Kinetic study on the homogeneous esterification of acetic acid with isoamyl alcohol

The liquid‐phase esterification of acetic acid and isoamyl alcohol has been studied to develop a kinetic model using a sequential experimental design based on the divergence criterion. Data come from batch reactor experiments, performed in the temperature range of 316–363 K. Discrimination among 36 possible kinetic models, written in terms of activity, mole fractions, and molar densities, is possible through the deviance information criterion, as estimated by a Markov chain Monte Carlo technique. The obtained results indicate a negligible heat of reaction and a clear autocatalytic effect of acetic acid on the esterification rate. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 10–18, 2013     

Structural Diversity from the Transannular Cyclizations of Natural Germacrone and Epoxy Derivatives: A Theoretical–Experimental Study

Treatment of germacrone ( 1 ) with different electrophiles, and of its epoxy derivatives germacrone‐4,5‐epoxide ( 2 ), germacrone‐1,10‐epoxide ( 3 ) and isogermacrone‐4,5‐epoxide ( 4 ) with Brönsted/Lewis acids and Ti^III, gives rise to a great structural diversity. Thus, by using a maximum of two steps, the production of more than 40 compounds corresponding to 14 skeletons is described. Computational calculations rationalizing the structural divergence produced are also described. Finally, since some of the compounds generated are bioactive natural sesquiterpenes, the mechanisms of formation of these substances will provide new insights in their biosynthesis.     

Gadolinium(III)‐Hydroxy Ladders Trapped in Succinate Frameworks with Optimized Magnetocaloric Effect

Two kinds of inorganic gadolinium(III)‐hydroxy “ladders”, [2×n] and [3×n], were successfully trapped in succinate (suc) coordination polymers, [Gd₂(OH)₂(suc)₂(H₂O)]_n ? 2n H₂O ( 1 ) and [Gd₆(OH)₈(suc)₅(H₂O)₂]_n ? 4n H₂O ( 2 ), respectively. Such coordination polymers could be regarded as alternating inorganic–organic hybrid materials with relatively high density. Magnetic and heat capacity studies reveal a large cryogenic magnetocaloric effect (MCE) in both compounds, namely (ΔH=70 kG) 42.8 J kg^?1 K^?1 for complex 1 and 48.0 J kg^?1 K^?1 for complex 2 . The effect of the high density is evident, which gives very large volumetric MCEs up to 120 and 144 mJ cm^?3 K^?1 for complexes 1 and 2 , respectively.     

Synthesis of Densely Functionalised 5‐Halogen‐1,3‐oxazin‐2‐ones by Halogen‐Mediated Regioselective Cyclisation of N‐Cbz‐Protected Propargylic Amines: A Combined Experimental and Theoretical Study

A very efficient synthesis of 5‐halogen‐1,3‐oxazin‐2‐ones has been accomplished by the halocyclisation reaction of chiral nonracemic N‐carbobenzyloxy (N‐Cbz)‐protected propargylic amines by using I₂, Br₂ and Cl₂ as electrophile sources. The nature of the halogen influences the reaction time and yield. However, in all cases the reaction is totally regioselective taking place through a 6‐endo‐dig process regardless of the nature of the halogen and of the substituents in the starting material. To rationalise the experimental results, theoretical studies at the B3LYP/6‐311G* level have been performed.     

Surface Properties of Anatase TiO2 Nanowire Films Grown from a Fluoride‐Containing Solution

Controlling the surface chemistry of nucleating seeds during wet‐chemical synthesis allows for the preparation of morphologically well‐defined nanostructures. Synthesis conditions play a key role in the surface properties, which directly affect the functional properties of the material. Therefore, it is important to establish post‐synthesis treatments to facilitate the optimization of surface properties with respect to a specific application, without losing the morphological peculiarity of the nanostructure. We studied the surface properties of highly crystalline and porous anatase TiO₂ nanowire (NW) electrodes, grown by chemical‐bath deposition in fluoride‐containing solutions, using a combined electrochemical and spectroscopic approach. As‐deposited films showed low capacity for catechol adsorption and a poor photoelectrocatalytic activity for water oxidation. Mild thermal annealing at 200 °C resulted in a significant improvement of the electrode photoelectrocatalytic activity, whereas the bulk properties of the NWs (crystal structure, band‐gap energy) remained unchanged. Enhancement of the functional properties of the material is discussed on the basis of adsorption capacity and electronic properties. The temperature‐induced decrease of recombination centers, along with the concomitant increase of adsorption and reaction sites upon thermal annealing are called to be responsible for such improved performance.     

The influence of structural changes of symmetrical dimers containing two phenyl groups on liquid crystalline behaviour

Some symmetrical dimeric compounds containing biphenyl, biphenylcarboxylic acid or benzoiloxyphenyl moieties and polymethylene spacers were synthesised. The mesogenic properties of the synthesised compounds were investigated by optical microscopy, calorimetric and X-ray methods. It was shown that the location and direction of the ester bonds has a crucial significance in mesophase formation.     

SYNTHESIS,IDENTIFICATION AND SURFACE ACTIVITY OF 2-AMINE-2-DEOXY-3-O-n-OCTYL-D-GLUCOPYRANOSE HYDROCHLORIDE

The synthesis and identification of this product are described. Variations of surface tension of its aqueous solutions versus concentration (ranged between 3 and 95 mmol/L) and temperature (ranged between 20.0 and 47.5°C) are studied.

The isothermal plots of surface tension versus the logarithm of the concentration show a continous decrease, with a sharp change of slope at a concentration about 6.5 mmol/L, for all the studied temperatures. A second change of slope, less pronounced, appears for a higher concentration. This concentration value increases from 28 to 42 mmol/L when temperature is raised from 20.0 to 47.5°C.

The changes of slope can be attributed mainly to micellization of neutral amine molecules resulting from hydrolysis of surface active cations, which present a weak electrolytic character.     

SURFACTANT-OIL-WATER SYSTEMS NEAR THE AFFINITY INVERSION. PART X: EMULSIONS MADE WITH ANIONIC-NONIONIC SURFACTANT MIXTURES.

Anionic and nonionic surfactants exhibit opposite changes in hydrophilicity with a change of temperature. This antagonism can be harnessed by the use of mixtures. The phase behavior and emulsion type are mapped on a temperature water-oil/ratio diagram for different anionic-nonionic mixtures. It is shown that the mixing can result in insensitivity to temperature of different kinds of emulsions.     

Rivality index neighbourhood algorithm with density and distances weighted schemes for the building of robust QSAR classification models with high reliable applicability domain

The rivality index (RI) is a normalized distance measurement between a molecule and their first nearest neighbours providing a robust prediction of the activity of a molecule based on the known activity of their nearest neighbours. Negative values of the RI describe molecules that would be correctly classified by a statistic algorithm and, vice versa, positive values of this index describe those molecules detected as outliers by the classification algorithms. In this paper, we have described a classification algorithm based on the RI and we have proposed four weighted schemes (kernels) for its calculation based on the measuring of different characteristics of the neighbourhood of molecules for each molecule of the dataset at established values of the threshold of neighbours. The results obtained have demonstrated that the proposed classification algorithm, based on the RI, generates more reliable and robust classification models than many of the more used and well-known machine learning algorithms. These results have been validated and corroborated by using 20 balanced and unbalanced benchmark datasets of different sizes and modelability. The classification models generated provide valuable information about the molecules of the dataset, the applicability domain of the models and the reliability of the predictions.