Photoprotective and Antigenotoxic Effects of the Flavonoids Apigenin,Naringenin and Pinocembrin

This work evaluated the photoprotective and antigenotoxic effects against ultraviolet B (UVB) radiation of flavonoid compounds apigenin, naringenin and pinocembrin. The photoprotective efficacy of these compounds was estimated using in vitro photoprotection indices, and the antigenotoxicity against UVB radiation was evaluated using the SOS chromotest and an enzymatic (proteinase K/T4 endonuclease V enzyme) comet assay in UV‐treated Escherichia coli and human (HEK‐293) cells, respectively. Naringenin and pinocembrin showed maximum UV‐absorption peak in UVC and UVB zones, while apigenin showed UV‐absorption capability from UVC to UVA range. These compounds acted as UV filters reducing UV‐induced genotoxicity, both in bacteria and in human cells. The enzymatic comet assay resulted highly sensitive for detection of UVB‐induced DNA damage in HEK‐293 cells. In this work, the photoprotective potential of these flavonoids was widely discussed.     

First Order Derivative Voltammetry on the in situ Surfactant Modified Electrode for Naringin Quantification

Carboxylated multi‐walled carbon nanotubes based glassy carbon electrodes (MWNT‐COOH/GCE) modified in situ with surfactants (sodium dodecyl sulfate (SDS), cetylpyridinium bromide (CPB) and Triton X100) have been tested for the naringin determination. The effect of surfactant nature and concentration on the voltammetric characteristics of naringin has been evaluated. Anionic 100 μM SDS shows the highest 2.7‐fold increase of the oxidation currents in comparison to MWNT‐COOH/GCE. The irreversible electrooxidation of naringin is surface‐controlled process with the one electron and one proton transfer. Under conditions of first order derivative linear sweep voltammetry in Britton‐Robinson buffer (BRB) pH 8.0, the analytical ranges of 0.75–25 and 25–100 μM with the LOD and LOQ of 0.14 and 0.46 μM, respectively, have been obtained. The electrode response is selective in the presence of ascorbic, gallic and p‐coumaric acids as well as quercetin, catechin and rutin. The method has been applied for the naringin quantification in grapefruit juices.     

Electroreduction of CO2 on Au(310)@Cu High-index Facets

The chemical selectivity and faradaic efficiency of high-index Cu facets for the CO₂ reduction reaction (CO₂RR) is investigated. More specifically, shape-controlled nanoparticles enclosed by Cu {hk0} facets are fabricated using Cu multilayer deposition at three distinct layer thicknesses on the surface facets of Au truncated ditetragonal nanoprisms (Au DTPs). Au DTPs are shapes enclosed by 12 high-index {310} facets. Facet angle analysis confirms DTP geometry. Elemental mapping analysis shows Cu surface layers are uniformly distributed on the Au {310} facets of the DTPs. The 7 nm Au@Cu DTPs high-index {hk0} facets exhibit a CH₄ : CO product ratio of almost 10 : 1 compared to a 1 : 1 ratio for the reference 7 nm Au@Cu nanoparticles (NPs). Operando Fourier transform infrared spectroscopy spectra disclose reactive adsorbed *CO as the main intermediate, whereas CO stripping experiments reveal the high-index facets enhance the *CO formation followed by rapid desorption or hydrogenation.     

α‐d‐Glucofuranose and α‐d‐allofuranose diacetonides and silyl ether of α‐d‐glucofuranose diacetonide in dithiophosphorylation reactions

α‐d ‐Glucofuranose and α‐d ‐allofuranose diacetonides react with 2,4‐diorganyl 1,3,2,4‐dithiadiphosphetane‐2,4‐disulfides to form optically active dithiophosphonates in 78–81% yields, which are transformed into the corresponding ammonium salts in 90–97% yields by the treatment of n‐hexadecylamine. The S‐silyldithiophosphonate was prepared in 93% yield by the reaction of 2,4‐bis(butoxyphenyl) 1,3,2,4‐dithiadiphosphetane‐2,4‐disulfide with silyl ether of α‐d ‐glucofuranose diacetonide. One of the salts obtained possesses antibacterial activity against Staphylococcus aureus ATCC 6538‐P.     

