Sol-gel polyimide-silica composite membrane: gas transport properties

The effect of introduction of silica particles prepared by the sol-gel technique on the gas transport properties of a polyimide film was studied. The sorption and permeation of N₂, O₂, CO₂, H₂ and CH₄ were studied and correlated with morphological changes in the polymer structure. From sorption isotherms, we observed that the composite membrane presents higher solubility coefficients than the polyimide one. The solubility coefficient ratio between the composite and the polyimide is about 1.5–2.0. The isotherms were analyzed in terms of the dual mode sorption. The Henry's coefficient and the Langmuir's affinity and saturation constants were obtained allowing to calculate the Langmuir to Henry concentration ratios as function of the gas pressure. These ratios decrease until zero within a certain pressure range as long as the Langmuir's mode is acting and they are higher for the polyimide membrane when compared with the composite one. This study was completed with calorimetric measurements during the sorption. The gas interaction energy in kJ/mol decreases within the same pressure range as previously described. The measured energies are higher for the polyimide film when compared with the composite one because the polyimide membrane presents a stronger energetic effect caused by a higher Langmuir's contribution. From permeation studies at 3.15⁵ Pa, the composite membrane showed higher permeability coefficients and permselectivities than the polyimide one. All these results were explained, taking into account the difference on the imidization degree of both membranes and the morphological changes which may be induced by the silica nodules in the organic/inorganic interphases.     

Effect of molecular weight on the exponential growth and morphology of hyaluronan/chitosan multilayers: a surface plasmon resonance spectroscopy and atomic force microscopy investigation

The layer-by-layer growth of multilayer assemblies of two polysaccharides, the polyanion hyaluronan (HA) and the polycation chitosan (CH), was investigated using atomic force microscopy (AFM) and surface plasmon resonance (SPR) spectroscopy, with primary emphasis on the effect of the polysaccharide molecular weights on the film thickness and surface morphology. The HA/CH multilayers exhibit an exponential increase of the optical film thickness with the number of deposited bilayers. We show that the multilayer thickness at a given stage depends on the size of both CH, the diffusing polyelectrolyte, and HA, the non-diffusing species. Assemblies (12 bilayers) of high molecular weight polysaccharides (HA, 360,000; CH, 160,000) were twice as thick (approximately 900 nm vs approximately 450 nm) as those obtained with low molecular weight polymers (HA, 30,000; CH, 31,000), as assessed by AFM scratch tests. The exponential growth rate is the same for the high and low molecular weight pairs; the larger film thicknesses observed by SPR and by AFM arising from an earlier onset of the steep exponential growth phase in the case of the high molecular weight pair. In all cases, isolated islets form during the deposition of the first CH layer onto the underlying HA. Upon further film growth, individual islets coalesce into larger vermiculate features. The transition from distinct islands to vermiculate structures depends on the molecular weights of the polysaccharides and the lower molecular weight construct presents larger worm-like surface domains than the high molecular weight pair.     

Rapidly self-deoxygenating controlled radical polymerization in water via in situ disproportionation of Cu(i)

Rapidly self-deoxygenating Cu-RDRP in aqueous media is investigated. The disproportionation of Cu(i)/Me₆Tren in water towards Cu(ii) and highly reactive Cu(0) leads to O₂-free reaction environments within the first seconds of the reaction, even when the reaction takes place in the open-air. By leveraging this significantly fast O₂-reducing activity of the disproportionation reaction, a range of well-defined water-soluble polymers with narrow dispersity are attained in a few minutes or less. This methodology provides the ability to prepare block copolymers via sequential monomer addition with little evidence for chain termination over the lifetime of the polymerization and allows for the synthesis of star-shaped polymers with the use of multi-functional initiators. The mechanism of self-deoxygenation is elucidated with the use of various characterization tools, and the species that participate in the rapid oxygen consumption is identified and discussed in detail.

The rapidly self-deoxygenating Cu-RDRP in aqueous media is investigated.     

Functionalization of substituted 2-(1H)pyridones. II. Synthetic pathways to c-6 modified 3-cyano- and 3-carboxy-2-(1H)pyridones from a common precursor

Starting from readily available 1,2-dihydro-6-methyl-2-oxo-3-pyridinecarbonitrile, 1, viable synthetic pathways to a number of C-6 functionalized 1,2-dihydro-2-oxo-3-pyridinecarbonitriles and corresponding acids are presented. Through the utilization of dianion chemistry, the C-6 methyl substituent is selectively functionalized to three different oxidation levels.     

Prostaglandin D2 synthase and its post-translational modifications in neurological disorders

Prostaglandin D2 synthase (PGDS) (beta-trace protein) is a highly abundant cerebrospinal fluid (CSF) glycoprotein. A number of studies have been performed to determine the potential value of this protein for the diagnosis of various neurological disorders. The measurement of total PGDS levels in CSF has proved marginally useful for this purpose, but promising results were obtained while investigating changes in the posttranslational modifications (PTM) pattern. Using 2-DE analysis, we previously showed that PGDS is differentially expressed in ante- and post mortem CSF samples. In the present study, we examined whether the PGDS isoforms may help to distinguish stroke and neurodegenerative disease patients from healthy subjects. The pattern of PGDS PTM was analyzed in CSF from patients with various neurological disorders (n = 44) using IEF/immunoblotting techniques. Strong alterations of this pattern were detected in patients with different forms of degenerative dementia. These findings are consistent with PGDS being altered in some neurological diseases and provide new opportunities for clinical applications.     

