cis-Enhanced cyclopropanation catalysts: reaction chemistry of three isomers of Rh2[N(C6H5)COCH3]4

The catalytic activities of three structural isomers of Rh₂[N(C₆H₅)COCH₃]₄ in cyclopropanation reactions were surveyed. These studies showed cis cyclopropanation selectivity with bulky alkenes for 2,2-cis- and 2,2-trans-Rh₂[N(C₆H₅)COCH₃]₄.     

Rapid serial analysis of multiple oligonucleotide samples on a microchip using optically-gated injection

Optically-gated injection of fluorescently-labeled DNA has been accomplished for the first time. Rapid, serial analysis of oligonucleotide ladders has been shown on a microchip using this injection technique. Separations of five- and six-component samples have been completed in 60 s or less with a capability to carry out serial injections of these samples every 15 s. The technique has been shown to have better than five base resolution for small oligonucleotides and excellent reproducibility in migration times (< or = 0.75% RSD). Currently, the limit of detection for the system is 0.23 microM. Additionally, multiple unique samples of DNA have been consecutively analyzed in a single separation lane using optical gating. Six consecutive injections of three different samples have been achieved with no sample carryover and a total analysis time of approximately 10 min. These results show the potential of optical gating as an alternative injection technique for high-throughput DNA applications, such as genotyping and monitoring dynamic processes.     

Second-order nonlinear optical properties of the Ag(111)/electrolyte interface in the presence of self-assembled monolayers containing conjugated pi systems. I. Alpha-functionalized terthiophene films on Ag(111)

The nonlinear optical properties of self-assembled monolayers obtained from bonding two different alpha-functionalized terthiophenes (alpha-T3) to (111) silver electrode surfaces have been investigated using second harmonic generation (SHG). The two (alpha-T3) compounds used were functionalized with alkane chains of different lengths (C8 and C4), and each was terminated with a thiol anchoring group. A nitrile group was attached to the terminal thiophene ring of the (alpha-T3) compound with the C4 chain. The orientation of the polarization of the incident beam was changed systematically and gradually between "p" and "s" orientation and the SH signal (isotropic and anisotropic contributions) analyzed in both directions ("P" and "S"). The symmetry of the system was reduced by the presence of the adlayers from C3v to C3. The dependence on the applied potential and the incident wavelength has also been studied. The relative magnitudes and phases of the various second-order tensor elements have been estimated and compared with the values for a bare surface. A resonance process in the (alpha-T3) pi moiety has been investigated, and from this, the effective "band-gap" energies of the organic semiconductor SAMs (i.e., the energy difference between the pi-pi bands) have been estimated.     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

Development of the continuously variable volume reactor for flow injection analysis: Part 1. Design, capabilities and testing

A new apparatus for mixing sample and reagent in flow injection analysis (FIA) is described. The continuously variable volume reactor (CVVR) replaces the conventional mixing coil in a flow injection (FI) manifold to provide mixing and dilution. A linear actuator motor allows control of the chamber volume via LabVIEW software. The chamber volume can be incremented in steps of 1 μl over the range 68-1704 μl. In addition, the chamber has an integral variable-speed stirring unit that is also under computer control. Experiments were performed to evaluate the dispersion characteristics of this new device, evaluate the volume reproducibility, and understand the mixing characteristics. Use of the chamber is shown in the determination of iron(II) in pond water, and in NIST SRM 1643d with excellent results and a detection limit of 3.7 μg/l iron(II). Advantages of the CVVR and future research activities using the device are discussed.     

Snapshots of dioxygen activation by copper: the structure of a 1:1 Cu/O(2) adduct and its use in syntheses of asymmetric Bis(mu-oxo) complexes

The X-ray structure of a 1:1 Cu/O(2) adduct revealed side-on (eta(2)) O(2) coordination. Density functional calculations corroborated the structure, indicated a significant contribution of a Cu(III)-(O(2)(2-)) resonance form, and provided insights into the key bonding interactions. Reaction of a 1:1 adduct supported by a slightly different beta-diketiminate ligand with Cu(I) reagents resulted in the formation of novel asymmetric bis(mu-oxo) complexes that were identified by EPR, UV-vis, and Raman spectroscopy, as well as by an X-ray structure in one instance.     

A new approach to the synthesis of conjugated polymer-nanocrystal composites for heterojunction optoelectronics

We report a simple one pot process for the preparation of lead sulfide (PbS) nanocrystals in the conjugated polymer poly (2-methoxy-5-(2'ethyl-hexyloxy)-p-phenylene vinylene)(MEH-PPV), and we demonstrate electronic coupling between the two components.     

Fluorescence polarization assays in signal transduction discovery

Fluorescence polarization (FP) has become widely employed for high throughput screening used in pharmaceutical drug discovery. Assays of important signal transduction targets are now adapted to FP. In this review we examine assays for cyclic adenosine monophosphate, phosphodiesterases, and protein kinases and phosphatases using FP competitive immunoassays and a direct enzymatic method called IMAP.     

Autonomous intelligent agents for accelerated materials discovery

We present an end-to-end computational system for autonomous materials discovery. The system aims for cost-effective optimization in large, high-dimensional search spaces of materials by adopting a sequential, agent-based approach to deciding which experiments to carry out. In choosing next experiments, agents can make use of past knowledge, surrogate models, logic, thermodynamic or other physical constructs, heuristic rules, and different exploration–exploitation strategies. We show a series of examples for (i) how the discovery campaigns for finding materials satisfying a relative stability objective can be simulated to design new agents, and (ii) how those agents can be deployed in real discovery campaigns to control experiments run externally, such as the cloud-based density functional theory simulations in this work. In a sample set of 16 campaigns covering a range of binary and ternary chemistries including metal oxides, phosphides, sulfides and alloys, this autonomous platform found 383 new stable or nearly stable materials with no intervention by the researchers.

We present an end-to-end computational system for autonomous materials discovery.     

Automatic flow procedure for the determination of ethanol in wine exploiting multicommutation and enzymatic reaction with detection by chemiluminescence

An automatic procedure for the determination of ethanol in wines using a flow system based on multicommutation and enzymatic reaction is described. Alcohol oxidase was immobilized on aminopropyl glass beads and packed in an acrylic column. The peroxide due to enzymatic reaction with ethanol reacted with luminol and generated the chemiluminescence radiation that was monitored by using a laboratory-made detector based on photodiodes. The system manifold comprised a set of 3-way solenoid valves controlled by a microcomputer furnished with electronic interfaces, which ran on software written in Quick BASIC 4.5 to provide facilities to perform on-line sample dilution, reagent addition, and data acquisition. After system parameters optimization, ethanol samples were processed without prior pretreatment. The following suitable features were achieved: linear response ranging from 2.5 to 25% (v/v) ethanol, relative standard deviation of 1.8% (n = 10), detection limit of 0.3% (v/v) ethanol, sampling rate of 23 determinations per hour, and low reagent consumption of 0.23 mg luminol and 7 mg hexacyanoferrate (III) per determination. When the results were compared with those obtained using the AOAC Official Method, no significant difference at the 90% confidence level was observed.