Physically self-assembled monolayers (PSAMs) of lecithin lipids at hydrophilic silicon oxide interfaces

A new method of making physically self-assembled monolayers (PSAMs) on hydrophilic solid surfaces is presented. This method uses a mixture of a nonpolar solvent, such as hexane, and a strong polar solvent, such as ethanol, to dissolve the lipids. The deposition of two lecithin lipids, dipalmitoylphosphatidylcholine (DPPC) and dilauroylphosphatidylcholine (DLPC), has been studied. These lipids physically self-assemble, or adsorb, onto hydrophilic silicon oxide/silicon surfaces when such surfaces are in contact with the lipid solution. The adsorbed layers were probed with ex-situ attenuated total reflection infrared (ATR-IR) spectroscopy, ellipsometry, contact angle measurements, and atomic force microscopy (AFM). The thicknesses of the adsorbed monolayers are about 2.8 +/- 0.2 nm for DPPC and 2.0 +/- 0.2 nm for DLPC, as determined by ellipsometry and AFM. Smooth, uniform monolayers of controlled surface density are formed. The surface density of adsorbed layers is comparable to those of close-packed lipid monolayers, as calculated from the ellipsometry and ATR-IR results. Producing controlled-thickness monolayers has applications in boundary lubrication, biomaterials, sensor technologies, and electronics. The method can be used for depositing many biological surfactants or lipids without the need to modify these surfactants chemically to form chemical bonds with the surfaces, as required by the usual chemical SAMs. Moreover, the new method has several advantages compared to the Langmuir-Blodgett (LB) method.     

Synthesis and Characterization of Ferrocene Derived Cyclic Carbaphosphazenes

Dialkylamino substituted cyclic carbaphosphazenes, (R 2 NCN) 2 (NPCl 2 ) were prepared and reacted with the ferrocene derived hydroxymethyl phosphine sulfide FcCH(CH 3 )P(S)(CH 2 OH) 2 after dilithiation to yield a series of new spirocyclic derivatives of cyclic carbaphosphazenes having ferrocenyl pendant groups. To confirm the formation of six membered spirocycles and to compare their spectral features, transesterification reactions of FcCH(CH 3 )P(S)(CH 2 OH) 2 also were carried out with P(NR 2 ) 3 , yielding the six membered heterocycles FcCH 2 P(S)(CH 2 O) 2 PNR 2 (R = Me, Et). The compounds were characterized by 1 H, 31 P, 13 C NMR, mass spectra, and elemental analysis.     

Electrochemical and photochemical approaches for the synthesis of the C28–C38 fragment of okadaic acid

Okadaic acid, a potent and selective inhibitor of Protein Phosphatases 1 and 2A (PP1 and PP2A), is widely used as a probe for various biochemical processes. We describe herein two innovative methods for the synthesis of the terminal C28–C38 fragment of the natural polyether. Suárez photochemical oxidative cyclization and electrochemical oxidation of malonates to their ketals equivalents have been successfully applied for the assembly of the key spiroketal core.     

Antioxidant activity of novel indole derivatives and protection of the myocardial damage in rabbits

Novel indole derivatives containing a triazole moiety (1a-d, 2a-c) were synthesized as lead compounds with interesting pharmacological profiles. Their antioxidant activity was investigated on in vitro non-enzymatic rat hepatic microsomal lipid peroxidation. All compounds showed significant effect in the above assay. The effect depended mainly on the attachment position of the triazole moiety on the indole nucleus. The most potent antioxidant derivatives la, 1c and 1d were tested for their protective ability against the oxidative damage of the myocardium after ischemia-reperfusion, in male rabbits which were subjected to 30 min regional ischemia followed by reperfusion. The tested antioxidant compounds 1a, 1c and 1d were continuously infused for 30 min starting at 10th min of ischemia and lasted at 10th min of reperfusion. The concentration of malondialdehyde (MDA, a marker of lipid peroxidation) and hemodynamic parameters (blood pressure and heart rate) were measured in the baseline, at 20th min of the sustained ischemia, 1st and 20th min of reperfusion. It was found that the examined compounds la, 1c and 1d reduced significantly the level of MDA in rabbits under ischemia-reperfusion and proved to be promising substances for further evaluation of anti-ischemic properties.     

