An interactive weighted Tchebycheff procedure for multiple objective programming

The procedure samples the efficient set by computing the nondominated criterion vector that is closest to an ideal criterion vector according to a randomly weighted Tchebycheff metric. Using ‘filtering’ techniques, maximally dispersed representatives of smaller and smaller subsets of the set of nondominated criterion vectors are presented at each iteration. The procedure has the advantage that it can converge to non-extreme final solutions. Especially suitable for multiple objective linear programming, the procedure is also applicable to integer and nonlinear multiple objective programs.     

Polymorphism behavior of poly(ethylene naphthalate)/clay nanocomposites: role of clay surface modification

The influence of clay surface modification on the polymorphism behavior of poly(ethylene naphthalate) (PEN)/clay nanocomposites was investigated via in situ Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction. The results show that untreated clay has a heterogeneous nucleating effect on PEN and favors the beta-crystal form, while the surfactant 1-hexadecyl-2,3-dimethylimidazolium (IMC16) has a plasticization effect and tends to enhance the kinetically favored alpha-phase instead. In contrast, the nanocomposite (PEN/IMC16-MMT) formed from IMC16-treated clay (IMC16-MMT) exhibits a strong temperature-dependent polymorphic behavior, with the beta-phase being more favored at 200 degrees C, but the alpha-phase being preferred instead at 180 degrees C. In situ FTIR spectroscopy of PEN/IMC16-MMT reveals an abrupt change in the concentration of alpha- and beta-"crystalline conformers" between the two temperatures during the induction period of crystallization. This is attributed to the hindered formation of stable nuclei at the organoclay surface. In addition, surfactant degradation gives rise to a highly plasticized polymer/organoclay interface. The combination of the hindered heterogeneous nucleation and plasticization effects gives rise to the unique temperature-dependent polymorphism behavior in PEN/IMC16-MMT.     

Ca2MgWO6 from neutron and X‐ray powder data

The room‐temperature structure of the B‐site‐ordered complex perovskite dicalcium magnesium tungstate, Ca₂MgWO₆, has been determined by simultaneous Rietveld refinement of neutron and X‐ray powder diffraction patterns. Ca₂MgWO₆ is characterized by B‐site ordering and an a⁻a⁻c⁺‐type BO₆ octahedral tilt mechanism.     

Development of a fully buffered molybdate electrolyte for capillary electrophoresis with indirect detection and its use for analysis of anions in Bayer liquor

A new counterion-buffered molybdate electrolyte was developed and optimized for simultaneous quantitative determination of up to eight anions (chloride, sulphate, oxalate, fluoride, formate, malonate, succinate, and acetate) in Bayer liquor by capillary electrophoresis with indirect detection at 214 nm. The separation parameters were optimized in respect to separation of the critical analyte group fluoride-formate-malonate, with the optimal electrolyte prepared from molybdic trioxide containing 5.0 mmol/L MoO3, 1.3 mmol/L cetyltrimethylammonium bromide (CTAB), and buffered with diethanolamine (DEA) to pH 9.2 (ca. 20 mM DEA). Total length of separation capillary was 80 cm, resulting in run time of under 4 min. The method is suitable for a wide concentration range of the analytes (1-50 mg/L) with linear calibration plots (R2 = 0.9983-0.9999). Relative standard deviations were 0.05%-0.07% for migration times and 0.67%-2.04% for peak areas. The detection limits were in the range of 0.17-0.51 mg/L or 2-10 micromol/L (hydrostatic injection of 30 s of 1000 x diluted sample). Due to its good buffering capacity, the electrolyte exhibited an excellent ruggedness and good tolerance to the alkaline samples. Consequently, Bayer liquor samples could be diluted as little as 100 x which allows more sensitive determination of minor components over previous methods. The method was successfully applied to analysis of Bayer liquor samples with recoveries in the range of 95-105%.     

Effect of chlorine on adsorption/ultrafiltration treatment for removing natural organic matter in drinking water

In drinking water treatment, prechlorination is often applied in order to control microorganisms and taste-and-odor-causing materials, which may influence organics removal by adsorption and membrane filtration. Thus, the addition of chlorine into an advanced water treatment process using a hybrid of adsorption and ultrafiltration (UF) was investigated in terms of natural organic matter (NOM) removal and membrane permeability. A comparison between two adsorbents, iron oxide particles (IOP) and powdered activated carbon (PAC), was made to understand the sorption behavior for NOM with and without chlorination. Chlorine modified the properties of dissolved and colloidal NOM in raw water, which brought about lower TOC removal, during IOP/UF. The location of IOPs, whether they were in suspension or in a cake layer, affected NOM removal, depending on the presence of colloidal particles in feedwater. Chlorine also played a role in reducing the size of particulate matter in raw water, which could be in close association with a decline in permeate flux after chlorination.     

