Investigation of anthropic effects connected with metal ions concentration, organic matter and grain size in Bormida river sediments

An investigation on the sediment composition and grain size was carried out along the Bormida river (Piedmont, Northern Italy). The samples were taken both in the riverbed and on its banks. Multivariate statistical exploratory methods permitted to identify possible sources of primary pollution. In particular, principal component analysis (PCA) showed that there are probably at least three anthropogenic main causes of pollution, one connected with Cr, Ni and Sn, the second with cadmium and the last one with mercury. Some correlations were found between heavy metal ion concentrations and organic matter and/or the sediment grain size. Differences between the samples collected in the riverbed and on the banks were identified and the relationships between the principal components and the distance of the samples from the riverbed and from the hot spot represented by the ACNA industrial site were also analyzed.     

Evaluation of two commercial capillary columns for the enantioselective gas chromatographic separation of organophosphorus pesticides

The separation of the enantiomers of 13 organophosphorus pesticides (OPPs) has been investigated by gas chromatography (GC) with flame ionisation detection (FID) using two different commercially available chiral columns, Chirasil-Val (l-valine-tert-butylamide) and CP-Chirasil-Dex CB (heptakis (2,3,6-tri-O-metil)-β-cyclodextrin). Using the Chirasil-Val column no chiral resolution was obtained for the OPPs investigated under any tested experimental condition. The use of the CP-Chirasil-Dex CB stationary phase enabled good individual enantiomeric separation of two OPPs, ruelene and trichlorfon and partial separation of naled, chloretoxyphos, isophenphos and metamidophos. Also, the obtained chromatographic results showed that Chirasil-Dex could resolve enantiomers through the combination of different mechanism (e.g. formation of inclusion complexes and/or interactions outside the cyclodextrin cavity).

Under optimised conditions, precision, linearity range and detection limits were evaluated for the enantiomers of ruelene and trichlorfon using CP-Chirasil-Dex CB column and electron capture detection (ECD). By using the GC-ECD method the enantiomers of these OPPs could be satisfactorily detected at very low concentration levels. The detection limits observed were 1.5 ng mL⁻¹ and 11.5 ng mL⁻¹ for the enantiomers of trichlorfon and ruelene, respectively.     

Unexpected Behavior of Diastereomeric Ions in the GasPhase: A Stimulus for Pondering on ee Measurements by ESI-MS

The most common protocols for the quantitative determination of the enantiomeric excess (ee) of raw mixtures by ESI-MS reveal inadequate in cases where the distribution of diastereomeric derivatives diverges from the ee of original solutions. This phenomenon is attributable to a matrix effect, i.e., to the stereospecific formation of high order noncovalent adducts in the ESI droplets, which alters the actual availability of the diastereomeric species under MS analysis. In this frame, the assumption of classic protocols that the ionization correction factor q is independent on the composition of the mixture submitted to analysis is questionable. An alternative methodology is presented in this paper, which is aimed at circumventing the problem by excluding any chemical derivatization of the original raw mixture. It is based on the measurement of the actual distribution of ESI-formed proton-bound diastereomeric complexes from the enantiomeric mixture through a careful analysis of their reaction kinetics with a suitable reactant.      

Alkoxyamine-cyanoborane adducts: efficient cyanoborane transfer agents

We report the synthesis of the hitherto unknown zwitterionic alkoxyamino cyanoboranes by reduction of O-alkyloximes with sodium cyanoborohydride; unprecedented cyanoboronated N-alkoxyformamidines were also isolated as by-products. Boronated alkoxyamines were found to be efficient cyanoborane transfer agents towards more basic amines, including aminosugars; they were also successfully transformed into neoglycoconjugates by the neoglycorandomization reaction with reducing sugars.     

Naked five-coordinate Fe(III)(NO) porphyrin complexes: vibrational and reactivity features

