Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Photophysical properties of borondipyrromethene analogues in solution

The photophysical properties of seven new 8-(p-substituted)phenyl analogues of 4,4-difluoro-3,5-dimethyl-8-(aryl)-4-bora-3a,4a-diaza-s-indacene (derivatives of the well-known fluorophore BODIPY) in several solvents have been studied by means of absorption and steady-state and time-resolved fluorimetry. For each compound, the fluorescence quantum yield and lifetime are lower in solvents with higher polarity owing to an increase in the rate of nonradiative deactivation. Increasing the electron withdrawing strength of the p-substituent on the phenyl group in position 8 also leads to lower fluorescence quantum yields and lifetimes. When the p-substituent on the phenyl group in position 8 is a tertiary amine [8-(4-piperidinophenyl), 8-(4-N,N-dimethylaminophenyl), and 8-(4-morpholinophenyl)], the low quantum yields of these compounds in more polar solvents can be rationalized by the inversion of the energy levels of an apolar, highly fluorescent and a polar, nonfluorescent excited state, where charge transfer from the tertiary amine to the BODIPY unit occurs. These amine analogues can be protonated at low pH in aqueous solution. Fluorescence titrations yielded pK(a) values of their conjugate ammonium salts which are in agreement with the electron donating tendency of the amine group: piperidino (4.15) > dimethylamino (2.37) > morpholino (1.47), with the pK(a) values in parentheses. The rate constant of radiative deactivation (k(f)) is the same for all compounds in all solvents studied (k(f) = 1.4 x 10(8) s(-1)).     

Development of reactive thiol-modified monolithic capillaries and in-column surface functionalization by radical addition of a chromatographic ligand for capillary electrochromatography

Reactive thiol-modified capillary columns for capillary electrochromatography (CEC) were developed by transforming the pendent 2,3-epoxypropyl groups of poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) monoliths into 3-mercapto-2-hydroxy-propyl residues by a nucleophilic substitution reaction, employing sodium-hydrogen sulfide as nucleophilic reagent. Conditions for this modification reaction were systematically optimized with respect to different parameters, such as reaction temperature, pH-value, reaction time, type and concentration of organic modifier, and concentration of the sodium-hydrogen sulfide solution. The amount of thiol groups that was generated on the monolith surface was determined directly in the capillaries by a disulfide-exchange reaction employing 2,2'-dipyridyl disulfide (DPDS). This reaction in the capillary liberates pyridine-2-thione in equimolar amount to the surface sulfhydryls, which was collected into a vial and determined photometrically at 343 nm by RP-HPLC. About 17% of the total lateral epoxide moieties of the monolithic substrate could be transformed to reactive sulfhydryl groups, which corresponds to about 0.7 mmol g(-1) monolithic polymer, with a column-to-column repeatability of 3.2% R.S.D. The reactive thiol groups can be utilized to attach any chromatographic ligand with appropriate anchor in a second step, e.g. by radical addition, graft polymerization, nucleophilic substitution, disulfide formation or Michael addition reaction. To demonstrate the feasibility of the concept, we chose an anion exchange type chromatographic ligand based on a quinine derivative, O-9-tert-butylcarbamoylquinine (t-BuCQN) which was attached to the monolith in a radical addition reaction, for a further in-column surface functionalisation. About 78% of the sulfhydryl groups were derivatized with t-BuCQN as determined from differential DPDS assays before and after the selector immobilization reaction. The applicability of these surface-functionalised monolithic capillary columns could be shown by an electrochromatographic separation of the enantiomers of N-3,5-dinitrobenzoyl-leucine, which performed fairly well compared to an analogous capillary that was fabricated by an in situ copolymerization approach.     