Chiral Co(III)(salen)-catalysed hydrolytic kinetic resolution of racemic epoxides in ionic liquids

In the chiral Co(III)(salen)-catalysed HKR of racemic epoxides, in the presence of ionic liquids, Co(II)(salen) complex is oxidised without acetic acid to catalytically active Co(III)(salen) complex during reaction and, moreover, this oxidation state is stabilised against reduction to Co(II) complex which enables the reuse of the recovered catalyst for consecutive reactions without extra reoxidation.     

SERS-based immunoassay using a gold array-embedded gradient microfluidic chip

Here we report the development of a programmable and fully automatic gold array-embedded gradient microfluidic chip that integrates a gradient microfluidic device with gold-patterned microarray wells. This device provides a convenient and reproducible surface-enhanced Raman scattering (SERS)-based immunoassay platform for cancer biomarkers. We used hollow gold nanospheres (HGNs) as SERS agents because of their highly sensitive and reproducible characteristics. The utility of this platform was demonstrated by the quantitative immunoassay of alpha-fetoprotein (AFP) model protein marker. Our proposed SERS-based immunoassay platform has many advantages over other previously reported SERS immunoassay methods. The tedious manual dilution process of repetitive pipetting and inaccurate dilution is eliminated with this process because various concentrations of biomarker are automatically generated by microfluidic gradient generators with N cascade-mixing stages. The total assay time from serial dilution to SERS detection takes less than 60 min because all of the experimental conditions for the formation and detection of immunocomplexes can be automatically controlled inside the exquisitely designed microfluidic channel. Thus, this novel SERS-based microfluidic assay technique is expected to be a powerful clinical tool for fast and sensitive cancer marker detection.     

Unimolecular ligand-initiator dual functional systems (ULIS) for low copper ATRP of vinyl monomers including acrylic/methacrylic acids

A novel approach for ATRP has been developed which enables the polymerization of vinyl monomers including those bearing carboxylic acid groups such as acrylic/methacrylic acid in the free acid form with ppm amounts of copper. The quantity of copper used in the polymerization is comparable to those left in purified polymers obtained by a conventional ATRP process.     

Theoretical molecular structures for partially bonded complexes of trimethylamine with SO2 and SO3: ab initio and density functional theory calculations

The self-consistent reaction field (SCRF) method based on Onsager's reaction field theory is applied to investigate the effect of polar media on molecular structures of complexes of trimethylamime (TMA) with SO_x (x=2,3). The calculated SCRF N–S bond lengths at the MPW1PW91/6-311+G(3df) level are in satisfactory agreement with the experimental N–S bond lengths for the TMA–SO_x upon crystallization. The results are enough to demonstrate the usefulness of the reaction field theory in providing qualitative understanding of the medium effect on the partially bonded system such as TMA–SO_x.     

Microdeformation in Poly-L-lactide and Poly-L-lactide + Hydroxyapatite Nanocomposite Thin Films

In order to gain new insight into failure mechanisms in poly-L-lactide (PLLA) and PLLA + hydroxyapatite nanocomposites, transmission electron microscopy has been used to investigate room temperature microdeformation in electron transparent thin films of these materials subjected to various heat treatments and deformed in tension using the “copper grid” technique. In amorphous PLLA the dominant microdeformation mechanism was crazing. Localized fibrillar deformation zones (DZs) were also observed in semicrystalline films, tending to propagate in regions where the lamellar trajectories were at high angles to the tensile axis. Thus, in spherulitic films, in which the lamellae formed well-defined stacks with approximately straight trajectories at the scale of the spherulite radii, individual DZs were observed to propagate over relatively large distances, as in the amorphous films. On the other hand, films cold crystallized by heating from the glassy state showed more homogeneous lamellar textures. These were associated with a relatively high density of low aspect ratio DZs. Addition of well dispersed nanosized hydroxyapatite (nHA) to the amorphous PLLA films was also found to result in an increase in the craze density, attributed to stress concentrations associated with void formation at the PLLA-particle interfaces during deformation. However, interpretation was less straightforward in cold crystallized PLLA + nHA thin films, owing to a correlation between the lamellar texture and the nHA particles. In this case, both void formation and favorable lamellar orientations may have contributed to initiation of the DZs in the vicinity of the particles. The results are argued to be broadly consistent with previous observations of the behavior of bulk PLLA and PLLA + nHA films with a range of microstructures, in which there was evidence for an improvement in ductility in the presence of the nHA, again attributed to voiding at the PLLA-particle interfaces.