Model ferric heme nitrosyl complexes, [Fe(TPP)(NO)](+) and [Fe(TPFPP)(NO)](+), where TPP is the dianion of 5,10,15,20-tetrakis-phenyl-porphyrin and TPFPP is the dianion of 5,10,15,20-tetrakis-pentafluorophenyl-porphyrin, have been obtained as isolated species by the gas phase reaction of NO with [Fe(III)(TPP)](+) and [Fe(III) (TPFPP)](+) ions delivered in the gas phase by electrospray ionization, respectively. The so-formed nitrosyl complexes have been characterized by vibrational spectroscopy also exploiting (15)N-isotope substitution in the NO ligand. The characteristic NO stretching frequency is observed at 1825 and 1859 cm(-1) for [Fe(III)(TPP)(NO)](+) and [Fe(III)(TPFPP)(NO)](+) ions, respectively, providing reference values for genuine five-coordinate Fe(III)(NO) porphyrin complexes differing only for the presence of either phenyl or pentafluorophenyl substituents on the meso positions of the porphyrin ligand. The vibrational assignment is aided by hybrid density functional theory (DFT) calculations of geometry and electronic structure and frequency analysis which clearly support a singlet spin electronic state for both [Fe(TPP)(NO)](+) and [Fe(TPFPP)(NO)](+) complexes. Both TD-DFT and CASSCF calculations suggest that the singlet ground state is best described as Fe(II)(NO(+)) and that the open-shell AFC bonding scheme contribute for a high-energy excited state. The kinetics of the NO addition reaction in the gas phase are faster for [Fe(III)(TPFPP)](+) ions by a relatively small factor, though highly reliable because of a direct comparative evaluation. The study was aimed at gaining vibrational and reactivity data on five-coordinate Fe(III)(NO) porphyrin complexes, typically transient species in solution, ultimately to provide insights into the nature of the Fe(NO) interaction in heme proteins.     

Design and characterization of bi-soft segmented polyurethane microparticles for biomedical application

Bi-soft segmented poly(ester urethane urea) microparticles were prepared and characterized aiming a biomedical application. Two different formulations were developed, using poly(propylene glycol), tolylene 2,4-diisocyanate terminated pre-polymer (TDI) and poly(propylene oxide)-based tri-isocyanated terminated pre-polymer (TI). A second soft segment was included due to poly(?-caprolactone) diol (PCL). Infrared spectroscopy, used to study the polymeric structure, namely its H-bonding properties, revealed a slightly higher degree of phase separation in TDI-microparticles. TI-microparticles presented slower rate of hydrolytic degradation, and, accordingly, fairly low toxic effect against macrophages. These new formulations are good candidates as non-biodegradable biomedical systems.     

Dynamics by solid-state NMR: detailed study of ibuprofen Na salt and comparison with ibuprofen

The various internal rotations and interconformational jumps of the Na-salt form of ibuprofen in the solid state were characterized in detail by means of the simultaneous analysis of a variety of low- and high-resolution NMR experiments aimed at measuring several (13)C and (1)H spectral and relaxation properties at different temperatures and frequencies. The results were first qualitatively analyzed to identify the motions of the different molecular fragments and to assign them to specific frequency regimes (slow, <10(3) Hz; intermediate, 10(3)-10(6) Hz; and fast, >10(6) Hz). Subsequently, a simultaneous fit of the experimental data sets most sensitive to each frequency range was performed by using suitable motional models, thus obtaining, for each motion, correlation times and activation energies. The motions so characterized were: the rotations of the three methyl groups and of the isobutyl group, occurring in the fast regime, and the π-flip of the phenyl ring, belonging to the intermediate motional regime. The results obtained for the Na-salt form were compared with those of the acidic form of ibuprofen, previously obtained from a similar solid-state NMR approach: despite the very similar chemical structure of the two compounds, their dynamic properties in the solid state are noticeably different.     

Efficient crystallization induced emissive materials based on a simple push-pull molecular structure

Solid state luminescent materials are the subject of ever growing interest both from a scientific and a technological point of view. Aggregation caused quenching (ACQ) processes however represent an obstacle to the development of most luminogens in the condensed phase. This is why particularly fascinating are those materials showing higher emission intensity in the solid state than in solution. Here we report on three 4-dialkylamino-2-benzylidene malonic acid dialkyl esters, very simple push-pull molecules, which are hardly emissive in solution and in the amorphous phase but become good emitters in the crystalline phase according to what has been indicated as crystallization induced emission (CIE). Thanks to combined emission and NMR spectroscopies at different temperatures on the prototype compound 4-dimethylamino-2-benzylidene malonic acid dimethyl ester in solution, we give full evidence that a restricted intramolecular rotation (RIR) phenomenon, in particular the hindered rotation around the aryl main axis of the compound, is at the origin of this behaviour. In addition, solid state photophysical and X-ray diffraction structural characterization allow us to identify J-dimeric interactions as responsible for the particularly intense emission of two of the three compounds. Moreover, by exploiting the compounds' acidochromic properties, applications in sensors and optoelectronics are envisaged.