2D silver nanocrystal ordering modulated by various substrates and revealed using oxygen plasma treatment

Here, 5 nm Ag nanocrystals are deposited, using the same procedure, on various substrates differing by their rms roughness, wetting properties and nanoparticle-substrate interactions leading, consequently, to different nanocrystal orderings. Theoretical calculations are carried out to understand how these parameters influence the size of the nanocrystal organizations on the substrate surface. When these nanocrystal arrays are subjected to an oxygen plasma treatment, the nanocrystals perfectly assembled in hexagonal networks remain intact, while the nanocrystals that are not well-packed coalesce to form larger particles independently on the used substrate. This phenomenon is observed on the entire substrate surface. This procedure gives an innovative way of using oxygen plasma generated by the reactive ion etching technique, as a new method to reveal defects in 2D Ag nanocrystal self-assemblies.     

A simple copper-catalyzed synthesis of tertiary acyclic amides

The N-arylation of aromatic and aliphatic secondary acyclic amides, known to be poor nucleophiles, has been accomplished using a simple and cheap copper catalytic system. The corresponding tertiary acyclic amides, which can be found in numerous biologically active compounds, have been obtained in good to excellent yields.     

Fluorescent nanocrystals grown in sol–gel thin films for generic stable and sensitive sensors

Through the sol–gel route, we have well-controlled the preparation of fluorescent organic nanocrystals grown in silicate thin films. This process is based on the confined nucleation and growth of dyes in the pores of wet gels. The resulting nanocomposite sol–gel thin films, coated onto low-cost substrates, exhibit coupled properties: transparency, stability, easy shaping of sol–gel thin films and high fluorescence intensity coming from organic nanocrystals. The sensitivity of the fluorescence intensity of nanocrystals to their environments can be exploited for the development of optical sensors. Indeed, Förster Resonance Energy Transfer can inhibit nanocrystal fluorescence when probe molecules are adsorbed or grafted on the nanocrystal surface after their diffusion through the pores of the sol–gel matrix. We investigated by time-resolved fluorescence spectroscopy the effect of nanocrystal size and probe concentration on the fluorescence quenching in presence of Methylene Blue used in this study as molecular probe. As strong fluorescence quenchings can be achieved, even for low probe concentrations, these hybrid organic–inorganic nanocoposites are promising for the development of sensor devices by increasing their fluorescence contrasts under specific chemical or biological environments.     

Isoregic Thienylene‐Phenylene Polymers: The Effects of Structural Variation and Application to Photovoltaic Devices

Isoregic conjugated polymers composed of thiophene and dialkoxybenzene units were designed to harvest incident light in the mid‐visible energy range (band gap of 2.1 eV). Poly(1,4‐bis(2‐thienyl)‐2,5‐diheptoxybenzene) (PBTB(OC₇H₁₅)₂) and poly(1,4‐bis(2‐thienyl)‐2,5‐didodecyloxybenzene) (PBTB(OC₁₂H₂₅)₂) have shown significant photovoltaic performance as an electron donor when used in tandem with the electron acceptor [6, 6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) in bulk hetero‐junction photovoltaic devices. Photovoltaic devices incorporating PBTB(OC₇H₁₅)₂ and PCBM have shown AM1.5 efficiencies of ～0.6% with a short circuit current density of 2.5 mA/cm², an open circuit voltage of 0.74 V, and a fill factor of 0.32. Incident Photon‐to‐Current Efficiency (IPCE) of the device was found to be ca. 16% at 410 nm. In order to examine the relationship between the molecular structure of the polymers and their electronic energy levels, and to correlate this with photovoltaic performance, optoelectronic and electrochemical results are discussed in relation to the I‐V characteristics of the devices. Additionally, a computer‐aided simulation is used to gain further insight into the effect of polymer structure on the energetic relationships in the bulk heterojunction devices.     