The contribution of the pressure drop to analyte retention in coupled column supercritical fluid chromatography of lipids

Summary This paper reports the qualitative and quantitative effects of the column pressure drop on the retention of lipid components in a serially coupled capillary column SFC system. The contribution of the pressure drop consists of two components, the density effect and the flow effect. The magnitude of the flow effect,i. e. the change in retention which results from changes in the flow-rate when column pressures are changed, is determined by the difference in single column analyte k values. The effect will be positive compared with the uncorrected retention values when the column with largest k value is closest to the injector. With the columns in reversed order, the effect will be negative. The contribution from the density effect always resulted in larger coupled column k values and was in most instances of more significance than the flow effect component. Values calculated with and without pressure drop correction have been compared and it has been shown that for most of the eighteen model lipid compounds investigated, the deviations from the experimental retention factors were smaller when pressure drop corrections were made.     

α-Glucosidase synthesis in batch and continuous culture ofSaccharomyces cerevisiae

Glucose prevents maltose utilization bySaccharomyces cerevisiae in batch culture, whereas in a mixed carbohydrate-limited chemostat, maltose and glucose were consumed simultaneously. The specific activity of α-glucosidase was dependent on the dilution rate as well as the proportion of maltose in the mixture. Maximum specific activities in the batch and chemostat cultures on mixtures of maltose and glucose were lower than corresponding values observed on maltose alone.     

Speciation in the aqueous H+/H2VO4-/H2O2/picolinate system relevant to diabetes research

A detailed study of the quaternary aqueous H+/H2VO4-/H2O2/picolinate (Pi-) system has been performed at 25 degrees C in 0.150 M Na(Cl) medium using quantitative 51 V NMR (500 MHz) and potentiometric data (glass electrode). In the ternary H+/H2VO4-/Pi- system, six complexes have been found in the pH region 1-10. In the quaternary H+/H2VO4-/H2O2/Pi- system, eight additional complexes have been found. Generally, equilibria are fast in both systems. The rate of peroxide decomposition depends on the species in solution. Chemical shifts, compositions and formation constants for the species are given. Equilibrium conditions and the fit of the model to the experimental data are illustrated in distribution diagrams. Possible formation of mixed ligand species with imidazole, lactic acid and citric acid have been investigated and ruled out under the same experimental conditions. Structural proposals are given, based on 1)C NMR data and available crystal structures.     

Identification of low molecular vaporizable components in silicone resins using gas chromatography/mass spectrometry

An experimental set-up for the detection of elemental chlorine in chlorinated hydrocarbons (CHCs) is described based on a miniaturized system, which could be used for on-line monitoring of chlorinated compounds. With an optimized time-resolved detection chlorine from CHCs like CCl₄ can be determined by Laser-Induced-Breakdown-Spectroscopy (LIBS) with g/g-detection limits in the gas phase. The application of a miniaturized Nd : YAG laser resulted only in a minor loss in performance, hence it could be used for designing a rugged and small on-line sensor. In addition, preliminary results for the detection of chlorine via the formation of CuCl in the plasma formed by focussing the laser on a copper surface are reported. Utilizing the luminescence of the CuCl D-system at 440 nm, a tenfold improvement in the detection limits was obtained. It appears that the formation of ad hoc selected, small molecules in a laser plasma could be a promising alternative for the selective and sensitive analysis of gaseous chlorinated and other species.     

Bestimmung wasserlöslicher Polyelektrolyte in Polyurethan-Dispersionen

Zusammenfassung Die Bestimmung wasserlöslicher Polyelektrolyte, die bei der Synthese segmentierter Polyurethanionomerer entstehen, erfolgte durch konduktometrische und potentiometrische Titrationsverfahren nach Abtrennung des Serums durch Ultrazentrifugieren oder Ausfrieren des Polymeren bzw. Abtrennung der wasserlöslichen Elektrolyte mit einem gemischten Ionenaustauscher. Diese Elektrolyte enthielten abhängig von der Rezeptur zwischen 25 und 72% der vorgegebenen Ionenkonzentration. Unterstellt man glatte, kugelförmige Latexpartikeln, so beträgt die Fläche pro festhaftende ionische Gruppe nur 60–170 Ų, wodurch eine erhebliche gegenseitige Beeinflussung der Ionen resultiert.Herrn Prof. Dr. Ing. Dr. h.c. mult. H. Zahn zum 65. Geburtstag gewidtmet (O. L.).