Determination of Folic Acid by CE in Various Cultivated Variety of Lentils

A simple extraction and determination method for folic acid (FA) in lentil samples was developed employing capillary electrophoresis. The analysis was performed in a 75 μm ID fused silica capillary using a running buffer of 10 mM sodium borate (10%, v/v, methanol, pH 9) at +18 kV and a detection wavelength at 200 nm. Methylparaben was used as the internal standard. FA signal response was linear in the range between 1.2 × 10^?5 and 4.8 × 10^?5 M. Limit of detection (inter-day) was determined at 6.12 × 10^?7 M (3.3 σs^?1). The amount of FA found in green, red and mignon lentils was found to range between 0.408 and 0.742 mg g^?1.     

Natural radioactivity in soil samples of Kocaeli basin, Turkey

The city of Kocaeli is in the western part of Anatolia in Turkey and has a population of approximately 1.000.000. There is no information about radioactivity in the Kocaeli soils samples so far. For this reason, the concentrations of the natural radionuclides in soil samples from 27 different sampling stations in Kocaeli Basin and its surroundings have been determined. The results have been compared with other radioactivity measurements in different country"s soils. The typical concentrations of ¹³⁷Cs, ²³⁸U, ⁴⁰K, ²²⁶Ra, ²³²Th found in surface soil samples ranged from 2±0.6 to 25±6 Bq/kg, from 11±4 to 49±10 Bq/kg, from 161±30 to 964±127 Bq/kg, from 10±4 to 58±11 Bq/kg, and from 11±3 to 65±13 Bq/kg, respectively.     

Polypyrrole electrodeposition on inorganic semiconductors CuInSe2 and CuInS2 for photovoltaic applications

Thin polypyrrole (PPy) layers with an average thickness of about 0.5 μm were deposited, using potentiostatic and galvanostatic techniques, on CuInSe₂ (CISe) structures prepared electrochemically on glass/ITO substrates and on CuInS₂ (CIS) structures fabricated on Cu tape substrates. The polymer layer of p-type is considered as an alternative to the traditional buffer layer and window layer in the conventional cell structure. The deposition proceeded from an aqueous solution containing sodium naphthalene-2-sulfonate as a dopant. In order to prepare stable PPy films of high quality with a good adherence to the surface of inorganic semiconductors CIS and CISe, the optimal concentrations of reagents, current densities and electrodepositing potentials were selected experimentally. Electrochemical polymerization of pyrrole to PPy on CIS surfaces is faster under white light irradiation and the polymerisation starts at lower potential than in the dark. Significant photovoltage and photocurrent of the fabricated CISe/PPy and CIS/PPy structures have been observed under standard white light illumination.     

Assesment of dimethyl phthalate removal from aqueous phase using barium hexaferrite containing magnetic beads

The barium hexaferrite (BaFe(12)O(19)) containing magnetic poly (ethylene glycol dimethacrylate-vinyl pyridine; mag-poly [EGDMA-VP]) beads (average diameter=53-212 μm) were synthesized and characterized. Their use as an adsorbent in the removal of dimethyl phthalate (DMP) from an aqueous solution was investigated. The mag-poly (EGDMA-VP) beads were prepared by copolymerizing of 4-vinyl pyridine (VP) with ethylene glycol dimethacrylate (EGDMA). The mag-poly (EGDMA-VP) beads were characterized by N(2) adsorption/desorption isotherms (BET), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), elemental analysis, scanning electron microscope (SEM), and swelling studies. At a fixed solid/solution ratio, the various factors affecting the adsorption of DMP from aqueous solutions such as pH, initial concentration, contact time, and temperature were analyzed. The maximum DMP adsorption capacity of the mag-poly (EGDMA-VP) beads was determined as 96.2 mg/g at pH 3.0, 25 °C. All the isotherm data can be fitted with both the Langmuir and the Dubinin-Radushkevich isotherm models. The pseudo-first-order, pseudo-second-order, Ritch-second-order, and intraparticle diffusion models were used to describe the adsorption kinetics. The thermodynamic parameters obtained indicated the exothermic nature of the adsorption. The DMP adsorption capacity did not change after 10 batch successive reactions, demonstrating the usefulness of the magnetic beads in applications.     