Metalation of cyclic pseudopeptidic thiosulfinates with Ni(II) and Zn(II) after ring opening: a mechanistic investigation

Thiosulfinates are an emerging class of oxidized sulfur species that are frequently supposed to be involved in biochemical processes. Reaction of 12- and 10-membered ring pseudopeptidic thiosulfinates 1a (4,4,7,7-tetramethyl-1,3,4,7,8,10-hexahydro-5,6,1,10-benzodithiadiazacyclododecine-2,9-dione 5-oxide) and 1b (3,3,6,6-tetramethyl-1,8-dihydro-4,5,1,8-benzodithiadiazecine-2,7(3H,6H)-dione 4-oxide) with a Ni(II) salt leads after ring cleavage under alkaline conditions to the isolation of diamidato/thiolato/sulfinato complexes. These two thiolato/sulfinato complexes of nickel, which can also be prepared by dioxygen oxidation of the parent diamidato/dithiolato complexes, were characterized by X-ray crystallography. They show a square-planar geometry with a S-bonded sulfinato ligand. A similar reaction between 1b and a Zn(II) salt leads to a thiolato/sulfinato complex with an O-bonded sulfinate via the intermediate formation of a mixed thiolato/sulfinic ester. On the basis of 1H NMR, IR, and mass analyses, the sulfinic ester in the intermediate is proposed to be O-bonded to the zinc center. Then, an in-depth study of the cleavage of these thiosulfinates with the oxyanions RO- and HO- was performed. This led, after trapping of the open species with CH3I, to the identification of three polyfunctionalized products containing a methyl thioether, with either an isothiazolidin-3-one S-oxide, a methyl sulfone, or a methyl sulfinic ester. All of these products arise from a selective nucleophilic attack at the sulfinyl sulfur, promoted either directly by RO- or HO- or by an internal peptidic nitrogen of the thiosulfinate after deprotonation with RO- or HO-.     

Separation of molecular tracers sorbed onto atmospheric particulate matter by flash chromatography

In to order increase sensitivity and to reduce the background induced by matrix effects, a method was developed that uses flash chromatography to separate various compounds present in atmospheric aerosol samples prior to their analysis with different analytical techniques (GC–MS, GC–FID, HPLC). For this purpose, flash chromatography using a 4 g silica gel column crossed by eluent at a flow rate of 20 mL min⁻¹ was used. An eluent with enhanced polarity is needed to separate nonpolar (linear and branched alkanes), semipolar (PAH, nitro-PAH and cholesterol) and polar (methoxyphenols, alkanoic acids, and levoglucosan) compounds. Three combinations of solvents were used: hexane for the nonpolar fraction (F1), toluene/hexane for the semipolar fraction (F2) and dimethylformamide for the polar fraction (F3). The use of different eluents for each fraction allows separation of the sample to be accomplished with good repeatability and satisfying yields [85 ± 5% for F1, 81 ± 8% (PAHs), 89 ± 6% (nitro-PAHs) and 74 ± 7% (cholesterol) for F2 and 79 ± 7% (n-alkanoic acids), 40 ± 11% (methoxyphenols) and 77 ± 6% (levoglucosan) for F3]. The methoxyphenol yields were low due to losses during the concentration/evaporation step. This method was then applied to analyse the organic composition of particles collected at an urban site in Strasbourg (France).     

Synthesis of cyclic mono- and bis-disulfides and their selective conversion to mono- and bis-thiosulfinates

Twelve-membered ring pseudopeptidic cyclic disulfides have been prepared by iodine oxidation of the parent dithiols. However, oxidation of N,N′-(1,2-phenylene)bis(2-mercapto-2-methylpropanamide) afforded a 25/75 mixture of cyclic mono- and bis-disulfides that were separated by selective precipitation in CHCl₃. The cyclic bis-disulfide was selectively prepared by iodine oxidation of the Ni complex of this dithiol and crystallized. Its crystal structure was solved by X-ray diffraction. All these cyclic mono- or bis-disulfides were selectively converted to cyclic mono- and bis-thiosulfinates upon stoichiometric oxidation with dimethyldioxirane at low temperature. ¹H NMR of the cyclic bis-thiosulfinate revealed the presence of four isomers, two couples of stereoisomers, as expected from the insertion of two oxygen atoms in this compound, one on each disulfide bond. The two couples of cis/trans isomers were separated by preparative TLC and identified after alkaline cleavage of the two S(O)-S bonds and metalation with Ni(II). As HO⁻ attack is selective for the sulfinyl sulfur, the nature of the Ni complexes obtained is a signature of each couple of stereoisomers.     

Temperature-sensitive polypeptide brushes-coated mesoporous silica nanoparticles for dual-responsive drug release

A multifunctional nanohybrid based on mesoporous silica nanoparticle and biocompatible polypeptide was fabricated for targeted and dual-responsive therapy of tumor cells.     

Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.