Recognition of filtered words in noise at higher-than-normal levels: decreases in scores with and without increases in masking

To examine spectral effects on declines in speech recognition in noise at high levels, word recognition for 18 young adults with normal hearing was assessed for low-pass-filtered speech and speech-shaped maskers or high-pass-filtered speech and speech-shaped maskers at three speech levels (70, 77, and 84 dB SPL) for each of three signal-to-noise ratios (+8, +3, and -2 dB). An additional low-level noise produced equivalent masked thresholds for all subjects. Pure-tone thresholds were measured in quiet and in all maskers. If word recognition was determined entirely by signal-to-noise ratio, and was independent of signal levels and the spectral content of speech and maskers, scores should remain constant with increasing level for both low- and high-frequency speech and maskers. Recognition of low-frequency speech in low-frequency maskers and high-frequency speech in high-frequency maskers decreased significantly with increasing speech level when signal-to-noise ratio was held constant. For low-frequency speech and speech-shaped maskers, the decline was attributed to nonlinear growth of masking which reduced the "effective" signal-to-noise ratio at high levels, similar to previous results for broadband speech and speech-shaped maskers. Masking growth and reduced "effective" signal-to-noise ratio accounted for some but not all the decline in recognition of high-frequency speech in high-frequency maskers.     

Nucleation time of nanoscale water bridges

Water capillaries bind together grains of sand. They also can bind an atomic force microscope tip to a substrate. The kinetics of capillary condensation at the nanoscale is studied here using friction force microscopy. At 40% relative humidity we find that the meniscus nucleation times increase from 0.7 to 4.2 ms when the temperature decreases from 332 to 299 K. The nucleation times grow exponentially with the inverse temperature 1/T obeying an Arrhenius law. We obtain a nucleation energy barrier of 7.8 x 10(-20) J and an attempt frequency ranging between 4 and 250 GHz, in excellent agreement with theoretical predictions. These results provide direct experimental evidence that capillary condensation is a thermally activated phenomenon.     

Dynamic processes in the Venice region outlined by environmental isotopes

Research carried out in the last 40 years has shown the scientific importance of groundwater circulation both in the Northern Adriatic sea bed and within the uppermost sedimentary layers of the Venice lagoon and of the Venice plain. Hydrodynamic processes are strictly controlled by a well-cemented sedimentary horizon lying under and around Venice ('caranto'), which plays the role of regional aquitard. This layer was attributed to the subaerial cementation of the Flandrian (8-10 ka Before Present) sedimentary surface. The caranto is generalised as a continuum horizon, being an easy explanation for several environmental, hydrogeological and geotechnical problems, e.g., a base layer for landfills, a confining layer for deep aquifers and the best substratum for locating the oak wooden pile-dwelling needed to support the largest buildings. The preservation of the isotope signal within the deep aquifers and aquiclude system records the changes in surface and groundwater characteristics and suggests the present and past recharge regimes. In this region, the heavily perturbed hydrodynamic conditions do not allow for the use of isotopic signals to derive a correct reconstruction of the present recharge. The perturbations induced by the intensive anthropogenic activity force to follow climate evolution by considering deep groundwater and pore waters. In addition, the presence of carbonatic rocks inside terrigeneous sediments affects the reconstruction of the past. Results indicate that carbonatic rocks are created by seepage, through the sediments, of gaseous carbon compounds from decaying organic layers. The gas interactions with the intra-sedimentary saline and fresh waters produce CO2, inducing the cementation of the sediments.     

Widely tunable continuous-wave diode-pumped 2-microm Tm-Ho:KYF4 laser

Continuous-wave laser action at approximately 2 microm is demonstrated in a Tm-Ho:KYF4 single crystal at room temperature. Crystal growth, spectroscopic measurements, and laser results are presented. An output power in excess of 250 mW is obtained with a tuning range of 99 nm, the largest ever published, to our knowledge, for Tm-Ho in any crystalline host.     

Synthetic peptides in the diagnosis of HIV infection

Peptide-based enzyme-linked immunosorbent assays have been found to be enough sensitive and specific for the diagnosis of human immunodeficiency virus specific antibodies in acquired immunodeficiency syndrome patients. This review provides an overview of the most important peptides developed for use as synthetic antigens in immunodiagnosis of HIV-infected patients. In particular, many studies have been devoted to discriminate between the two retroviruses HIV-1 and HIV-2, as well as different subtypes.     

