Mass transfer and benzene removal from air using latex rubber tubing and a hollow-fiber membrane module

A dense-phase latex rubber tube and a polyporous propylene hollow-fiber membrane module (HFMM) were investigated for control of benzene-contaminated gas streams. The abiotic mass flux observed through the latex tube was 3.9–13 mg/(min·m²) for 150 ppm of benzene at various gas and liquid flow rates, while a 100-fold lower mass flux was observed in the HFMM. After seeding with an aromatic-degrading culture enriched from activated sludge, the observed removal was 80% of 150 ppm, corresponding toa mass flux of 45 mg/(min·m²). The observed mass flux through the HFMM during biofiltration also rose, to 0.4 mg/(min·m²). Because the HFMM had a 50-fold higher surface area than the latex tube, the observed ben zene removal was 99.8%. Compared to conventional biofilters, the two reactors had modest elimination capacities, 2.5–18 g/(m³·h) in the latex tube membrane bioreactor and 4.8–58 g/(m³·h) in the HFMM. Although the HFMM had a higher elimination capacity, the gas-phase pressure drop was much greater.     

Efficient flow injection and sequential injection methods for spectrophotometric determination of oxybenzone in sunscreens based on reaction with Ni(II)

Spectrophotometric determination of a widely used UV-filter, such as oxybenzone, is proposed. The method is based on the complexation reaction between oxybenzone and Ni(II) in ammoniacal medium. The stoichiometry of the reaction, established by the Job method, was 1:1. Reaction conditions were studied and the experimental parameters were optimized, for both flow injection (FI) and sequential injection (SI) determinations, with comparative purposes. Sunscreen formulations containing oxybenzone were analyzed by the proposed methods and results compared with those obtained by HPLC. Data show that both FI and SI procedures provide accurate and precise results. The ruggedness, sensitivity and LOD are adequate to the analysis requirements. The sample frequency obtained by FI is three-fold higher than that of SI analysis. SI is less reagent-consuming than FI.     

Incorporation of FT-IR spectral data in a computer-assisted prediction of globular protein structure

Currently, much effort is being directed to the determination of the three-dimensional structure of proteins. Two classes of research are of interest; spectrometric techniques which include Fourier transform infrared (FT-IR) spectrometry, and non-spectrometric prediction schemes. The spectra obtained using FT-IR spectrometry, are analyzed to determine the percentages of alpha-helices, beta-pleated sheets, and non-structured coils in a protein. Unfortunately, FT-IR, as well as other spectrometric techniques, cannot be used to determine the exact secondary structure of a protein reliably. Non-spectrometric prediction methods yield information on the exact secondary structure, but are not always accurate. Most prediction methods relate the primary amino acid sequence to the secondary structure of a protein, allowing sequential secondary structure information for the protein examined to be obtained. The goal of this research is to incorporate FT-IR with a prediction method, resulting in an improvement in the accuracy of the prediction.     

Theory of bulk, surface and interface phase transition kinetics in thin films

We report a theoretical study of phase transition kinetics in confined two-dimensional systems, motivated by recent experimental results on the amorphous-to-crystalline transition in supported, thin amorphous water films [E.H.G. Backus, M.L. Grecea, A.W. Kleyn, and M. Bonn, Phys. Rev. Lett. (to be published)]. We generalize and extend existing theories to simultaneously describe the converted (crystalline) fractions in the bulk, at the sample-vacuum surface, and at the sample-support interface as a function of time. The general approach presented here results in expressions for the time-dependent converted bulk, surface, and interface fractions, for arbitrary desorption rate from the thin film, nucleation and growth rates and also includes finite nucleation grain size. The converted bulk, surface, and interface fractions are calculated for nucleation of the new phase occurring (i) in the bulk, (ii) at the support-sample interface, and (iii) at the sample surface (sample-vacuum interface), resulting in nine expressions. The results demonstrate the advantage of monitoring bulk, surface and interface fractions simultaneously to make definite statements regarding the location of the nucleation, and to reliably determine the values of the relevant crystallization parameters.     