Inhibition of UVB-mediated oxidative stress and markers of photoaging in immortalized HaCaT keratinocytes by pomegranate polyphenol extract POMx

In recent years there has been an increase in use of botanicals with antioxidant properties as skin photoprotective agents. Pomegranate (Punica granatum L.) fruit possesses strong antioxidant and antiinflammatory properties. Recently, we have shown that pomegranate-derived products rich in anthocyanidins and ellagitannins inhibit UVB-mediated activation of nuclear factor kappa B and modulate UVA-mediated cell proliferation pathways in normal human epidermal keratinocytes. In this study, we evaluated the effect of polyphenol-rich pomegranate fruit extract (POMx) on UVB-induced oxidative stress and photoaging in human immortalized HaCaT keratinocytes. Our data show that pretreatment of HaCaT cells with POMx (10-40 microg mL(-1)) inhibited UVB (15-30 mJ cm(-2))-mediated (1) decrease in cell viability, (2) decrease in intracellular glutathione content and (3) increase in lipid peroxidation. Employing immunoblot analysis we found that pretreatment of HaCaT cells with POMx inhibited UVB-induced (1) upregulation of MMP-1, -2, -7 and -9, (2) decrease in TIMP-1, (3) phosphorylation of MAPKs and (iv) phosphorylation of c-jun, whereas no effect was observed on UVB-induced c-fos protein levels. These results suggest that POMx protects HaCaT cells against UVB-induced oxidative stress and markers of photoaging and could be a useful supplement in skin care products.     

Comparative investigation of the cleavage step in the synthesis of model peptide resins: implications for Nalpha-9-fluorenylmethyloxycarbonyl-solid phase peptide synthesis

Based on our studies of the stability of model peptide-resin linkage in acid media, we previously proposed a rule for resin selection and a final cleavage protocol applicable to the Nalpha-tert-butyloxycarbonyl (Boc)-peptide synthesis strategy. We found that incorrect choices resulted in decreases in the final synthesis yield, which is highly dependent on the peptide sequence, of as high as 30%. The present paper continues along this line of research but examines the Nalpha-9-fluorenylmethyloxycarbonyl (Fmoc)-synthesis strategy. The vasoactive peptide angiotensin II (AII, DRVYIHPF) and its [Gly8]-AII analogue were selected as model peptide resins. Variations in parameters such as the type of spacer group (linker) between the peptide backbone and the resin, as well as in the final acid cleavage protocol, were evaluated. The same methodology employed for the Boc strategy was used in order to establish rules for selection of the most appropriate linker-resin conjugate or of the peptide cleavage method, depending on the sequence to be assembled. The results obtained after treatment with four cleavage solutions and with four types of linker groups indicate that, irrespective of the circumstance, it is not possible to achieve complete removal of the peptide chains from the resin. Moreover, the Phe-attaching peptide at the C-terminal yielded far less cleavage (50-60%) than that observed with the Gly-bearing sequences at the same position (70-90%). Lastly, the fastest cleavage occurred with reagent K acid treatment and when the peptide was attached to the Wang resin.     

Ring-closing metathesis reactions of terminal alkene-derived cyclic phosphazenes

The first examples of ring-closing metathesis (RCM) reactions of a series of terminal alkene-derived cyclic phosphazenes have been carried out. The tetrakis-, hexakis-, and octakis(allyloxy)cyclophosphazenes (NPPh(2))(NP(OCH(2)CH=CH(2))(2))(2) (1), N(3)P(3)(OCH(2)CH=CH(2))(6) (2), and N(4)P(4)(OCH(2)CH=CH(2))(8) (3) and the tetrakis(allyloxy)-S-phenylthionylphosphazene (NS(O)Ph)[NP(OCH(2)CH=CH(2))(2)](2) (4) were prepared by the reactions of CH(2)=CHCH(2)ONa with the cyclophosphazenes (NPPh(2))(NPCl(2))(2), N(3)P(3)Cl(6), and N(4)P(4)Cl(8) and the S-phenylthionylphosphazene (NS(O)Ph)(NPCl(2))(2). The reactions of 1-4 with Grubbs first-generation olefin metathesis catalyst Cl(2)Ru=CHPh(PCy(3))(2) resulted in the selective formation of seven-membered di-, tri-, and tetraspirocyclic phosphazene compounds (NPPh(2))[NP(OCH(2)CH=CHCH(2)O)](2) (5), N(3)P(3)(OCH(2)CH=CHCH(2)O)(3) (6), and N(4)P(4)(OCH(2)CH=CHCH(2)O)(4) (7) and the dispirocyclic S-phenylthionylphosphazene compound (NS(O)Ph)[NP(OCH(2)CH=CHCH(2)O)](2) (8). X-ray structural studies of 5-8 indicated that the double bond of the spiro-substituted cycloalkene units is in the cis orientation in these compounds. In contrast to the reactions of 1-4, RCM reactions of the homoallyloxy-derived cyclophosphazene and thionylphosphazene (NPPh(2))[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (9) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (10) with the same catalyst resulted in the formation of 11-membered diansa compounds NPPh(2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (11) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (13) and the intermolecular doubly bridged ansa-dibino-ansa compounds 12 and 14. The X-ray structural studies of compounds 11 and 13 indicated that the double bonds of the ansa-substituted cycloalkene units are in the trans orientation in these compounds. The geminal bis(homoallyloxy)tetraphenylcyclotriphosphazene [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CH(2))(2)] (15) upon RCM with Grubbs first- and second-generation catalysts gave the spirocyclic product [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)] (16) along with the geminal dibino-substituted dimeric compound [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)(2)PN][NPPh(2)](2) (17) as the major product. The dibino compound 17, upon reaction with the Grubbs second-generation catalyst, was found to undergo a unique ring-opening metathesis reaction, opening up the bino bridges and partially converting to the spirocyclic compound 16.     

