Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

6-Pyruvoyl tetrahydropterin synthase assay in extracts of cultured human cells using high-performance liquid chromatography with fluorescence detection of biopterin.

An assay for 6-pyruvoyl tetrahydropterin synthase, the second enzyme in the conversion of guanosine triphosphate into tetrahydrobiopterin, has been developed. Cell extracts were incubated with enzymatically prepared dihydroneopterin triphosphate (80 microM) in the presence of Mg2+ (12 mM), excess sepiapterin reductase (EC 1.1.1.153) (2 nmol/min) and NADPH (2 mM). 6-Pyruvoyl tetrahydropterin, the product of the reaction, was thus converted into tetrahydrobiopterin. After oxidation of the reduced biopterin derivatives in acidic iodine solution, biopterin was enriched and separated from the abundant neopterin phosphates by solid-phase extraction on a strong cation exchanger. Biopterin was then directly eluted on a reversed-phase liquid chromatographic column and detected fluorimetrically using excitation at 353 nm and emission at 438 nm. The biopterin concentrations formed by the coupled enzyme reaction increased linearly with incubation times up to 90 min. The assay allows the quantification of 6-pyruvoyl tetrahydropterin synthase in cultured human cells.     

Beta-diiminate platinum complexes for alkane dehydrogenation

New five-coordinate Pt(IV) complexes [{(o-R2-p-R'-C6H2)NC(R' ')}2CH]PtMe3 (R, R', R' ' = alkyl or H) are reported. The complex with R = Me, R' = tBu, R' ' = Me generates unsaturated Pt(II) species capable of alkane C-H bond activation and stoichiometric dehydrogenation.     

Forward and backward pericyclic photochemical reactions have intermediates in common, yet cyclobutenes break the rules.

Photochemical pericyclic reactions are believed to proceed via a so-called pericyclic minimum on the lowest excited potential surface (S(1)), which is common to both the forward and backward reactions. Such a common intermediate has never been directly detected. The photointerconversion of 1,3-butadiene and cyclobutene is the prevailing prototype for such reactions, yet only diene ring closure proceeds with the stereospecificity that the Woodward-Hoffmann rules predict. This contrast seems to exclude a common intermediate. Using ultrafast spectroscopy, we show that the excited states of two cyclobutene/diene isomeric pairs are linked by not one, but by two common minima, p* and ct*. Starting from the diene side (cyclohepta-1,3-diene and cycloocta-1,3-diene), electrocyclic ring closure passes via the pericyclic minimum p*, whereas ct* is mainly responsible for cis-trans isomerization. Starting from the corresponding cyclobutenes (bicyclo[3.2.0]heptene-6 and bicyclo[4.2.0]octene-7), the forbidden isomer is formed from ct*. The path branches at the first (S(2)/S(1)) conical intersection towards p* and ct*. The fact that the energetically unfavorable ct* path can compete is ascribed to a dynamic effect: the momentum in C=C twist direction, acquired--such as in other olefins--in the Franck-Condon region of the cyclobutenes.     

Mechanism of host-guest complexation by cucurbituril

The factors affecting host-guest complexation between the molecular container compound cucurbit[6]uril (CB6) and various guests in aqueous solution are studied, and a detailed complexation mechanism in the presence of cations is derived. The formation of the supramolecular complex is studied in detail for cyclohexylmethylammonium ion as guest. The kinetics and thermodynamics of complexation is monitored by NMR as a function of temperature, salt concentration, and cation size. The binding constants and the ingression rate constants decrease with increasing salt concentration and cation-binding constant, in agreement with a competitive binding of the ammonium site of the guest and the metal cation with the ureido carbonyl portals of CB6. Studies as a function of guest size indicate that the effective container volume of the CB6 cavity is approximately 105 A(3). It is suggested that larger guests are excluded for two reasons: a high activation barrier for ingression imposed by the tight CB6 portals and a destabilization of the complex due to steric repulsion inside. For example, in the case of the nearly spherical azoalkane homologues 2,3-diazabicyclo[2.2.1]hept-2-ene (DBH, volume ca. 96 A(3)) and 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO, volume ca. 110 A(3)), the former forms the CB6 complex promptly with a sizable binding constant (1300 M(-1)), while the latter does not form a complex even after several months at optimized complexation conditions. Molecular mechanics calculations are performed for several CB6/guest complexes. A qualitative agreement is found between experimental and calculated activation energies for ingression as a function of both guest size and state of protonation. The potential role of constrictive binding by CB6 is discussed.     