Different strategies to assess Cu and Pb mobilization in polluted river sediments

Summary For studying the mechanisms of trace metal mobilization in sediments several strategies have been employed, such as single extraction, sequential extractions, ion exchange, or progressive acidification. Several authors assert that sequential extraction is the best option. In this study two procedures are used in order to assess the mobility of copper and lead in heavily polluted river sediments: sequential extraction using a modified Tessier procedure, and progressive acidification, using an automated method. Six heavily polluted sediment samples are studied by applying the two procedures. The amount of metal released at different pH-values (pH 5 and pH 2) is compared with the resulting distribution when the sequential extraction procedure is applied. The information obtained from the two different approaches is discussed. For both metals a different behaviour is observed when applying each of the two procedures. Thus, copper is more easily released than lead when progressive acidification is followed, whereas an inverse situation is observed when sequential extraction is applied.     

PHYSIOLOGICAL RELATIONSHIPS BETWEEN PHYTOCHROME EFFECTS ON INTERNODE EXTENSION GROWTH AND DRY MATTER ACCUMULATION INLIGHT-GROWN MUSTARD

The physiological relationships between the effects of phytochrome photoequilibrium (Pfr/P) on internode extension growth and dry matter accumulation were investigated in white light (WL)-grown Sinapis alba L. seedlings. After 11 days under continuous WL, the seedlings were exposed: (a) to pulses of light providing different Pfr/P, followed by 24 h darkness (D); (b) to pulses of light providing different Pfr/P, followed by 3 h D and 24 h continuous WL; (c) to continuous WL with or without supplementary far-red light (to reduce Pfr/P); or (d) to pulses of light providing different Pfr/P followed by D, in factorial combination with either water or a saturating (0.2 M) sucrose solution applied to one of the leaves. In D (“a” and “d”) low, compared to high Pfr/P increased both internode extension growth and dry weight to the same extent. Under WL (“b” and “c”) low PfrlP promoted internode extension growth but had no proportional effects on internode dry weight. Sucrose promoted internode extension growth with a lag of at least 8 h (compared to the rapid effect of low Pfr/P) and did not reduce the effect of low Pfr/P. These results indicate that Pfr/P effects on internode extension growth are not the consequence of changes in photoassimilate translocation from the leaves. Under WL, PfdP effects on internode length occur partially at the expense of internode dry matter per unit length.     

Pollutants leaching behaviour from solidified wastes: a selection of adapted various models

Leaching tests are essential in the environmental assessment of stabilized wastes. Research programmes were conducted on their interpretation in order to develop tools for the evaluation of long term release of pollutants contained in solidified wastes. Models for the leaching of porous materials are discussed in this paper according to the specificity of the chemical species (i.e. transport model with total dissolution of species-diffusional model; transport model with progressive dissolution of species due to limitation of solubility-shrinking core model; and the model coupling transport and chemical phenomena). The leaching behaviour of pollutants (i.e. lead) solidified in a cement matrix was studied under different chemical conditions. Results have shown that the release of species whose solubilities depend on the physico-chemical conditions, and especially the pH (e.g. amphoteric metals), is governed by the solubility of the species in the pore water at local conditions and by the pH evolution within the matrix. A coupled dissolution/diffusion model was developed to describe the release of chemically complex species contained in a porous medium in contact with water. Leaching tests of cement matrices and artificial porous matrices containing calcium hydroxide and pollutants were conducted in order to validate the coupled dissolution/diffusion model. A good assessment of the retention of some pollutants contained in cement matrices could then be obtained by the association of two tests: solubilization of the pollutants related to the chemical context (pH) under steady state conditions and monolithic long term dynamic leaching tests in order to characterize the evolution of the chemical context (pH) and consequently the release of pollutants. The objective is to integrate this approach in the standardization process (CEN TC 292- WG 6, in progress).     

Evaluation of 40K in food by determining total potassium using neutron activation analysis

Summary Potassium is an extremely important major element to the human body. Potassium is made up of three isotopes with abundances of ³⁹K at 93.1%, ⁴⁰K at 0.0118% and ⁴¹K at 6.88%. It is also very well known that ⁴⁰K with its 1.3 ^. 10⁹ years half-life is a major naturally occurring isotope in the body and food. The usual way to determine total ⁴⁰K is to measure the single 1460.8 keV photon from beta-decay. However, this procedure requires a significant amount of sample and typical counting periods of at least a day in well-shielded germanium counting system. Another approach is to determine total potassium via neutron activation analysis using the well known ⁴¹K(n,g)⁴²K (T_1/2 = 12.8 h) reaction and then evaluate ⁴⁰K using the usual activity equation A = lN. In our laboratory we have effectively used epithermal neutron activation analysis and Compton suppression to determine potassium in air filters and other geological material. Upwards to 10-15 samples can be analyzed in one day using only gram quantities of material. In such way one can increase the output of determining ⁴⁰K by at least one order of magnitude. Results of a detailed investigation optimization of the methodology, quality control and detection limits will be presented for reference material and various food samples.     

Structural control in self-standing mesostructured silica oriented membranes and xerogels

Large pore (a = 150-200 A) wormlike and highly oriented cubic (IM3m space group) and 2D-hexagonal (P6m) mesostructured xerogels have been reproducibly synthesised by Evaporation-Induced Self Assembly (EISA). Mesostructure control was attained by changing the template (nonionic block copolymer) and water (h = [H2O]/[Si]) ratio.