A new approach to the statistical treatment of 2D-maps in proteomics using fuzzy logic

A new approach to the statistical treatment of 2D-maps has been developed. This method is based on the use of fuzzy logic and allows to take into consideration the typical low reproducibility of 2D-maps. In this approach the signal corresponding to the presence of proteins on the 2D-maps is substituted with probability functions, centred on the signal itself. The standard deviation of the bidimensional gaussian probability function employed to blur the signal allows to assign different uncertainties to the two electrophoretic dimensions. The effect of changing the standard deviation and the digitalisation resolution are investigated.     

Acetylation of aromatic ethers using acetic anhydride over solid acid catalysts in a solvent-free system. Scope of the reaction for substituted ethers

The acetylation of aryl ethers using acetic anhydride in the presence of zeolites under modest conditions in a solvent-free system gave the corresponding para-acetylated products in high yields. The zeolite can be recovered, regenerated and reused to give almost the same yield as that given when fresh zeolite is used.     

Monitoring dediazoniation product formation by high-performance liquid chromatography after derivatization

A derivatization protocol that exploits the rapid reaction between arenediazonium ions and a suitable coupling agent followed by high-performance liquid chromatography analyses of the reaction mixture was employed to determine the product distribution, the rate constants for product formation and the association constant of 4-nitrobenzenediazonium, PNBD, ion with beta-cyclodextrin, beta-CD. The derivatization of PNBD with the coupling agent leads to the formation of a stable azo dye that prevents by-side reactions of PNBD with the solvents of the mobile phase, including water, or the metallic parts of the chromatographic system that would eventually lead to erroneous identification and quantification of dediazoniation products. The results show that in the presence of beta-CD, nitrobenzene is formed at the expense of 4-nitrophenol, which is the major product in its absence. The observed rate constants for the interaction between PNBD and beta-CD increase upon increasing [beta-CD] showing a saturation profile indicative of the formation of an inclusion complex between PNBD and beta-CD. By fitting the experimental data to a simplified Lineaweaver-Burk equation, the corresponding association constant and the maximum acceleration rate of beta-CD towards PNBD were estimated. The protocol is applicable under a variety of experimental conditions provided that the rate of the coupling reaction is much faster than that of dediazoniation.     

Production study of high specific activity NCA Re-186g by proton and deuteron cyclotron irradiation

Very high specific activity (A_S) ^186gRe could be produced by either proton or deuteron cyclotron irradiation on highly enriched ¹⁸⁶W target in no-carrier-added (NCA) form, leading to a A_S very close to the theoretical carrier free (CF) value of 6.88 GBq μg⁻¹. Thick Target Yields (TTYs), obtained irradiating both thick metal W targets of natural isotopic composition and highly enriched powdered ¹⁸⁶W targets, were measured at different particles energies taking into account high accuracy and precision. The evaluation of radionuclidic purities of ^186gRe obtained activating highly enriched ¹⁸⁶W by both p and d were also carried out and accurately compared. The thin-target excitation functions for all Re (A = 181, 182, 183, 184, 186 and their metastable levels), and W and Ta coproduced radionuclides will be presented elsewhere in deep details.     

A new multidimensional integral relationship between heat flux and temperature for direct internal assessment of heat flux

This paper derives a new integral relationship between heat flux and temperature in a transient, two-dimensional heat conducting half space. A unified mathematical treatment is proposed that is extendable to higher-dimensional and finite-region geometries. The analytic expression provides the local heat flux perpendicular to the front surface solely based on an embedded line of temperature sensors parallel to the surface. The relationship does not require apriori knowledge of the surface boundary condition. A new sensor strategy is analytically conceived based on the integral relationship for estimating the local, in-depth heat flux without surface instrumentation. It should further be clarified that the integral relationship requires only knowledge of the local, in-depth temperature and heating/cooling rate (time rate of change of temperature). The resulting formulation is mildly ill-posed and either requires digital filtering of the temperature signal to remove high frequency components of noise or the development of direct heating/cooling rate sensors. This paper (a) develops the new mathematical relationship; (b) demonstrates that the proposed relationship reduces to well-known (i) one-dimensional results under the appropriate assumptions; and, (ii) two-dimensional surface results; and, (c) provides a simple numerical example validating the concept.