Efficient search for all low energy conformations of polypeptides by Monte Carlo methods

The Metropolis Monte Carlo method has been added to the program FANTOM for energy refinement of polypeptides and proteins using a Newton–Raphson minimizer in torsion angle space. With this extension, different strategies for global minimization of the semiempirical energy function ECEPP/2 by various temperature schedules and restriction of conformational space were tested for locating local minimum conformations with low energy of the pentapeptide Met-enkephalin. In total, 1881 conformations below ?10 kcal/mol were found. These conformations could be represented by 77 nonidentical conformations which were analysed for their pattern of hydrogen bonds, types of tight turn, pairwise root-mean-square-deviation (rmsd), Zimmermann codes and side chain conformations. All low energy conformations below ?10.4 kcal/mol show strong similarity to the global minimum conformation in the backbone structure.     

α,ω-Diisocyanatocarbodiimides, -Polycarbodiimides,and Their Derivatives

Research in the field of low-molecular weight, oligomeric and polymeric α,ω-diisocyanatocarbodiimides and -polycarbodiimides has been fruitful, not only in connection with these compounds themselves, but also—as so often happens in chemistry—with quite different problems. Novel synthetic methods, discoveries concerning the properties of low-molecular weight carbodiimides and phosphane imide derivatives, as well as results on the fragmentation reactions of four-membered heterocyclic compounds containing oxygen, phosphorus, and nitrogen, and a better understanding of the diisocyanate polyaddition process are among the many by-products of this research. The “high- and low-temperature formation” of polycarbodiimides and the homogeneous and heterogeneous catalysis of this process are described, and the fundamental importance of four-membered ring fragmentation mechanisms resulting in the formation of phosphane imide derivatives is outlined. Interesting building blocks for the diisocyanate polyaddition and polycondensation processes can be synthesized by many derivatization reactions of oligomeric and high-molecular weight polycarbodiimides and polyuretonimines. The in situ production of polycarbodiimides via matrix reactions in flexible polyurethane foams leads to a cellular arrangement of the material due to the pronounced symmetrical growth processes. Combination-foams with increased carbonation tendencies are formed in this way. Attention is drawn to several industrial applications of α,ω-diisocyanatopolycarbodiimides, of high-molecular weight cross-linked polyuretonimines, and of polycarbodiimide foams.     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

Die gasförmigen Komplexe NiAl2Cl8 und NiAl3Cl11

Gaseous Complexes NiAl₂Cl₈ and NiAl₃Cl₁₁ Spectral photometric measurements of equilibria which are established by reaction of solid NiCl₂ with gaseous Al₂Cl₆ have been made. Results see ?Inhaltsübersicht”?.     

Cyclotetrasilazane als precursor für cyclotrisilazane und bis(cyclodisilazan-1-yl)silane

Di-lithiated octamethylcyclotetrasilazane (OMCTS, 1) reacts with halosilanes in different ways. Ring contraction with formation of the isomeric cyclodisilazanes 2, 3 occurs in the reaction with chloro- and fluorotrimethylsilanes. Substitution (6) and ring contraction with formation of the isomeric six-membered ring 7 occurs with chlorodimethylsilane. 2, 3, 6 and 7 are excellent precursors of silyl-bridged, SiH-functional, four-membered ring systems (4, 5, 9–11). The mechanism of the isomerization reactions are discussed.