This paper aims to describes the statistical approach adopted by a multi-site laboratory to satisfy these requirements and to routinely check the performance of the methods. A validation protocol was performed, reflecting a great variability of experimental conditions, represented by the period of time during which determinations were made, the different laboratories concerned, the large number of technicians involved, the differences in the level of contamination of the matrix analyzed and the operating conditions (equipment, reagents, culture media, environmental conditions, etc.). Despite the very high variability of the experimental conditions, the values of repeatability and reproducibility obtained for the methods were lower than those stated in the respective regulations. In addition, the top-down approach adopted in this study is to be considered effective overtime and allows to randomize all variable factors, including the effects of sensitivity and specificity, in order to simulate the conditions of real reproducibility. A specific Excel spreadsheet was also developed for the routine expression of analytical results. This spreadsheet represents a very useful tool for operators to calculate and routinely check the results, as well as to assess the uncertainty of measurement. This particular quality assessment system is enabling the multi-site laboratory to implement the accuracy, reliability and comparability of the analytical results and to ensure the analytical control of data output.     

Synthesis of Porphyrin‐Anthraquinone Conjugates as Photosensitizing Agents

A series of 5,10,15,20‐tetraarylporphyrins covalently linked to anthraquinones belonging to the class of emodin were synthesized following two different pathways. The first method exploits the functionalization of the methyl group in position 6 of O‐protected emodins, which can be converted either into a carboxylic acid or into a bromo‐methyl derivative. The modified emodins were then bound through amido or ether bonds to one of the tetraarylporphyrins meso phenyl rings bearing an amino or hydroxyl group, respectively. An alternative synthesis exploits the mixed condensation of triacetoxy‐emodinaldehyde (or trimethoxy‐emodinaldehyde) with pyrrole in the presence of variable amounts of benzaldehyde, thus affording two similar 5‐emodin‐10,15,20‐triphenylporphyrins differing from one another in the emodin hydroxyl group protection. These compounds are characterized by direct conjugation of the emodin moiety to the tetrapyrrolic ring. Preliminary experiments were performed in vitro on the human colon adenocarcinoma cell line HCT116 to evaluate the photocytotoxicity of the new compounds.     

Rigidity results in diffusion Markov triples

We consider stable solutions of semilinear equations in a very general setting. The equation is set on a Polish topological space endowed with a measure and the linear operator is induced by a carré du champs (equivalently, the equation is set in a diffusion Markov triple).Under suitable curvature dimension conditions, we establish that stable solutions with integrable carré du champs are necessarily constant (weaker conditions characterize the structure of the carré du champs and carré du champ itéré).The proofs are based on a geometric Poincaré formula in this setting. From the general theorems established, several previous results are obtained as particular cases and new ones are provided as well.     

Measurement of S-methylcysteine and S-methyl-mercapturic acid in human urine by alkyl-chloroformate extractive derivatization and isotope-dilution gas chromatography-mass spectrometry

S‐methylcysteine (SMC) is a minor amino acid naturally excreted in human urine, a protective agent against oxidative stress and a biotransformation product of the fumigant biocide methyl bromide and of nicotine. A metabolic source of SMC is catabolism of the repair catalytic protein MGMT (EC 2.1.1.37), which specifically removes the methyl group from the modified DNA nucleotide O‐6‐methyl‐guanine to revert the normal GC base pairing. To assess the value of SMC and of S‐methylmercapturic acid (SMMA) as candidate biomarkers of proliferative phenomena, a sensitive analytical method by GC‐MS was applied in a pilot study of healthy subjects to assess their urinary elimination and the intra‐ and inter‐individual variability. Extractive alkylation with butylchloroformate‐n‐butanol‐pyridine (Husek technique) was employed for sample derivatization and isotope dilution GC‐MS with S‐[CD₃]‐SMC and ‐SMMA was applied for specific and sensitive detection. To resolve the target analytes from the main coeluting interferents in the derivatized urine extract a medium‐polarity stationary phase was employed. SMMA was not detected in the morning urine of three healthy fertile‐age women followed for one month above the minimum detectable level of approx. 500 µg/L while SMC concentrations were in the 0.02–0.7 µg/mL range (n = 61) with large inter‐day and inter‐individual variations. In a young healthy male urine samples taken throughout a few days yielded concentrations in the same 90–810 µg/L range (n = 11). These preliminary results points at SMC as a candidate biomarker for the study of methylation turnover in several biochemical processes. Copyright © 2010 John Wiley & Sons, Ltd.