On the Structure of Syndiotactic Poly(propylenes)

Propylene was polymerized with the catalyst system (C₂H₅)2A1C1/ VCk/ anisole at -78°C using various conditions. The resulting polymers were successively extracted by diethyl ether, hexane, and heptane, leaving the residue. The polymers of the four series were characterized by intrinsic viscosity, gel permeation chromatography, ¹³C nuclear magnetic resonance, infrared spectroscopy, x-ray diffraction, and by differential scanning calorimetry. The combined evidence from the various methods indicates that this catalyst system leads to stereoblock polymers which can be fractionated according to stereochemical composition and sequence length.     

Characterization of Molecular Weight Distributions by the Standard Deviation

The standard deviation [sgrave] is known to be an absolute measure of Gaussian (G) distributions, because it (or multiples of it) always determines a constant fraction of the material. However, this is not true for distribution functions other than Gaussian. The weight fractions corresponding to weight standard deviations (±[sgrave]_w) of Schulz-Flory distributions depend on the polymolecularity index xw/xn, approaching a limiting value of W(x_w ± [sgrave]_w) = 86.5 for x_w/x_n →∞. The use of weight standard deviations is meaningless for generalized logarithmic normal (LN) distributions if x_w/x_n 52. The weight fractions W(X_n ± [sgrave]_n) around the number-average degree of polymerization of G and LN distributions first go through a maximum before decreasing with increasing x_w/x_n. The weight fractions W(x_n ± [sgrave]_n) decrease steadily with higher x_w/x_n.     

Taguchi orthogonal design assisted immobilization of Candida rugosa lipase onto nanocellulose-silica reinforced polyethersulfone membrane: physicochemical characterization and operational stability

Cellulose - A greener processing route to replace the current environmentally-unfriendly esterification technique to produce biofuels such as pentyl valerate (PeVa) was explored. This study...     

SYNTHESIS OF MONO-AND DIALKYLPHOSPHATES BY THE REACTIONS OF HYDROXYCOMPOUNDS WITH THE PHOSPHORUS PENTAOXIDE UNDER MICROWAVE IRRADIATION

The reactions of phosphorus pentoxide with two alcohols and one phenol were performed in different conditions under microwave irradiation. The products (alkylphosphates and dialkylphosphates) were identical to those formed by classic heating and were obtained with better yields. The speed of the reaction was increased by a factor from 100 to 4000.     

Equivalence of Ensembles,Condensation and Glassy Dynamics in the Bose–Hubbard Hamiltonian

Journal of Statistical Physics - We study mathematically the equilibrium properties of the Bose–Hubbard Hamiltonian in the limit of a vanishing hopping amplitude. This system conserves the...     

Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

Development and validation of a RP-HPLC method for Roflumilast and its degradation products

Roflumilast is a phosphodiesterase type 4 inhibitor that is administered orally as a long-term, in the clinical treatment of chronic obstructive pulmonary disease and asthma. Launched in 2010 for the European market, it currently does not have an official monograph. Here, a reproducible gradient RP-HPLC method was developed and validated for the separation and determination of Roflumilast in the presence of its six major degradation products. Separation was performed on a C₁₈ analytical column (250?×?4.6?mm, 5?µm) with a mobile phase-A of ACN and a phase-B of ammonium acetate buffer (5?mM, pH 4.2) containing triethylamine (0.5% v/v). The most effective RP-HPLC gradient program was determined to be 0/80, 35/10, 36/80, 40/80 (time in minutes/% mobile phase-B). The flow rate was 1.0?ml/min and the column temperature was 25°C. The success of separation of the degradation products with different chemical characteristics was obtained by extending the time of the gradient, changing the proportion of the mobile phases and increasing the velocity of the flow. Two detectors were evaluated for the identification of degradation products and Roflumilast: a diode-arrary detector and a charged aerosol detector. The inability of the charged aerosol detector to dectect one of the six degradation products indicated that the method developed with RP-HPLC and the diode-array detector was more suitable for Roflumilast analysis. The method was validated according to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.