Complexation and transport of amino acid esters and their salts with synthesised chiral novel aza crown ether derivatives

The syntheses of four aza-15-crown-5 ethers bearing phenyl and phenoxymethyl moieties attached to a stereogenic centre on the crown ring were achieved. Macrocycles have exhibited strong binding ability (K_a = 5364–12,969 M^? 1) and modest enantiomeric discrimination towards the enantiomers of amino acid methyl ester salts by UV titration method in CHCl₃ at 25°C. Computer modelling results supported experimental data providing a detailed understanding of the molecular recognition mode between hosts and guests and the likely binding sites involved. Macrocycles were used for chiral discrimination of amino acids in their zwitterionic forms or as potassium and sodium salts in transport experiments across a bulk chloroform membrane with satisfactory selectivity.     

Alternative Synthesis of A C,C-Diacetylenic Phosphaalkene

Abstract

Bis(trimethylsilyl)-terminated C,C-diacetylenic phosphaalkene was prepared from Mes*PCl₂ and a propargylic Grignard reagent that in turn was formed from 3-bromo-1,5-bis(trimethylsilyl)penta-1,4-diyne and Rieke-Mg.     

Synthesis and Characterization of Aminophosphines,Bis(amino)phosphine Derivatives,and Their Molybdenum(0) Complexes

Functionalized bis(amino)phosphines of the type PhP(NHR)₂ ( 1a–c ) and aminophosphines of the type Ph₂PNHR ( 2a–c ) have been synthesized by treating PhPCl₂ or Ph₂PCl with corresponding primary amines of H₂N-R where R = -CH₂SO₃H, -C₆H₄SO₃H, and benzo-15-crown-5. The molybdenum(0) complex of the aminophosphine ( 3 ) has been obtained by reacting cis-[Mo(CO)₄(bipy)] with aminophosphine ( 2c ). The synthesized aminophosphines, bis(amino)phosphines, and the molybdenum(0) complex have been characterized by IR, ¹H NMR, ³¹P NMR, and MS spectroscopic techniques and by elemental analysis.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

Synthesis of Dopamine,Rotigotin, Ladostigil,Rasagiline Analogues 2-Amino-4,5,6-trimethoxyindane, 1-Amino-5,6,7-trimethoxyindane,and Their Sulfamide Derivatives

Dopamine, rotigotin, ladostigil, and rasagiline analogues 2-amino-4,5,6-trimethoxyindane and 1-amino-5,6,7-trimethoxyindane were synthesized starting from 5,6,7-trimethoxyindan-1-one for the first time with 34% and 45% total yields. α-Carboxylation of indanone, reduction of ketone group with Et₃SiH, basic hydrolysis of ester, Curtius reaction of the acid, and addition of BnOH afforded the corresponding carbamate. Pd-C-catalyzed hydrogenolysis of carbamate and deprotonation of amine hydrochloride with NaOH gave the dopamine and rotigotin analogue 2-aminoindane. Reduction of 5,6,7-trimethoxyindan-1-one with NaBH₄ afforded the alcohol, which was then converted to the azide derivative via Mitsunobu reaction with diphenylphosphoryl azide; Pd-C catalyzed hydrogenation of the azide to the amine hydrochloride and then deprotonation of the amine hydrochloride with NaOH furnished the ladostigil and rasagiline analogue 1-aminoindane. These amines and BnOH were reacted with CSI to produce sulfamoyl carbamates, which were converted to sulfamides via Pd-C-catalyzed hydrogenolysis reaction with 20% and 25% total yields.