Kinetic and mechanistic study with optically active, four-coordinate nickel(II) complexes: stereoselectivity in ligand substitution

Conventional and rapid scan stopped-flow spectrophotometry as well as polarimetry was used to study the kinetics of ligand substitution in six chiral bis N-alkylsalicylaldiminato nickel(II) complexes NiA2 by different chiral salen-type ligands H2B, according to NiA2 + H2B --> NiB + 2HA, in acetone at 298 K and, partly, at variable temperature. In most cases ligand substitution was found to follow monophasic second-order kinetics, rate = k x [NiA2] x [H2B]. Second-order rate constant k, lying in the range 10(-2)-400 M(-1) s(-1) at 298 K, was determined for the various combinations of enantiomers in a given system NiA2/H2B, namely, R-NiA2/R-H2B, S-NiA2/R-H2B, R-NiA2/S-H2B, and S-NiA2/S-H2B. It was found that ligand substitution is subject to chiral discrimination. The ratio of second-order rate constants, kfast/kslow, with kfast being rate constant k for the faster reacting pair of enantiomers and vice versa, lies in the range 1.0-3.0, depending on the nature of the N-alkyl groups in NiA2 and organic groups attached to the ethylene bridge in the salen ligands H2B. The rate discrimination factor of 3.0, as obtained for NiA2 = bis[N-dehydroabietylsalicylaldiminato]nickel(II) reacting with the R- and with the S-enantiomer of H2B = N,N'-disalicylidene-1,2-diamino-4-methylpentane, appears to be the highest stereoselectivity reported so far for ligand substitution in nickel(II) complexes. With NiA2 = R- and S-bis[N-(1-phenylethyl)-5-nitrosalicylaldiminato]nickel(II) and H2B = R- and S-N,N-disalicylidene-1,2-diamino-4-methylpentane, the kinetics of ligand substitution are biphasic, describing initial adduct formation between NiA2 and H2B (equilibrium constant K) and stepwise loss of the two bidentate ligands HA (first-order rate constants k1 and k2). The data for K, k1, and k2 for one of the combinations of enantiomers were determined at variable temperature, and the corresponding activation parameters are presented.     

GC–MS with photoionization of cold molecules in supersonic molecular beams—Approaching the softest ionization method

A new type of photoionization ion source was developed for the ionization of cold molecules in supersonic molecular beams (named Cold PI). The system was based on a GC–MS with supersonic molecular beams and its fly‐through EI of cold molecules ion source (Cold EI) plus quadrupole mass analyzer. A continuously operated deuterium VUV photoionization lamp was added and placed above and between the supersonic nozzle and skimmer whereas the Cold EI ion source served only as a portion of the ion transfer ion optics. The supersonic nozzle and skimmer were voltage biased and the VUV light crossed the supersonic expansion about 10 mm from the nozzle. We obtained over three orders of magnitude enhancement in the relative abundance of the molecular ion of squalane in Cold PI versus in photoionization of this compound as a thermal compound. Accordingly, we also proved that standard photoionization is not as soft ionization method as previously perceived for large compounds. We found that Cold PI is as soft as and possibly softer than field ionization; thus, it could be the softest known ionization method. The ionization yield was about 200–300 times weaker than with Cold EI yet our limit of detection was about 200 femtogram in SIM mode for cholesterol and pyrene which is reasonable. Practically, all hydrocarbons gave only molecular ions with rather uniform response whereas alcohols gave some molecular ions plus major fragment ions particularly with a loss of water (similarly to field ionization). We tested Cold PI in the GC–MS analysis of diesel fuels and analyzed the time averaged data for group type information. We also found that we can analyze the diesel fuels by fast under 20‐s flow injection analysis in which the generated averaged mass spectrum of molecular ions only could serve for the characterization of fuels.