精制煤液化中油加氢裂化制取喷气燃料的研究

在实验室固定床反应装置上,选用Mo-Ni-P/Si-Al工业催化剂,对精煤液化中油进行了加氢裂化制取喷气燃料的实验。考察了反应温度、空速对芳烃加氢转化及产品馏分分布的影响。通过加氢裂化,降低了油品芳烃含量,提高了喷气燃料馏分的收率。在总压为15MPa,反应温度为350—360℃,空速为0.8—1.0h~(-1)条件下,获得了芳烃含量低于10w%的低结晶点的优质喷气燃料产品。并对煤液化中油制取的喷气燃料的组成和性质进行了分析和评价。     

Synthesis and Investigation of Indium Dodecatungstosilicate

Indium dodecatungstosilicate of the composition [In(OH)⋅5H₂O]₂ [SiW₁₂O₄₀]⋅H₂O is synthesized and studied by means of IR spectroscopy, thermogravimetry, and X-ray phase analysis. The crystals of this compound are triclinic, space group P1, a 13.079(3), b 13.795(3), c 13.967(3) Å, α 90.08(3)°, β 103.76(3)°, ψ107.76(3)°, Z 2, and π_calc 4.900 g cm⁻³.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 21–23.Original Russian Text Copyright © 2005 by Kaziev, Dutov, Quinones, Ita, Sychkin.     

Absorption and Capture of Methane into Ionic Liquid

A reversible storage-release process switched by a temperature difference of 10℃around room temperature can be realized. This fast, recyclable, energy efficient, low cost and green system within a wide range of temperature and pressure is reported here for the first time. The system is believed to open up a new route for the storage and homogeneous utilization of methane.     

A simulation of thermal characteristic parameters with an inverse “S” type curve

A synthetical equation is proposed to characterize the essential features of the inverse “S” type curve on the basis of summing-up simulation approach of “S” type curve. The two physical variables in the model obtained are discussed and the detailed method used to determine the parameters is given. The model is then presented to describe the crystallization of poly(caryleher ether ketone) (PEEK) and thermal decomposition of poly(amide-imide) (PAI) respectively. It is found that some thermal characteristic parameters can be well estimated from the model simu-lated in computer.     

Modeling the reaction mechanisms for redox regulation of protein tyrosine phosphatase 1B activity

Protein tyrosine phosphatase 1B (PTP1B) functions by removing the phosphoryl group from tyrosinephosphorylated proteins in insulin signaling and metabolism. The regeneration of the active site involves a sulphenylamide intermediate derived from the intrastrand cross-linking between the catalytic serine and the neighboring backbone nitrogen. Two mechanisms have been proposed for the formation of the sulphenylamide intermediate and the subsequent reactivation of the catalytic site. In the current work, the proposed mechanisms have been investigated by the use of density functional theory calculations. Our results suggest that these two mechanisms have similar overall energy barriers and that the preferred route will be determined by the availability of hydrogen peroxide or other oxidizing reagents.     

Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

二组分混合物的最小流化特性 Ⅰ.混合/分离状态与最小流化空隙率

分析了二组分混合物的３种混合／分离状态及在完全混合时发生连续相转变的极限组成。提出一个判别非等密度体系混合／分离状态的法则与确定混合物空隙率简易可行的随意松散堆积方法。     

Synthesis of quinazolin-4(3H)-ones and 1,2-dihydroquinazolin-4(3H)-ones with the aid of a low-valent titanium reagent

A short and facile synthesis of a series of quinazolin-4(3H)-ones and 1,2-dihydroquinazolin-4(3H)-ones was accomplished in good yields via the novel reductive cyclization of o-nitrobenzamides and triethyl orthoformate, aldehydes or ketones promoted by TiCl₄/Zn.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.