Simulation of a mixed-conducting membrane-based gas turbine power plant for CO<Subscript>2</Subscript> capture: system level analysis of operation stability and individual process unit degradation

A gas turbine power plant for CO₂ capture, based on oxygen-permeable membranes with mixed ionic-electronic conductivity, was analysed with respect to long-term stability by means of numerical simulation. Due to the attractive transport and physicochemical properties of mixed-conducting La₂NiO_4+δ, this nickelate was selected as a prototype membrane material for this application. Experiments showed very slow degradation of La₂NiO_4+δ membranes at oxygen chemical potentials close to atmospheric conditions, which are associated with kinetic demixing and other microstructure-related factors. Interaction with CO₂ in the intermediate temperature range also leads to lower oxygen permeation, whilst increasing oxygen pressure may cause partial phase decomposition and microstructural changes, thus again limiting the range of possible operation conditions. The relevant operational constraints were included in a detailed membrane-based gas turbine power plant model. The membrane performance degradation with time was approximated by a linear function with average rate of 3.3% per 1,000 operation hours. Furthermore, performance deterioration of the gas turbine compressor and turbine were also considered. Simulations revealed that the power plant is substantially affected by degradation of the ceramic membranes and turbomachinery components. The already rather small operating window was further narrowed when compared with a conventional gas turbine power plant. Two different designs of the membrane-based power plant were analysed: (1) with and (2) without additional combustors (afterburners) between the membrane reactor and the gas turbine. Afterburners increase thermal efficiency as well as power output, but also lead to non-negligible CO₂ emissions. In order to have a frame of comparison, results for a conventional gas turbine power plant with degradation of turbomachinery components are also presented. Simulations representing changes in ambient temperature and fuel composition as well as failure incidents were executed to analyse the susceptibility of the gas turbine power plant to external and internal changes.     

Application of an innovative matrix solid-phase dispersion–solid-phase extraction–liquid chromatography–tandem mass spectrometry analytical methodology to the study of the metabolism of the estrogenic mycotoxin zearalenone in rainbow trout liver and muscular tissue

The metabolic fate of the estrogenic mycotoxin zearalenone in rainbow trout is presently unknown. In this study, the tissue concentration of zearalenone and its principal metabolites (α-zearalenol and β-zearalenol) was determined. A known amount of zearalenone was administered as a single bolus to ten fish, and the biological tissue concentration was determined at various times following administration. The analytes were extracted from liver and muscular tissue using an on-line matrix solid-phase dispersion–solid-phase extraction sample preparation protocol, and their concentration determined by HPLC–Turboionspray–tandem mass spectrometry. The results showed that zearalenone is mainly metabolized into α-zearalenol in both liver and muscular tissues. The maximum concentrations of each analyte found in liver were 76.1, 211.2 and 63.7?ng/g respectively for zearalenone, α-zearalenol and β-zearalenol, while in muscular tissue they were 10.7, 8.2 and 6.5?ng/g. These values were reached after 2?h in liver tissue and 12?h in muscular tissue. Moreover the data obtained showed that the elimination rate in liver is quite fast since 48?h after the exposure less than 7% of the maximum concentration found is still present. In muscular tissue, however, about one-third of the maximum concentration found is still present after 48?h.     

Synthesis of highly decorated chiral 2-nitro-cyclohexane carboxylic esters through microwave-assisted organocatalyzed cascade reactions

Starting from (E)-β-substituted-β-nitroacrylates and α,β-unsaturated ketones, a stereoselective organocatalyzed one-pot methodology allowed to synthesize highly decorated chiral 2-nitro-cyclohexane carboxylic esters. The reaction is promoted by Cinchona alkaloid-derived primary amines in the presence of an acidic co-catalyst and affords two diastereoisomers, in good yields and high enantiomeric excess (often higher than 90% ee). By replacing conventional heating with microwave irradiation, cleaner reactions in shortened times (from 48 h to 30 min) were obtained, with improved dr (80:20) and high ee (up to 94%). The application of microwave technology to this organocatalytic methodology allowed also employing C1 substituted enones, leading to cyclohexanones with four contiguous stereocenters in two isomers only, and up to 99% enantioselectivity.     

Ozone-based electrochemical advanced oxidation processes

Novel processes have recently been developed that provide for the enhancement of ozonation through combination with electrochemical treatments. These are processes that can be included among those defined as advanced oxidation processes as they proceed via electrogeneration of highly oxidizing radical species.These processes are generally carried out by sparging ozone in both divided and undivided electrochemical cells in order to promote its decomposition through different mechanisms, depending on the electrode materials adopted, and in some cases still debated.This mini review presents the most recent advances in the field of electrochemically assisted ozonation.In particular, the first section is focused on the process known as electroperoxone (EP) where the ozone decomposition is enhanced by the adoption of carbon-based cathodes, due to the electrogeneration of hydrogen peroxide, while the second section is focused on the process that implies ozonation in a cell adopting metal-based cathodes.     