Surface site density and utilization of platinum group metal (PGM)-free Fe–NC and FeNi–NC electrocatalysts for the oxygen reduction reaction

Pyrolyzed iron-based platinum group metal (PGM)-free nitrogen-doped single site carbon catalysts (Fe–NC) are possible alternatives to platinum-based carbon catalysts for the oxygen reduction reaction (ORR). Bimetallic PGM-free M₁M₂–NC catalysts and their active sites, however, have been poorly studied to date. The present study explores the active accessible sites of mono- and bimetallic Fe–NC and FeNi–NC catalysts. Combining CO cryo chemisorption, X-ray absorption and ⁵⁷Fe Mössbauer spectroscopy, we evaluate the number and chemical state of metal sites at the surface of the catalysts along with an estimate of their dispersion and utilization. Fe L_3,2-edge X-ray adsorption spectra, Mössbauer spectra and CO desorption all suggested an essentially identical nature of Fe sites in both monometallic Fe–NC and bimetallic FeNi–NC; however, Ni blocks the formation of active sites during the pyrolysis and thus causes a sharp reduction in the accessible metal site density, while with only a minor direct participation as a catalytic site in the final catalyst. We also use the site density utilization factor, ϕ_{SDsurface/bulk}, as a measure of the metal site dispersion in PGM-free ORR catalysts. ϕ_{SDsurface/bulk} enables a quantitative evaluation and comparison of distinct catalyst synthesis routes in terms of their ratio of accessible metal sites. It gives guidance for further optimization of the accessible site density of M–NC catalysts.

The gravimetric surface density and ORR catalytic turnover frequency of Fe–NC and Fe/Ni–NC catalysts were investigated. Both catalysts feature chemically identical Fe sites, but the presence of Ni lowered the gravimetric surface density of Fe sites.     

Voltammetric Determination of Hesperidin on the Electrode Modified with SnO2 Nanoparticles and Surfactants

Highly sensitive voltammetric method for hesperidin determination is developed using glassy carbon electrode modified with SnO₂ nanoparticles (SnO₂ NPs) and surfactants. The highest oxidation currents of hesperidin are observed in the case of cationic 0.50 mM cetylpyridinium bromide (CPB). Parameters of hesperidin electrooxidation have been calculated. Adsorptive anodic differential pulse voltammetry (AdADPV) in phosphate buffer pH 7.0 after 120 s accumulation provides linear dynamic ranges of 0.10–10 and 10–75 μM with the detection limit of 0.077 μM. The selectivity of hesperidin response is proved in the presence of inorganic ions, saccharides, ascorbic acid and other natural phenolics.     

Disilyl dithiophosphonates in the synthesis of open chain and cyclic organothiophosphorus compounds

O-(Trimethylsiloxy)alkyl S-trimethylsilyl aryldithiophosphonates 7a–d were obtained by the reaction of 2,4-diaryl-1,3,2,4-dithiadiphosphetane-2,4-disulfides 5a,b with disilyl derivatives of glycols 6a,c and salicyl alcohol 6b . The reactions of mixed O,S-bis(trimethylsilyl) 2,4-di(3,5-di-tert-butyl-4-hydroxyphenyl)dithiophosphonate 1 and S-silyl aryldithiophosphonates 7a,b with S,S-diethyldithiodiphenylgermane 2 , dichlorodiphenylgermane 8a , and dichlorodiphenylstannane 8b were studied. The structure of hexaphenyl-2,4,6,1,3,5-trithiatrigerminane 11 was established by X-ray single crystal diffraction. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:225–232, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20009     

Synthesis and thermal stability of S‐trimethylsilyl esters of tetracoordinated phosphorus amidothioacids

S‐(Diethylamino)dimethylsilyl bis(diethylamido)dithiophosphate 3 was obtained by the reaction of tetraphosphorus decasulfide 1 with bis(diethylamino)dimethylsilane 2a . The reactions of Lawesson's reagent 5 with 2a and the alkyl homologues of Davy's reagent 8a,b with trimethyl(diethylamino)silane 6 were studied. On the basis of these reactions, methods of synthesizing S‐(diethylamino)dimethylsilyl or S‐(diethylamino)diphenylsilyl 4‐methoxyphenyl (diethylamido)dithiophosphonates 7a and 7b and S‐trimethylsilyl S‐alkyl(diethylamido)trithiophosphates 9a,b are described. The optimal reaction conditions and thermal stability of S‐trimethylsilyl S‐ethyl(diethylamido)trithiophosphate 9a were defined by differential thermal analyses. Compound 9a have been decomposed to form 2,4‐bis(diethylamido)‐1,3,2,4‐dithiadiphosphetane‐2,4‐disulfide 10 which structure was established by X‐ray single crystal diffraction. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:670–675, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20231     

Boron derivatives of dithiophosphoric acids

The reactions of tetraphosphorus decasulfide 1 with trialkyl borates 2a,b and O‐isobutyl diphenylborate 2c were studied. On the basis of these studies, a novel method of synthesizing S‐boron derivatives of dithiophosphoric acids was developed. The use of low frequency ultrasonic irradiation (22 kHz, power 130 W) leads to a reduction in reaction temperature and time required for completion of the reactions studied. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:102–106, 2000