Coupling of a Rydberg electron capture ion source with a quadrupole mass filter

The coupling of a Rydberg electron capture ion source with a Nermag R10-10H quadrupole mass filter is described. Details are given of the addition to this instrument of a creation cell for atoms excited in Rydberg states. Within the Nermag ion source, such atoms allow attachment of electrons of well-defined thermal energy. SF(6) was used for optimization of the main experimental parameters (gas pressures and voltages applied to the electrodes). The procedure by which Rydberg electron attachment was confirmed is described. A polychlorobiphenyl compound was used to illustrate the performance of this ionization technique. Ion formation was observed in the absence of fragmentation.     

A new class of heterocyclic betaines: 1,1-dimethyl-3-phenylpyrazolium-5-oxide

1,1-Dimethyl-3-phenylpyrazolium-5-oxide (1) was isolated as a minor product (3%) in the reaction of ethyl benzoylacetate with 1,1-dimethylhydrazine and also was obtained as the major product (58%) from the reaction of methyl p-toluenesulfonate with ethyl benzoylacetate dimethylhydrazone. The structural assignment was made on the basis of chemical reactions and spectral data and the formula is represented by a resonance structure for which there are two principal canonical forms. Reaction of 1 with methanol at room temperature afforded methyl benzoylacetate dimethylhydrazone. Ethyl benzoylacetate dimethylhydrazone was shown to exist as a tautomeric mixture containing 65% of the imine form at room temperature.     

Towards a better understanding of the cisplatin mode of action

We have studied how platinum(II) complexes [Pt(dien)Cl]Cl, [Pt(en)Cl2] and cisplatin react with hybrid molecules that contain sulfur and nitrogen ligands, in particular Phac-Met-linker-p5'dG (Phac = phenylacetyl), Phac-His-linker-p5'dG, Phac-His-Met-linker-p5'dG and Phac-His-Gly-Met-linker-p5'dCATGGCT. The progress of the reactions was monitored by HPLC, and by [1H,15N]-HSQC NMR when 15N-cisplatin was used. The products were isolated and characterised by using enzymatic and chemical reactions and spectroscopic techniques (UV and/or NMR spectroscopy, electrospray or MALDI-TOF mass spectrometry). The combined use of digestion with proteases and reaction with hydrogen peroxide followed by mass spectrometric analysis indicated the platinum coordination positions on the peptide moiety of the largest hybrid. Monofunctional Pt-S adducts were transformed into Pt-N complexes in which Pt-N7 bonds were formed preferentially. Most of the chelates isolated had Pt-S bonds, and, in the case of cisplatin complexes, loss of the ammine trans to sulfur gave rise to the formation of tricoordinate species with platinum-mediated peptide-nucleotide cross-links. 1,2-Intrachain platinum GpG adducts were only obtained in very small amounts (1-4%).     

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Chemistry of the neopolyoxins,pyrimidine and imidazoline nucleoside peptide antibiotics

New chitin synthetase inhibitors, neopolyoxins A, B, and C were isolated from the culture filtrate of Streptomyces cacaoi subsp. asoensis. Their absolute structures have been established on the basis of chemical and spectroscopic evidence. They are structural analogs of the polyoxins. As a nucleobase, neopolyoxin C possesses uracil, while neopolyoxins A and B contain the imidazoline moiety. A ring contraction reaction of pyrimidine nucleoside into imidazoline nucleoside played a key role in the structure determination of the nucleoside moiety. A similar transformation was suggested for the biosynthesis of neopolyoxins A and B.     

On the semimartingale representation of reflecting Brownian motion in a cusp

Summary LetC be the symmetric cusp {(x, y)²:–x yx ,x0} where >1. In this paper we decide whether or not reflecting Brownian motion inC has a semimartingale representation. Here the reflecting Brownian motion has directions of reflection that make constant angles with the unit inward normals to the boundary. Our results carry through for a wide class of asymmetric cusps too.