Electrochemically deposited thiophene-based polymers as protective agents for Prussian Blue thin films

A composite material based on overlapped layers of electrochemically synthesized Prussian Blue (PB) and terthiophene-derived polymer is described, aiming at enhancing the stability of the hexacyanoferrate thanks to the protective action of the polymer. Two bilayer configurations and deposition methods (for the polymer component) were tested. The morphology and electrochemical behavior in organic solvent and in aqueous solutions containing different supporting electrolytes were carried out. The best performances of electrodes modified with films of the composite material as to increased stability of PB were achieved with the potentiostatically deposited polymer covering the PB layer, in acetate buffer at pH 5.5. As for potential cycling stress, the anodic and cathodic peak currents due to PB were not decreased after 20 cycles. Conversely, PB alone displayed the anodic peak currents relevant to PB/Prussian White (PW) and PB/Berlin Green (BG) systems decreased by about 30 %. The stability to local pH increase was assessed by cyclic voltammetry after electrochemical reduction of H₂O₂. For example, the anodic peak currents were decreasing by 15 % and 5 % for the two PB redox systems, while for PB alone the same currents decreased by 35 % and 10 %. The response sensitivity to hydrogen peroxide was improved by 54 %, with respect to PB alone, as evaluated by chronoamperometry.     

Exploring Weak Ligand–Protein Interactions by Long‐Lived NMR States: Improved Contrast in Fragment‐Based Drug Screening

Ligands that have an affinity for protein targets can be screened very effectively by exploiting favorable properties of long‐lived states (LLS) in NMR spectroscopy. In this work, we describe the use of LLS for competitive binding experiments to measure accurate dissociation constants of fragments that bind weakly to the ATP binding site of the N‐terminal ATPase domain of heat shock protein 90 (Hsp90), a therapeutic target for cancer treatment. The LLS approach allows one to characterize ligands with an exceptionally wide range of affinities, since it can be used for ligand concentrations [L] that are several orders of magnitude smaller than the dissociation constants K_D. This property makes the LLS method particularly attractive for the initial steps of fragment‐based drug screening, where small molecular fragments that bind weakly to a target protein must be identified, which is a difficult task for many other biophysical methods.     

Laquinimod Modulates Human Astrocyte Function and Dampens Astrocyte-Induced Neurotoxicity during Inflammation

Astrocytes greatly participate to inflammatory and neurotoxic reactions occurring in neurodegenerative diseases and are valuable pharmacological targets to support neuroprotection. Here we used human astrocytes generated from reprogrammed fibroblasts as a cellular model to study the effect of the compound Laquinimod and its active metabolite de-Laquinimod on astrocyte functions and the astrocyte–neuron interaction. We show that human iAstrocytes expressed the receptor for the inflammatory mediator IL1 and responded to it via nuclear translocation of NFκB, an event that did not occur if cells were treated with Laquinimod, indicating a direct anti-inflammatory activity of the drug on the human astrocyte. Similarly, while exposure to IL1 downregulated glial glutamate transporters GLAST and GLT1, treatment with Laquinimod supported maintenance of physiological levels of these proteins despite the inflammatory milieu. Laquinimod also induced nuclear translocation of the aryl hydrocarbon receptor (AHR), suggesting that drug action was mediated by activation of the AHR pathway. However, the drug was effective despite AHR inhibition via CH223191, indicating that AHR signaling in the astrocyte is dispensable for drug responses. Finally, in vitro experiments with rat spinal neurons showed that laquinimod did not exert neuroprotection directly on the neuron but dampened astrocyte-induced neurodegeneration. Our findings indicate that fibroblast-derived human astrocytes represent a suitable model to study astrocyte–neuron crosstalk and demonstrate indirect, partial neuroprotective efficacy for laquinimod.     

Direct separation of the enantiomers of ramosetron on a chlorinated cellulose‐based chiral stationary phase in hydrophilic interaction liquid chromatography mode

Ramosetron is an enantiopure active pharmaceutical ingredient marketed in Japan since 1996 and later in a few Southeast Asian countries predominantly as an antiemetic for patients receiving chemotherapy. In this study, a simple and rapid high‐performance liquid chromoatography method for the separation of ramosetron and its related enantiomeric impurity by using hydrophilic interaction liquid chromatography mode is presented. Chiral resolution was performed on an analytical column (100 mm × 4.6 mm id) packed with 3 μm particles of cellulose‐based Chiralpak IC‐3 chiral stationary phase. Using a mobile phase containing acetonitrile–water–diethylamine (100:10:0.1, v/v/v) and setting the column temperature at 35°C, the resolution value was 7.35. At a flow rate of 1 mL/min, the enantioseparation was completed within 5 min. The proposed method was partially validated and it has proven to be sensitive with limit of detection and limit of quantitation of the (S)‐enantiomer impurity of 44.5 and 133.6 ng/mL.